Sunlite TL-L200
Sunlite TL-L200 Griplite Tail Light
Manual de instrucciones
Introducción
Thank you for choosing the Sunlite TL-L200 Griplite Tail Light. This manual provides essential information for the proper installation, operation, and maintenance of your new tail light. Designed for enhanced visibility and safety, this light features bright LEDs and a durable, water-resistant silicone body. Please read this manual thoroughly before use and retain it for future reference.
Información de seguridad
- Asegúrese siempre que la luz trasera esté montada de forma segura antes de conducir.
- Do not look directly into the LED light as it may cause temporary vision impairment.
- While the light is water-resistant, avoid prolonged submersion.
- Regularly check battery life to ensure consistent performance.
- This light is intended to increase visibility to others; it does not replace the need for safe riding practices.
Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- 1 x Sunlite TL-L200 Griplite Tail Light
- 2 x CR2032 Lithium Batteries (pre-installed)
Configuración
Battery Installation (If not pre-installed or for replacement)
- Gently open the silicone casing para acceder al compartimento de la batería.
- Insert two CR2032 lithium batteries, ensuring correct polarity (+/-).
- Close the silicone casing securely to maintain water resistance.
Montaje de la luz trasera
The Sunlite Griplite Tail Light features an integrated silicone mounting strap for versatile attachment.
- Identify a suitable mounting location on your bicycle, such as the seat post, seat stay, or rear rack. Ensure the light will be visible from the rear.
- Wrap the integrated silicone strap around the desired mounting point.
- Hook the end of the strap onto the designated tab on the light's body, pulling it taut to secure the light firmly in place.
- Adjust the light's angle to ensure optimal visibility.

Image: The Sunlite TL-L200 Griplite Tail Light securely mounted on a bicycle seat post, demonstrating its flexible silicone strap attachment.
Instrucciones de funcionamiento
The Sunlite TL-L200 Griplite Tail Light operates with a simple one-button control located on the top of the light.

Imagen: Frente view of the Sunlite TL-L200 Griplite Tail Light, highlighting the prominent power button on its top surface.
- Encendido/apagado: Press the button once to turn the light on. Press and hold the button for approximately 2 seconds to turn the light off.
- Modos de cambio: With the light on, press the button repeatedly to cycle through the available lighting modes:
- Modo estable: Provides a continuous beam of red light for constant visibility.
- Modo intermitente: Emits a pulsating red light, designed to attract attention and enhance safety.

Image: The Sunlite TL-L200 Griplite Tail Light illuminated in a dark environment, demonstrating its bright red light output and visibility.
Mantenimiento
Limpieza
To clean your tail light, wipe the silicone body and lens with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material or lens.
Reemplazo de batería
When the light appears dim or stops functioning, it's time to replace the batteries. Refer to the "Battery Installation" section under "Setup" for detailed instructions. Always use two new CR2032 lithium batteries for optimal performance.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | Baterías agotadas o instalación incorrecta de las baterías. | Reemplace las baterías con nuevas celdas CR2032, asegurándose de la polaridad correcta. |
| La luz es tenue. | Batería baja. | Reemplace las baterías. |
| La luz parpadea. | Conexión de batería suelta o batería baja. | Verifique que el compartimiento de las baterías esté bien ajustado; reemplace las baterías si es necesario. |
| La luz se apaga durante el viaje. | Montaje inadecuado. | Ensure the silicone strap is pulled taut and securely hooked onto the tab. |
Presupuesto
- Modelo: Sunlite TL-L200 Griplite Tail Light (Part Number: 97525)
- Fuente de luz: 2 x Bright Nichia LEDs
- Fuente de energía: 2 x CR2032 Lithium Batteries (included)
- Tiempo de ejecución: Up to 100 hours (depending on mode and battery quality)
- Modos: 1 Steady, 1 Flashing
- Material: Water-resistant Silicone Body
- Tipo de montaje: Integrated Silicone Strap (Seat Mount)
- Peso del artículo: Aproximadamente 0.94 libras
- Dimensiones (LxAnxAl): Aproximadamente 4.7 x 3.25 x 1.45 pulgadas
- Nivel de resistencia al agua: Resistente al agua
- Código postal: 072774975259
Garantía y soporte
Sunlite products are manufactured to high standards. For specific warranty information or technical support, please refer to the product packaging or visit the official Sunlite webSitio. Conserve su recibo de compra como comprobante de compra.
For further assistance, please contact Sunlite customer service through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.