Behringer DJX400

Introducción

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

Frente view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

Configuración

Follow these steps to properly set up your DJX400 mixer.

1. Desembalaje e inspección

• Retire con cuidado la batidora de su embalaje.
• Inspeccione la unidad para detectar cualquier daño que pueda haberse producido durante el transporte. Si encuentra algún daño, póngase en contacto con su distribuidor inmediatamente.
• Ensure all accessories, including the power cable, are present.

2. Conexión de fuentes de audio

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. Conexión de salidas de audio

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• Salida REC (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. Conexión de alimentación

• Asegúrese de que el interruptor de encendido del mezclador esté en la posición APAGADO.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

Operante

This section details the functions of the DJX400's controls and how to operate the mixer.

1. Controles de canal

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• Ganar control: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• FADER DE CANAL: Controls the volume level of the individual channel.
• Botón PFL (escucha pre-fader): Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. Crossfader

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• CRUZADO: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Sección Maestra

• NIVEL DE MAESTRÍA: Controls the overall output volume of the mixer to the main PA system.
• BOOTH LEVEL: Adjusts the volume of the BOOTH output for your monitor speakers.
• NIVEL DE MICRÓFONO: Controla el volumen de la entrada del micrófono.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• NIVEL DE AURICULARES: Ajusta el volumen de la salida de auriculares.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

Mantenimiento

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

Limpieza

• Desconecte siempre la batidora de la corriente antes de limpiarla.
• Utilice un paño suave, seco y sin pelusa para limpiar las superficies exteriores.
• Para la suciedad incrustada, un paño ligeramente húmedo.amp Se puede utilizar un paño con jabón suave, seguido de un paño seco.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

Almacenamiento

• Cuando no esté en uso, guarde la batidora en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
• Protect the mixer from dust by covering it with a dust cover.

Solución de problemas

This section addresses common issues you might encounter with your DJX400 mixer.

Presupuesto

Key technical specifications for the Behringer DJX400 DJ Mixer:

Garantía y soporte

Los productos Behringer están diseñados para brindar confiabilidad y rendimiento. Para obtener información detallada sobre la garantía y soporte técnico, consulte el sitio web oficial de Behringer. webVisite el sitio web o contacte a su distribuidor autorizado local. Conserve el recibo de compra como comprobante para cualquier reclamación de garantía.

• Soporte en línea: Visit the official Behringer webSitio para preguntas frecuentes, descargas de software y recursos de soporte.
• Centros de servicio: Localice centros de servicio autorizados para reparaciones y mantenimiento.