Kidde KN-COPP-B-LP

Kidde Nighthawk Battery Powered Carbon Monoxide Alarm with Digital Display

Model: KN-COPP-B-LP

1. Introducción

The Kidde Nighthawk Carbon Monoxide Alarm, Model KN-COPP-B-LP, is designed to detect carbon monoxide (CO) gas and alert occupants to its presence. This battery-operated unit features a digital display for real-time CO level readings and provides continuous protection, even during power outages. This manual provides instructions for proper installation, operation, and maintenance to ensure optimal performance and safety.

2. Información importante de seguridad

Carbon monoxide (CO) is an invisible, odorless, and tasteless gas that can be fatal. It is produced when fuels burn incompletely. Sources can include furnaces, water heaters, fireplaces, gas stoves, and vehicle exhaust. Proper placement and regular testing of your CO alarm are crucial for your safety.

  • Nunca ignore una alarma de CO. Act immediately if the alarm sounds.
  • Know the symptoms of CO poisoning: headache, dizziness, nausea, vomiting, confusion, and flu-like symptoms.
  • Asegúrese de que haya una ventilación adecuada for fuel-burning appliances.
  • No pinte la alarma. Paint can clog the openings and interfere with the sensor.
Diagram illustrating potential carbon monoxide sources in a home, including a garage, basement, kitchen, living room, and chimney.
Figure 1: Potential Carbon Monoxide Sources in Your Home. This diagram highlights common areas where carbon monoxide can originate, such as unvented space heaters in bedrooms, clogged chimneys, faulty furnaces in basements, and vehicle exhaust in garages.
Diagram showing recommended placement of smoke and carbon monoxide alarms throughout a multi-story house, including bedrooms, hallways, and near fuel-burning appliances.
Figure 2: Recommended Alarm Placement. This illustration provides guidance on where to install carbon monoxide alarms, smoke alarms, and fire extinguishers on each level of a home, including bedrooms, basements, and near kitchens.

Video 1: Fire Preparedness Tips. This video from Amazon Tools & Home Improvement offers general fire preparedness advice, including the importance of smoke and carbon monoxide alarms, and where to place fire extinguishers. While not specific to this model, it provides valuable context for home safety.

3. Contenido del paquete

  • Kidde Nighthawk Carbon Monoxide Alarm (Model KN-COPP-B-LP)
  • 3 pilas AA
  • Hardware de montaje (tornillos y anclajes de pared)
  • Manual de instrucciones

4. Características

  • Pantalla digital: Shows the level of carbon monoxide detected in parts per million (PPM). The reading updates every 15 seconds.
  • Funciona con pilas: Provides continuous protection even during power outages. Requires 3 AA batteries (included).
  • Botón de prueba/reinicio: Allows for easy testing of the alarm's circuit operation and silencing of the alarm.
  • End of Life Alarm: Alerts the user when the unit needs to be replaced, typically after 10 years of operation.
  • Certificado UL: Meets UL 2034 requirements for carbon monoxide alarms.

5. Instalación y configuración

Follow these steps for proper installation of your Kidde Nighthawk Carbon Monoxide Alarm:

  1. Instalación de la batería: Open the battery compartment on the back of the unit. Insert the 3 AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
  2. Ubicación de montaje: Choose a location where the alarm can be heard by all sleeping areas. Carbon monoxide mixes well with air, so the alarm can be mounted at eye level for easy reading or placed on a tabletop. Avoid placing it directly above or next to fuel-burning appliances, in direct sunlight, or in areas with high humidity.
  3. Montaje en pared: Use the provided mounting plate and screws to secure the alarm to a wall. Drill pilot holes if necessary, insert wall anchors, and then screw the mounting plate into place. Attach the alarm to the mounting plate.
  4. Prueba inicial: After installation, press the 'Test/Reset' button to ensure the alarm is functioning correctly. The alarm should sound, and the digital display will show '888' or a similar test pattern.
A white Kidde Nighthawk carbon monoxide alarm mounted on a light-colored wall, with a digital display showing '0'. In the background, a person is holding a baby, suggesting a home environment.
Figure 3: Installed Carbon Monoxide Alarm. This image shows the Kidde Nighthawk alarm mounted on a wall, indicating a typical installation scenario in a home.

6. Instrucciones de funcionamiento

The Kidde Nighthawk Carbon Monoxide Alarm is designed for simple operation:

  • Funcionamiento normal: During normal operation, the digital display will show '0' indicating no detectable carbon monoxide. A red dot may appear in the lower right corner to confirm normal function.
  • Probando la alarma: Press and hold the 'Test/Reset' button for a few seconds. The alarm will sound a loud, pulsating tone, and the digital display will show '888' or a similar test pattern. Release the button to stop the test. Test the alarm weekly.
  • Alarma de monóxido de carbono: If carbon monoxide is detected, the alarm will sound with four quick beeps followed by five seconds of silence, repeating. The digital display will show the detected CO concentration in PPM.
  • Advertencia de batería baja: The unit will chirp once per minute and display 'Lb' on the screen when the batteries are low. Replace batteries immediately.
  • Peak Level Memory: The alarm stores the highest CO level detected. To view the peak level, press the 'Peak Level' button.

7. Mantenimiento

Regular maintenance ensures your CO alarm functions correctly:

  • Reemplazo de batería: Replace the 3 AA batteries at least once a year, or immediately when the low battery warning sounds.
  • Limpieza: Clean the alarm regularly to prevent dust and debris from accumulating. Use a soft, damp Paño para limpiar el exterior. No utilice aerosoles ni disolventes de limpieza.
  • Pruebas: Test the alarm weekly by pressing the 'Test/Reset' button.
  • Fin de la vida: The alarm has a lifespan of approximately 10 years. When the 'End of Life' alarm sounds, replace the unit immediately.

8. Solución de problemas

ProblemaPosible causaSolución
Alarm sounds continuously with 4 beeps and CO level displayed.Carbon Monoxide detected.Immediately move to fresh air. Call 911 or your local emergency services. Do not re-enter the premises until it has been deemed safe by emergency responders.
Alarm chirps once per minute, 'Lb' displayed.Batería baja.Reemplace las 3 baterías AA inmediatamente.
Alarm chirps every 30 seconds, 'End' displayed.Fin de la vida útil de la unidad.Replace the entire CO alarm unit. The sensor has reached the end of its operational life.
Alarm does not respond to 'Test/Reset' button.No hay energía o hay mal funcionamiento de la unidad.Check battery installation. If batteries are new and correctly installed, and the unit still doesn't respond, replace the unit.

9. Especificaciones

  • Número de modelo: KN-COPP-B-LP
  • Fuente de energía: 3 pilas AA (incluidas)
  • Tipo de sensor: Electroquímico
  • Humedad de funcionamiento: 5% a 95% de humedad relativa, sin condensación
  • Peso del artículo: 10.5 onzas
  • Dimensiones del producto: 2 x 8 x 11 pulgadas
  • Certificaciones: UL 2034

10. Garantía y soporte

This Kidde Nighthawk Carbon Monoxide Alarm comes with a Garantía limitada de siete años. For warranty claims or technical support, please refer to the contact information provided in the original product packaging or visit the official Kidde webSitio. Conserve su recibo de compra como comprobante de compra para fines de garantía.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.