Introducción
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Información de seguridad
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Mecanismo de pestillo
- Strike plate (ASA Strike)
- Tornillos de montaje
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Configuración e instalación
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Preparación de la puerta
Ensure your door is prepared with the following standard dimensions:
- Diámetro transversal: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 pulgadas (25 mm) de diámetro
- Contracorriente: 2-3/4 pulgadas (70 mm)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Asegure el pestillo con los tornillos provistos.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Instalar la placa de impacto
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Fije la placa de impacto con los tornillos provistos.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Instrucciones de funcionamiento
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Nota: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Mantenimiento
El mantenimiento regular garantiza la longevidad y el buen funcionamiento de su cerradura.
- Limpieza: Limpie las superficies exteriores con un paño suave yamp Paño. Evite limpiadores abrasivos o disolventes, que pueden dañar el acabado.
- Lubricación: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Inspección: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La palanca está rígida o es difícil de girar. | Acumulación de suciedad o falta de lubricación. | Clean the mechanism and apply graphite lubricant. |
| El pestillo no se retrae completamente. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| La puerta traquetea al cerrarse. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | 129002 |
| Serie | Serie 2500 |
| Tipo de bloqueo | Cylindrical Passage Lock (Non-locking) |
| Material | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Finalizar | Cromo satinado |
| Estilo de palanca | Withnell |
| Contracorriente | 2-3/4 pulgadas (70 mm) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 pulgadas (25 mm) de diámetro |
| Orientación de la mano | Sin manos |
| Calificación | Grade 2 (Standard Duty Commercial) |
| Placa de impacto | Huelga de ASA |
| Componentes incluidos | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Información de garantía
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Atención al cliente
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Websitio: Visit the official Hager webSitio para recursos de soporte e información de contacto.
- Contacto: Refer to the packaging or Hager's webSitio para números de teléfono o direcciones de correo electrónico.
When contacting support, please have your model number (129002) and purchase details available.