Eheim Biopower 160 Interior Filter Instruction Manual

1. Producto terminadoview

The Eheim Biopower 160 is an internal filter designed for aquariums ranging from 80 to 160 liters. It features a multi-layer filtration system, similar to an external filter, to ensure optimal water quality. The filter includes a pre-filter cartridge and Substrate Pro media for biological filtration. Its all-round rotatable pump head allows for flexible water flow direction, and the flow rate is adjustable from 180 to 550 liters per hour.

• Multi-layer Filtration: Provides comprehensive mechanical, biological, and chemical filtration.
• Tasa de flujo ajustable: Customize water circulation to suit your aquarium's needs.
• Rotatable Pump Head: Direct water flow precisely where it is needed.
• Fácil mantenimiento: Designed for convenient cleaning and media replacement.

Image 1.1: The Eheim Biopower 160 Interior Filter. This image displays the compact design of the filter, highlighting its various components including the filter baskets and the adjustable outlet.

2. Instrucciones de seguridad

Lea y siga atentamente estas instrucciones de seguridad para evitar lesiones o daños al producto.

• Always disconnect all electrical appliances in the aquarium from the mains before performing any maintenance or cleaning.
• Ensure the filter is fully submerged in water during operation. Running dry can damage the motor.
• No opere el filtro si el cable de alimentación o el enchufe están dañados.
• Este aparato es solo para uso en interiores y está destinado a acuarios.
• Mantener fuera del alcance de los niños.
• Do not attempt to repair the filter yourself. Contact qualified personnel for service.

3. Contenido del paquete

Verifique que todos los componentes estén presentes en el paquete:

• Eheim Biopower 160 Filter Unit
• Pre-filter cartridge
• Filter baskets with Substrate Pro media
• Ventosas para montaje
• Spray bar and outlet nozzle
• Manual de instrucciones

4. Configuración e instalación

Follow these steps to set up your Eheim Biopower 160 filter:

1. Desempaquetar componentes: Retire con cuidado todas las piezas del embalaje y compárelas con la lista de contenido del paquete.
2. Ensamblar el medio filtrante: Ensure the filter media (pre-filter, Substrate Pro) are correctly placed within their respective baskets. The water flows from bottom to top through the filter layers.
3. Coloque ventosas: Securely attach the suction cups to the filter housing.
4. Posición en el Acuario: Place the filter inside the aquarium, ensuring it is fully submerged. The filter should be positioned vertically, preferably in a corner or along the back wall, to allow for optimal water circulation.
5. Attach Outlet: Connect the desired outlet (e.g., spray bar or nozzle) to the pump head. Adjust the direction of the outlet as needed.
6. Conectarse a la energía: Once the filter is correctly positioned and fully submerged, plug the power cord into a suitable electrical outlet.

5. Instrucciones de funcionamiento

Once installed, the Eheim Biopower 160 is ready for operation.

• Iniciando el filtro: After plugging in, the filter will start automatically. Ensure water is flowing from the outlet.
• Ajuste del caudal: The flow rate can be adjusted using the control knob located on the pump head. Turn the knob to increase or decrease the water flow according to your aquarium's requirements and inhabitants.
• Directing Water Flow: The pump head is rotatable 360 degrees. Adjust its position to create optimal water movement and surface agitation for gas exchange.

6. Mantenimiento

Regular maintenance is crucial for the efficient operation and longevity of your filter.

1. Desconectar la energía: Always unplug the filter from the mains before performing any maintenance.
2. Remove Filter from Aquarium: Gently detach the filter from the aquarium wall. The mounting bracket with suction cups can remain on the glass, allowing the filter unit to be easily removed for cleaning.
3. Disassemble Filter: Separate the pump head from the filter baskets. Open the filter baskets to access the media.
4. Clean Pre-filter: The pre-filter cartridge should be rinsed regularly (weekly or bi-weekly, depending on aquarium load) under aquarium water or dechlorinated tap water. Avoid cleaning with harsh chemicals.
5. Medios filtrantes limpios: The biological filter media (Substrate Pro) should be cleaned less frequently (every 1-3 months) to preserve beneficial bacteria. Rinse gently in old aquarium water to remove debris without destroying the bacterial colony. Replace media as recommended by the manufacturer, typically every 6-12 months.
6. Impulsor limpio: Periodically inspect and clean the impeller and impeller shaft for any debris or blockages. This helps maintain optimal flow and prevents noise.
7. Reensamblar y reinstalar: After cleaning, reassemble the filter components in the correct order and reinstall it in the aquarium. Ensure all connections are secure before plugging it back in.

7. Solución de problemas

If you encounter issues with your Eheim Biopower 160, refer to the following table:

8. Especificaciones

Key technical specifications for the Eheim Biopower 160 filter:

• Número de modelo: 2411020
• Tamaño del acuario: 80 - 160 litros
• Flujo de agua ajustable: 180 - 550 L/H
• Consumo de energía: 6 vatios
• Volumen de filtración: 380 cm³
• Maximum Water Rise: 0.43 metros
• Dimensiones del producto: Aproximadamente 4.17 x 4.72 x 9.84 pulgadas (10.6 x 12 x 25 cm)
• Peso del artículo: 1.54 libras (700 gramos)
• Material: Polipropileno

9. Garantía y soporte

Eheim products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official Eheim website. For technical support, spare parts, or service inquiries, please contact Eheim customer service or your local authorized dealer.

Guarde su comprobante de compra para reclamos de garantía.