Renkforce 751560 Dual Motion Sensor Instruction Manual

1. Producto terminadoview

The Renkforce 751560 Dual Motion Sensor is a passive infrared (PIR) detector designed for reliable motion detection in various environments. It features a dual sensor for enhanced accuracy and reduced false alarms, making it suitable for security and surveillance applications in private, commercial, and industrial settings. The sensor offers selectable Normally Open (NO) and Normally Closed (NC) operation, allowing integration with different alarm systems or for controlling lighting, such as staircase lights. It also includes an anti-tamper mechanism for added security.

Figura 1: Frente view of the Renkforce 751560 Dual Motion Sensor. This image shows the white rectangular housing with the curved detection lens at the top and the Renkforce logo at the bottom.

2. Instrucciones de seguridad

• Lea este manual detenidamente antes de la instalación y operación.
• Sólo personal calificado debe realizar la instalación y el cableado.
• Asegúrese de que la fuente de alimentación esté desconectada antes de cualquier trabajo de instalación o mantenimiento.
• No exponga el dispositivo a temperaturas extremas, humedad o luz solar directa.
• Avoid mounting the sensor near heat sources or objects that may cause rapid temperature changes, as this can lead to false alarms.
• Do not paint or cover the sensor lens, as this will impair its functionality.
• Este dispositivo está diseñado únicamente para uso en interiores.

3. Configuración e instalación

3.1. Contenido del paquete

• Renkforce 751560 Motion Detector
• Material de montaje (tornillos, tacos)
• Manual de usuario

3.2. Ubicación de montaje

Choose a suitable location for the motion sensor, typically in a corner or on a wall, where it can cover the desired detection area without obstruction. Avoid aiming the sensor directly at windows, heating vents, or areas with significant air currents.

Figura 2: Lado view of the sensor showing the detachable wall mounting bracket. This bracket allows for easy installation and adjustment.

3.3. Pasos de instalación

1. Prepare la superficie de montaje: Mark the drilling points for the mounting bracket on the wall.
2. Perforar agujeros: Drill holes at the marked positions and insert the wall plugs (if necessary).
3. Coloque el soporte de montaje: Fije el soporte de montaje a la pared utilizando los tornillos proporcionados.
4. Conectar el cableado: Open the sensor housing carefully. Connect the power supply (12V DC) and alarm output wires to the designated terminals inside the sensor. Ensure correct polarity.
5. Set NO/NC Mode: Configure the sensor's output mode (Normally Open or Normally Closed) according to your alarm system's requirements using the internal jumper or switch.
6. Attach Sensor to Bracket: Mount the sensor unit onto the attached bracket. Ensure it clicks securely into place.
7. Ajustar el ángulo de detección: Adjust the sensor's angle to cover the desired detection area.

Figura 3: Detallado view of the mounting bracket, showing the screw holes and the swivel mechanism for angle adjustment.

4. Instrucciones de funcionamiento

4.1. Encendido

Once installed and wired, apply 12V DC power to the sensor. The sensor will typically undergo a brief initialization period (e.g., 30-60 seconds) during which its LED indicator may flash. Avoid movement in the detection area during this time.

4.2. Detection and Alarm Output

The dual PIR sensor detects infrared radiation changes caused by moving objects within its 12-meter range. Upon detection, the sensor's alarm output will change state (either open or closed, depending on your NO/NC setting) to trigger the connected alarm system or device.

4.3. Anti-Tamper función

The sensor is equipped with an anti-tamper switch. If the sensor's housing is opened or forcibly removed from its mounting bracket while powered, this switch will activate, triggering a separate tamper alarm output to your connected system.

5. Mantenimiento

• Limpieza: Periodically wipe the sensor lens and housing with a soft, dry cloth to remove dust and dirt. Do not use abrasive cleaners or solvents.
• Pruebas: Regularly test the sensor's functionality by walking through its detection area to ensure it triggers the connected alarm system.
• Inspección: Visually inspect the wiring and mounting for any signs of damage or loosening.

6. Solución de problemas

7. Especificaciones técnicas

Figura 4: Frente view of the sensor with approximate dimensions: 15cm height, 9cm width, and 5cm depth.

8. Información de garantía

According to the product specifications, there is no warranty specified for this product. Please refer to your point of purchase for any return or defect policies.

EU spare parts availability is stated as 1 year.

9. Soporte y contacto

For technical support or further inquiries, please contact your retailer or the Renkforce customer service department. Refer to the contact information provided with your purchase documentation.

You can also visit the official Renkforce store for more information: Renkforce Store