Introducción
Thank you for choosing the AMS 7207/1 Wall Clock Pendulum Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.
Figure 1: AMS 7207/1 Wall Clock Pendulum Clock
Información de seguridad
- Ensure the clock is mounted securely to prevent falling and potential injury or damage.
- Mantenga las baterías fuera del alcance de los niños. Si se ingiere, busque atención médica inmediata.
- No mezcle baterías viejas y nuevas, o diferentes tipos de baterías.
- Retire las pilas si el reloj no se utilizará durante un período prolongado para evitar fugas.
- Limpie el reloj con un paño suave y seco. Evite usar limpiadores abrasivos o disolventes.
Contenido del paquete
Por favor, compruebe que todos los artículos estén presentes en el paquete:
- AMS 7207/1 Wall Clock Pendulum Clock
- Manual de instrucciones (este documento)
- Mounting hardware (screws, wall plugs - may vary by region)
Configuración
1. Desembalaje
Carefully remove the clock from its packaging. Inspect for any signs of damage. Retain packaging for future transport or returns.
2. Instalación de la batería
- Locate the battery compartment on the back of the clock movement.
- Inserte una (1) batería AA, asegurándose de que la polaridad (+/-) coincida con los indicadores dentro del compartimiento.
- Cierre la tapa del compartimento de la batería.
3. Configuración de la hora
Once the battery is installed, the clock will automatically search for the atomic time signal. This process may take several minutes. For manual setting:
- Use the small adjustment wheel or button on the back of the clock movement to manually set the time.
- Turn the wheel clockwise until the correct time is displayed.
Figure 2: Close-up of the clock dial
4. Instalación del péndulo
Gently attach the pendulum to the hook or slot provided on the clock movement. Ensure it hangs freely and can swing without obstruction.
5. Montaje del reloj
- Elija una ubicación adecuada en la pared, asegurándose de que sea lo suficientemente resistente para soportar el peso del reloj.
- Mark the desired position for the mounting screw.
- Drill a pilot hole (if necessary) and insert a wall plug.
- Insert a screw, leaving a small portion protruding from the wall.
- Carefully hang the clock onto the screw, ensuring it is stable and level.
Instrucciones de funcionamiento
Registro de Horas de Trabajo
The AMS 7207/1 features a quartz pendulum movement with atomic operation. Once set up, the clock will maintain accurate time. The pendulum is for aesthetic purposes and should swing gently.
Sincronización del tiempo atómico
The clock automatically synchronizes with the atomic time signal, ensuring precise timekeeping. This feature also handles daylight saving time adjustments automatically. Ensure the clock is placed in an area where it can receive a clear signal, away from large metal objects or electronic interference.
Mantenimiento
Limpieza
To clean the clock, gently wipe the surfaces with a soft, dry, lint-free cloth. For the glass, a slightly damp cloth followed by a dry one can be used. Avoid harsh chemicals or abrasive materials that could scratch the finish or glass.
Reemplazo de batería
When the clock hands stop moving or the pendulum stops swinging, it is time to replace the battery. Follow the battery installation steps in the Setup section. Always use a fresh AA battery.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El reloj no funciona | Batería agotada o mal instalada | Replace battery with a fresh AA battery, ensuring correct polarity. |
| Hora incorrecta mostrada | Poor atomic signal reception or manual setting error | Move clock to a location with better signal. Allow time for synchronization. Manually set time if necessary. |
| El péndulo no oscila | Not properly attached or obstructed | Ensure pendulum is correctly hooked and swings freely without touching the clock body. Check battery. |
Presupuesto
- Marca: AMS
- Número de modelo: W7207/1
- Dimensiones: 62 x 7 x 294 cm (approx. 24.41"W x 9.06"H - Note: provided dimensions seem inconsistent, using product title's cm values)
- Peso: 1.1 kilogramos
- Material: Massive walnut wood, lacquered with polished aluminum, satinated mineral glass
- Movimiento: Quartz Pendulum Movement, Atomic Operation
- Tipo de pantalla: Cosa análoga
- Fuente de energía: 1 pilas AA (no incluidas)
- Color: Silver (dial and hands), Brown (wood back)
- Uso en interiores y exteriores: Interior
Garantía y soporte
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official AMS websitio para obtener más ayuda.
Fabricante: AMS
Número de pieza del fabricante: W7207/1