Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Introducción

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Información de seguridad

ADVERTENCIA: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Asegúrese de que la energía esté desconectada antes de la instalación.
• Siga todos los códigos eléctricos locales y nacionales.
• Este dispositivo es solo para uso en interiores.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Tornillos de montaje
• Tuercas de alambre
• Manual de instrucciones (este documento)

Configuración e instalación

Herramientas necesarias: Screwdriver, Wire Strippers, Electrical Tape.

1. Apagar la energía: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage probador.
2. Eliminar el interruptor existente: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Imagen: Frente view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Cable de línea: Connect to the timer's LINE terminal.
   • Cable de carga: Connect to the timer's LOAD terminal.
   • Cable a tierra: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Montar el temporizador: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Restaurar energía: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Operación y programación

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Configuración de la hora y el día actuales

1. Presione el RELOJ Botón. La pantalla de la hora parpadeará.
2. Utilice el HORA y MINUTO Botones para ajustar la hora actual.
3. Presione el DÍA para configurar el día de la semana actual.
4. Prensa RELOJ again to save and exit, or wait a few seconds for it to save automatically.

2. Programación de eventos de encendido y apagado

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Presione el PROG Botón. La pantalla mostrará "1 ON".
2. Usar HORA, MINUTO, y DÍA buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Prensa PROG De nuevo. La pantalla mostrará "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the HORA, MINUTO, y DÍA botones.
5. Repita los pasos 1 a 4 para programas adicionales (2 ON/OFF hasta 6 ON/OFF).
6. Después de configurar todos los programas deseados, presione RELOJ para volver al funcionamiento normal.

3. Accionamiento manual

To manually turn the connected device ON or OFF outside of programmed times, press the ENCENDIDO/APAGADO button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Mantenimiento

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Reemplazo de batería: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Limpieza: Clean the timer's surface with a soft, damp Paño. No utilice limpiadores abrasivos ni disolventes.

Solución de problemas

Presupuesto

• Marca: Intermático
• Número de modelo: SS7C
• Peso del artículo: 0.35 libras
• Número de configuraciones: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Tamaño de pantalla: 1.5 pulgadas
• Color: Blanco
• Fabricante: INTERMATIC INC
• Código postal: 078275056732
• ASIN: B0000BYDA2

Garantía y soporte

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Garantía limitada del fabricante de 1 años a partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websitio o consulte los datos de contacto proporcionados con el embalaje de su producto.