1. Introducción
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.
2. Información de seguridad
Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.
- Ensure the motorcycle is stable and on a level surface before starting installation.
- Utilice equipo de protección personal adecuado, como guantes y protección para los ojos.
- Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
- Inspeccione periódicamente el parabrisas y los accesorios de montaje para detectar signos de desgaste, daños o holgura.
- Si no está seguro de algún paso del proceso de instalación, consulte con un mecánico de motocicletas calificado.
3. Contenido del paquete
Verifique que todos los componentes estén presentes y sin daños antes de proceder con la instalación. Si alguna pieza falta o está dañada, contacte con su distribuidor.
- 1x Puig 6789W Traffic Windscreen (Transparent)
- 1x Mounting Hardware Kit (brackets, bolts, washers, nuts)
- 1x Manual de instrucciones (este documento)
Figure 1: The Puig 6789W Traffic Windscreen and its components.
4. Configuración e instalación
This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).
4.1. Herramientas necesarias
- Juego de llaves hexagonales
- Juego de llaves
- Screwdriver (Phillips or flathead, as required)
- Paño suave para limpieza
4.2. Pasos de instalación
- Prepare la motocicleta: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
- Identificar los puntos de montaje: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
- Ensamblar los soportes: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
- Adjuntar a la motocicleta: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
- Ajustar posición: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
- Ajuste final: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.
5. Operando
Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.
6. Mantenimiento
Proper maintenance will extend the life and clarity of your windscreen.
- Limpieza: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
- Inspección: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
- Almacenamiento: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.
7. Solución de problemas
Esta sección aborda problemas comunes que podrías encontrar.
| Problema | Posible causa | Solución |
|---|---|---|
| Windscreen vibrates excessively | Pernos de montaje flojos; instalación incorrecta. | Check and tighten all mounting bolts. Re-evaluate installation steps. |
| Reduced visibility through windscreen | Dirt, scratches, or improper cleaning. | Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement. |
| Windscreen feels loose after riding | Los sujetadores se han aflojado debido a la vibración. | Regularly inspect and tighten all mounting hardware. |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | 6789 W |
| Marca | Puig |
| Compatibilidad | Honda Wave (2012-2013) |
| Color | Transparent / Klar |
| Material | Plástico |
| Tipo de instalación | Vehicle-specific fit, Self-adhesive |
| Dimensiones del paquete | 36 x 31 x 16 cm |
| Peso del artículo | 500 gramos |
9. Garantía y soporte
Los productos Puig se fabrican con altos estándares de calidad. Para obtener información sobre la cobertura de la garantía, reclamaciones o asistencia técnica, consulte el sitio web oficial de Puig. website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.
Fabricante: Puig
Websitio: www.puig.tv