SAMSON Auro D208

Samson Auro D208 8-Inch Active Loudspeaker

Manual de instrucciones

Introducción

This manual provides essential information for the proper setup, operation, and maintenance of your Samson Auro D208 8-Inch Active Loudspeaker. Please read these instructions thoroughly before using the product to ensure optimal performance and safety.

Información de seguridad

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, or injury. Keep the loudspeaker away from water and moisture. Do not block ventilation openings. Refer all servicing to qualified personnel.

Contenido del paquete

Verifique que su paquete contenga los siguientes elementos:

  • Samson Auro D208 8-Inch Active Loudspeaker
  • Cable de alimentación
  • Manual de usuario

Configuración

Colocación

The Auro D208 is designed for versatile placement. It can be used as a main PA speaker, a floor monitor, or mounted on a standard 1 3/8-inch (35mm) pole. Ensure the speaker is placed on a stable, level surface or securely mounted to prevent tipping.

Samson Auro D208 8-Inch Active Loudspeaker, front view

Frente view of the Samson Auro D208 Active Loudspeaker, showcasing su diseño compacto y rejilla protectora.

Conexiones

The Auro D208 features a Mic/Line input and an additional Line output for linking multiple speakers.

  1. Conexión de energía: Connect the supplied power cable to the AC inlet on the rear panel and then to a suitable power outlet.
  2. Conexión de entrada: Use an XLR or 1/4-inch cable to connect your microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line input.
  3. Linking Speakers: To connect additional Auro D208 speakers, use an XLR cable from the Line output of the first speaker to the input of the next speaker.
Rear panel of Samson Auro D208 showing inputs, outputs, and controls

Rear panel of the Samson Auro D208, illustrating the Mic/Line input, Line output, volume control, and Clip LED.

Instrucciones de funcionamiento

Encendido/apagado

After all connections are made, turn on the power switch located on the rear panel. It is recommended to turn on the Auro D208 last in your audio chain and turn it off first.

Control de volumen

Adjust the main Volume control knob on the rear panel to set the overall output level of the loudspeaker. Start with the volume at its minimum setting and gradually increase it to the desired level.

Indicador LED de clip

The Clip LED illuminates when the input signal is too strong, indicating potential distortion. If the Clip LED lights up frequently, reduce the input level from your source or the volume on the Auro D208 to prevent signal clipping.

Mantenimiento

Limpieza

Clean the exterior of the loudspeaker with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure the speaker is unplugged before cleaning.

Almacenamiento

When not in use, store the loudspeaker in a dry, cool environment, away from direct sunlight and extreme temperatures. If storing for extended periods, consider covering it to protect against dust.

Solución de problemas

ProblemaPosible causaSolución
Sin sonidoNo power; input cable disconnected; volume too low.Check power connection and switch; ensure input cables are secure; increase volume.
Sonido distorsionadoInput signal too high (clipping); faulty cable.Reduce input level from source or speaker volume; replace cable.
Zumbido o zumbidoBucle de tierra; cable defectuoso; interferencia.Ensure all equipment is on the same electrical circuit; try different cables; move away from power sources.

Presupuesto

CaracterísticaDetalle
MarcaSANSÓN
Nombre del modeloAuro D208
Número de modeloSAROD208A
Tipo de altavoz2-Way Active Loudspeaker
Tamaño del altavoz8 pulgadas
Diámetro del woofer8 pulgadas
Diámetro del tweeter1 pulgadas
Potencia máxima de salida200 vatios
Tecnología de conectividadUSB (for control, not audio streaming)
Modo de salida de audioEstéreo
Tipo de montajeClip On, Floor Mount, 1 3/8-inch (35mm) Pole Mount Receptacle
Características adicionalesMic/Line input with Volume control and Clip LED, Additional Line output for linking multiple speakers
Dimensiones del artículo (Pr. x An. x Al.)17" de profundidad x 12.25" de ancho x 10.25" de alto
Peso del artículo7.75 gramos
Fuente de poderEléctrico con cable

Garantía y soporte

Información de garantía

This product is covered by a 1-year parts and labor limited warranty. Please retain your proof of purchase for warranty claims.

Atención al cliente

For technical assistance, service, or warranty inquiries, please visit the official Samson websitio o contacte con su departamento de atención al cliente. La información de contacto normalmente se encuentra en la página web del fabricante. websitio o en el embalaje del producto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.