LD Systems LDWSECO2X2R2 Double Receiver User Manual

Introducción

Thank you for choosing the LD Systems LDWSECO2X2R2 Double Receiver. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Instrucciones de seguridad importantes

• Lea estas instrucciones: Todas las instrucciones de seguridad y operación deben leerse antes de operar el producto.
• Keep these instructions: Las instrucciones de seguridad y funcionamiento deben conservarse para futuras consultas.
• Preste atención a todas las advertencias: Se deben respetar todas las advertencias que figuran en el producto y en las instrucciones de uso.
• Sigue todas las instrucciones: Se deben seguir todas las instrucciones de uso y operación.
• No use este aparato cerca del agua: No utilice este producto cerca del agua o la humedad.
• Clean only with dry cloth: Desenchufe este producto del tomacorriente de pared antes de limpiarlo.
• Ventilación: No obstruya las aberturas de ventilación. Instale el producto según las instrucciones del fabricante.
• Fuentes de energía: Operate this product only from the type of power source indicated on the marking label.
• Servicio: No intente reparar este producto usted mismo, ya que abrir o quitar las cubiertas puede exponerlo a volúmenes peligrosos.tagu otros peligros. Solicite cualquier servicio técnico a personal de servicio calificado.

Contenido del paquete

Compruebe que todos los artículos enumerados a continuación estén incluidos en su paquete:

• LD Systems LDWSECO2X2R2 Double Receiver Unit
• Power Adapter (12-18V DC, 300mA)
• Manual de usuario (este documento)
• Antennas (quantity may vary based on model variant)

Producto terminadoview

The LD Systems LDWSECO2X2R2 is a double receiver designed for wireless audio transmission. It operates on frequencies 863.900 MHz and 864.900 MHz, providing reliable signal reception for professional audio applications.

Imagen: Frente view of the LD Systems LDWSECO2X2R2 Double Receiver, showing controls and display.

Controles del panel frontal:

• Botón de encendido: Enciende o apaga la unidad.
• Pantalla de canal: Shows the currently selected channel for each receiver.
• Controles de volumen: Independent volume adjustment for each receiver channel.
• RF/AF Indicators: LEDs indicating RF signal presence and AF audio level.

Conexiones del panel trasero:

• Entradas de antena: Conecte las antenas suministradas.
• Salidas XLR balanceadas: For connecting to professional audio mixers or ampsalvavidas.
• Unbalanced 1/4" Jack Outputs: Alternative audio output connections.
• Entrada de energía DC: Conecte el adaptador de corriente proporcionado.

Guía de configuración

Follow these steps to set up your LD Systems LDWSECO2X2R2 Double Receiver:

1. Desembalaje del receptor: Retire con cuidado todos los componentes del embalaje.
2. Conectar antenas: Screw the supplied antennas onto the antenna inputs located on the rear panel. Ensure they are securely fastened.
3. Coloque el receptor: Place the receiver in a stable location, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure good line-of-sight to the intended transmitter.
4. Conectar salidas de audio:
   • For balanced connections, use XLR cables to connect the receiver's XLR outputs to your mixer or ampmás duradero.
   • For unbalanced connections, use 1/4" jack cables to connect the receiver's 1/4" outputs to your audio equipment.
5. Conecte la electricidad: Connect the provided DC power adapter to the receiver's DC power input. Plug the adapter into a suitable power outlet.
6. Encendido: Press the power button on the front panel to turn on the receiver. The display should illuminate.
7. Pair with Transmitters: Refer to your transmitter's manual for instructions on how to pair it with the receiver. Ensure the transmitter and receiver are set to the same frequency/channel.

Instrucciones de funcionamiento

1. Encendido: Ensure both the receiver and your wireless transmitters are powered on.
2. Comprobar señal: Observe the RF (Radio Frequency) indicator on the receiver. It should illuminate steadily when a signal from the paired transmitter is detected.
3. Ajustar el volumen: Use the independent volume controls on the front panel to set the desired audio output level for each channel. Start with a low volume and gradually increase it to avoid sudden loud sounds.
4. Supervisión de audio: The AF (Audio Frequency) indicator will light up when audio is being received. Ensure your audio equipment (mixer, amplifier) is also properly configured to receive the signal.
5. Selección de canal (si corresponde): If your model supports manual channel selection, refer to the specific instructions for changing frequencies to avoid interference. The LDWSECO2X2R2 operates on fixed frequencies 863.900 MHz and 864.900 MHz.
6. Apagado: When finished, power off your transmitters first, then power off the receiver.

Mantenimiento

• Limpieza: Desconecte la alimentación antes de limpiar. Utilice un paño suave y seco para limpiar el exterior del receptor. No utilice limpiadores líquidos ni aerosoles.
• Almacenamiento: When not in use for extended periods, store the receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
• Antenas: Ensure antennas are not bent or damaged. Replace if necessary to maintain optimal signal reception.
• Adaptador de corriente: Regularly inspect the power adapter and cable for any signs of damage. Do not use a damaged adapter.

Solución de problemas

Presupuesto

Garantía y soporte

LD Systems products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local dealer or the LD Systems customer service department.

Nota: La información sobre la disponibilidad de piezas de repuesto no se proporciona en los detalles del producto.