1. Introducción
The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.
Características principales:
- Banda ancha amplificación.
- Incorporates switched-mode power supplies.
- Allows mixing of MATV signals via an independent input.
- Dimensiones compactas: 180 x 110 x 55 mm.
- High-shielding chassis, manufactured from Zamak.
- Separado amplification with very low noise figure, preserving signal quality.
- Ultra-reduced ergonomic design.
Figura 1: Posterior view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.
2. Información de seguridad
Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Fuente de alimentación: Asegúrese de que el dispositivo esté conectado a una toma de corriente con el volumen correcto.tage y frecuencia según lo especificado en las especificaciones técnicas.
- Ventilación: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
- Humedad: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp entornos.
- Limpieza: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
- Servicio: No intente reparar este producto usted mismo. Refiera todo el servicio a personal de servicio calificado.
- Montaje: Ensure the device is securely mounted on a stable surface to prevent it from falling.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- Televes 5363 Multiband Ampmás vivaz
- Power cable (integrated or separate, depending on model variant)
- Manual de instrucciones (este documento)
- Accesorios de montaje (tornillos, tacos)
4. Configuración e instalación
El Televés 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:
4.1. Montaje del Ampmás vivaz
- Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
- Mark the positions for the mounting screws on the wall or surface.
- Si es necesario, taladre agujeros piloto e inserte tacos de pared.
- Asegurar el ampElevador utilizando tornillos apropiados.
4.2. Connecting Signals
El amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.
Figure 2: Detail of the input connections and configuration switches on the Televes 5363 ampmás duradero.
- VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
- Entrada SAT: Connect your satellite dish signal cable to the designated SAT input.
- Producción: Conecte la salida del amplifier to your SMATV distribution network or directly to your television/receiver.
4.3. Conexión de alimentación
Conecte el cable de alimentación a la amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.
Figura 3: Frente view of the Televes 5363 Multiband Amplifier, showing the power input.
5. Operación
El Televés 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.
5.1. Signal Mixing
El amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.
5.2. Ajuste de ganancia
El amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.
6. Mantenimiento
To ensure optimal performance and longevity of your Televes 5363 Multiband Amplifier, siga estas sencillas pautas de mantenimiento:
- Limpieza: Limpie periódicamente el exterior del ampLimpie el dispositivo con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
- Ventilación: Asegúrese de que las ranuras de ventilación estén libres de polvo y obstrucciones para evitar el sobrecalentamiento.
- Conexiones: Revise ocasionalmente todas las conexiones de cables para asegurarse de que estén seguras y libres de corrosión.
- Ambiente: Mantener el amplifier in a dry, cool environment, away from direct sunlight and extreme temperatures.
7. Solución de problemas
If you encounter issues with your Televes 5363 Multiband Amplifier, consulte los siguientes problemas y soluciones comunes:
- Sin señal:
- Check all cable connections to ensure they are properly seated.
- Verificar que el amplifier is receiving power (check power indicator light if available).
- Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
- Weak or Poor Quality Signal:
- Check the quality of the input signals before they reach the ampmás duradero.
- Ensure all connections are tight and free from damage or corrosion.
- Verificar que el amplifier's gain settings (if adjustable) are appropriate for your installation.
- Sin energía:
- Check the power cable connection to both the amplifier and the electrical outlet.
- Pruebe la toma de corriente eléctrica con otro dispositivo para asegurarse de que funcione.
Si el problema persiste después de intentar estas soluciones, comuníquese con soporte técnico calificado.
8. Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Número de modelo | 5363 |
| Fabricante | Televés |
| Material | Zamak |
| Número de entradas | 2 (VHF/UHF, SAT) |
| Output Level (Vs) | 124 dBuV |
| Gain (SAT) | 45 dB |
| Rango de frecuencia | Up to 2150 MHz (FI) |
| Tipo de montaje | Montaje en superficie |
| Dimensiones (L x An x Al) | 180 x 110 x 55 mm |
| Peso del producto | 950 gramos |
| Fuente de alimentación | Switched-mode power supply (internal) |
| Pilas necesarias | No |
9. Garantía y soporte
This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes websitio.
For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes websitio.
