Introducción
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Zoop Digital Children's Watch, Model NEC3001PV03J. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.
Producto terminadoview
This image shows the Zoop Digital Children's Watch, featuring a grey digital display, a round case, and a black polyester strap with a buckle clasp.
The Zoop Digital Children's Watch is designed for durability and ease of use. It features a clear digital display, a robust case, and a comfortable strap. Key components include the display screen, function buttons (typically MODE, SET, START/STOP, LIGHT), and the watch strap with a buckle clasp.
Configuración
Instalación de la batería
Your Zoop Digital Children's Watch comes with a product-specific battery pre-installed. No initial battery installation is required. If the display is blank or dim, the battery may need replacement (refer to the Maintenance section).
Configuración de la hora y la fecha
- Presione el MODO button repeatedly until the time setting mode is activated. Digits, typically hours or minutes, will begin to flash.
- Utilice el COLOCAR or AJUSTAR button (location varies by model, usually on the side) to change the flashing digits.
- Presione el MODO button again to cycle through hours, minutes, seconds, month, date, and day of the week.
- Adjust each value using the COLOCAR or AJUSTAR botón.
- Una vez que todos los ajustes sean correctos, presione el botón MODO Botón para salir del modo de configuración y volver a la visualización de la hora normal.
Instrucciones de funcionamiento
Visualización de la hora
In normal mode, the watch displays the current time (hours, minutes, seconds) and often the date (month, day, day of the week).
Uso de la función de alarma
Para configurar la alarma:
- Presione el MODO button until the alarm setting screen appears (usually indicated by an alarm icon or 'AL').
- Utilice el COLOCAR or AJUSTAR Botón para configurar la hora de alarma deseada.
- Prensa MODO to move to minutes and adjust them.
- Prensa MODO nuevamente para confirmar y salir.
- To activate/deactivate the alarm, typically press a specific button (e.g., INICIAR/DETENER or AJUSTAR) while in alarm mode. An alarm icon will appear on the display when active.
Uso de la función de temporizador
To use the timer (countdown or stopwatch):
- Presione el MODO button until the timer or stopwatch screen appears (often indicated by 'TR' or 'ST').
- For a stopwatch, press INICIAR/DETENER to begin counting, press again to pause, and press REINICIAR (if available) to clear.
- For a countdown timer, you may need to set the desired time first using COLOCAR or AJUSTAR botones, luego presione INICIAR/DETENER para comenzar la cuenta regresiva.
Usando la luz de fondo
Presione el LUZ button (usually located on the top left or right side of the watch) to illuminate the display for a few seconds in low-light conditions.
Mantenimiento
Limpieza de su reloj
Para limpiar su reloj, límpielo suavemente con un paño suave.amp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or display. While the watch is water-resistant up to 30 meters, it is not designed for prolonged submersion or hot water exposure. Avoid pressing buttons underwater.
Reemplazo de batería
When the display becomes dim or the watch stops functioning, the battery may need replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance. Refer to the Specifications section for battery type.
Almacenamiento
Cuando no utilice el reloj durante períodos prolongados, guárdelo en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
Solución de problemas
- La pantalla del reloj está en blanco o tenue: La batería puede estar baja o agotada. Reemplace la batería.
- La hora es incorrecta: Re-set the time following the instructions in the 'Setting the Time and Date' section. Ensure you are in the correct 12-hour or 24-hour format.
- La alarma no suena: Asegúrese de que la alarma esté activada (verifique el icono de alarma en la pantalla). Verifique que la hora de la alarma esté configurada correctamente.
- Los botones no responden: The watch may require a soft reset. If possible, remove and reinsert the battery (consult a technician). Avoid excessive force on buttons.
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | NEC3001PV03J |
| Tipo de pantalla | Digital |
| Tipo de movimiento | Automático |
| Forma de la caja | Redondo |
| Diámetro de la caja | 38 milímetros |
| Grosor de la caja | 13 milímetros |
| Color de la esfera | Gris |
| Color de banda | Negro |
| Tipo de material de la banda | Poliéster |
| Tipo de cierre | Hebilla |
| Profundidad de resistencia al agua | 30 metros |
| Nivel de resistencia al agua | Resistente al agua |
| Características especiales | Alarm, Timer |
| Tipo de fuente de poder | Funciona con pilas |
| Baterías | 1 batería específica del producto (incluida) |
| Peso del artículo | 70 gramos |
Garantía y soporte
Información de garantía
Your Zoop Digital Children's Watch comes with a 12-month manufacturer warranty covering manufacturing defects. To avail warranty service, present your original purchase invoice at any authorized Titan Service Center. No separate warranty card is required.
Atención al cliente
For further assistance, service-related queries, or to locate an authorized service center, please contact Titan India customer support:
- Número gratuito: 1800-266-0123 (available 10 AM to 7 PM, all days of the week)
- Correo electrónico: atenciónalcliente@titan.co.in