Viper 479V Responder Remote Instruction Manual

1. Producto terminadoview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Características principales:

• Comunicación bidireccional: Proporciona confirmación visual y audible cuando los comandos se envían correctamente.
• Rango extendido: Operates with up to 1/2 mile range.
• Pantalla LCD: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Compatibilidad del sistema

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Víbora 542V
• Víbora 434V
• Víbora 554V
• Víbora 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Preparar el vehículo:
   • Abra la puerta del lado del conductor.
   • Inserte la llave en el encendido.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Ingrese al modo de programación:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and sostener it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and sostener it. The car's siren will chirp once.
4. Programa remoto: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Salir del modo de programación: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Prueba remota: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Operación del control remoto

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Funciones básicas:

• Cerrar con llave: Press the lock button to arm your vehicle's security system and lock the doors.
• Descubrir: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Inicio remoto: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Funciones auxiliares: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Mantenimiento

Reemplazo de batería:

The Viper 479V remote requires dos pilas AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Localice la tapa del compartimiento de la batería en la parte posterior del control remoto.
2. Deslice o desenganche con cuidado la tapa para abrir el compartimento.
3. Retire las pilas AAA viejas.
4. Inserte dos pilas AAA nuevas, asegurándose de la polaridad correcta (+/-).
5. Vuelva a colocar la tapa del compartimiento de la batería de forma segura.

Cuidado y manipulación:

• Evite la exposición al agua: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Proteger de las caídas: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Limpiar suavemente: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Temperaturas extremas: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. Solución de problemas

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• El control remoto no responde:
  • Verifique y reemplace las baterías AAA.
  • Asegúrese de estar dentro del rango operativo del vehículo.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Rango reducido:
  • Reemplace las baterías.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• Problemas con la pantalla LCD:
  • Si la pantalla está oscura o en blanco, reemplace las baterías.
  • If the display is physically damaged, the remote may need replacement.
• Botones que no funcionan:
  • Asegúrese de que el control remoto esté limpio y libre de residuos alrededor de los botones.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Especificaciones

8. Información de garantía

The Viper 479V Responder Remote comes with a Garantía del fabricante de 1 añoEsta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Soporte

Para obtener más ayuda, soporte técnico o consultas no cubiertas en este manual, consulte los siguientes recursos:

• Viper oficial Websitio: Visit the official Viper webSitio para actualizaciones de productos, preguntas frecuentes y documentación de soporte adicional.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Servicio al cliente: Refer to your product packaging or the Viper webSitio para obtener información de contacto de servicio al cliente.