Introducción
The Mr. Beams MB302 Wireless LED Mini Spotlight is designed to provide bright, motion-activated lighting for various indoor and outdoor applications. This product features a motion sensor for automatic activation and a photocell to ensure operation only after dark, optimizing battery life. Its wireless design allows for easy installation without the need for electrical wiring.
Producto terminadoview
Características principales:
- Brillo: 80 lumens of bright LED light.
- Detección de movimiento: Detects motion from up to 30 feet away.
- Apagado automático: Light remains on for 30 seconds per activation.
- Sensor de fotocélula: Activates only after dark to conserve battery life.
- Diseño resistente a la intemperie: Adecuado para el uso de interior y al aire libre.
- Instalación inalámbrica: No wiring required, mounts in minutes.
- Cabeza ajustable: Point the spotlight in any desired direction.
- Cobertura: Provides approximately 350 square feet of light coverage.
- Fuente de energía: Battery operated (requires 3 C-cell batteries per unit, not included).
¿Qué hay en la caja?
- Mr. Beams MB302 Wireless LED Mini Spotlight Unit(s)
- Herrajes de montaje
Note: C-cell batteries are not included and must be purchased separately.
Información de seguridad
- No mezcle pilas viejas y nuevas.
- No mezcle pilas alcalinas, estándar (carbono-zinc) o recargables (níquel-cadmio).
- Inserte siempre las pilas correctamente, respetando la polaridad (+ y -).
- Retire las baterías agotadas de inmediato.
- Deseche las baterías adecuadamente de acuerdo con las regulaciones locales.
- No mire directamente a la luz LED.
- Ensure the mounting surface is stable and can support the weight of the spotlight.
Configuración
1. Instalación de la batería
- Twist the front cover of the spotlight counter-clockwise to remove it.
- Insert 3 new C-cell batteries into the battery compartment, ensuring correct polarity (+/-).
- Replace the front cover by aligning the tabs and twisting clockwise until secure.
2. Mounting the Spotlight
The Mr. Beams MB302 can be mounted to any flat surface using the provided hardware. Choose a location where motion detection is desired and where the light can illuminate the target area effectively.
- Seleccione una ubicación de montaje adecuada.
- Utilice el soporte de montaje como plantilla para marcar los orificios de los tornillos.
- Taladre agujeros guía si es necesario.
- Fije el soporte de montaje a la superficie utilizando los tornillos.
- Attach the spotlight unit to the mounting bracket.
- Adjust the spotlight head to direct the light beam as needed.
Instrucciones de funcionamiento
The Mr. Beams MB302 Mini Spotlight operates automatically based on motion and light levels.
- Activación automática: The built-in motion sensor detects movement within its 30-foot range.
- Sensor de luz: The integrated photocell ensures the spotlight only activates when it is dark enough, preventing unnecessary activation during daylight hours and conserving battery power.
- Duración: Once activated, the light will remain on for 30 seconds. If motion is continuously detected, the light will stay on until motion ceases for 30 seconds.
Mantenimiento
- Reemplazo de batería: When the light output diminishes or the unit stops activating, it is time to replace the batteries. Follow the battery installation steps in the Setup section.
- Limpieza: Periodically wipe the lens and motion sensor with a soft, damp Paño para garantizar un rendimiento óptimo. No utilice limpiadores abrasivos ni disolventes.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | 1. Oscuridad insuficiente. 2. Dead or incorrectly installed batteries. 3. Motion sensor obstructed. | 1. Pruebe en un entorno más oscuro. 2. Reemplace las baterías, asegurándose de la polaridad correcta. 3. Clear any obstructions from the sensor's view. |
| Light stays on constantly or triggers repeatedly. | 1. Continuous motion in sensor range. 2. Sensor sensitivity too high (if adjustable, though this model is fixed). 3. Environmental factors (e.g., heat sources, strong winds moving objects). | 1. Ensure no constant motion is within the detection zone. 2. Reposition the spotlight to avoid areas with constant activity or environmental disturbances. 3. Check for heat sources or moving objects (e.g., tree branches) that might be triggering the sensor. |
| La luz es tenue. | Batería baja. | Replace all batteries with new C-cell batteries. |
Presupuesto
- Marca: señor vigas
- Número de modelo: MB302
- Color: Blanco
- Fuente de energía: Funciona con pilas
- Peso del artículo: 0.26 Kilograms (per unit)
- Rango de detección de movimiento: Hasta 30 pies
- Tipo de montaje: Montaje en pared
- Tipo de batería: C-cell
- Número de baterías: 3 C-cell batteries per unit (6 for a pack of 2)
- Salida de luz: 80 lúmenes
- Cobertura de luz: 350 pies cuadrados
Garantía
This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.
Apoyo
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Mr. Beams websitio.