Raymond Weil 2785-BKR-20000

Raymond Weil Freelancer Automatic Watch 2785-BKR-20000 User Manual

Model: 2785-BKR-20000

1. Introducción

This manual provides essential information for the proper use, care, and maintenance of your Raymond Weil Freelancer Automatic Watch, model 2785-BKR-20000. This timepiece features a black PVD stainless steel case, a black rubber strap, and a black skeleton dial with luminous silver-tone hands. It is powered by a Raymond Weil calibre RW1212 automatic movement, offering a power reserve of approximately 38 hours. The watch is equipped with a scratch-resistant sapphire crystal and a screw-down crown, ensuring water resistance up to 100 meters (330 feet).

Please read these instructions carefully to ensure optimal performance and longevity of your watch.

2. Características del producto

  • Marcar: Black skeleton dial with luminous silver-tone hands and Arabic numeral minute markers.
  • Movimiento: Raymond Weil Calibre RW1212 Automatic, 27 Jewels, 28,800 vph, 38-hour power reserve.
  • Caso: 42 mm black PVD stainless steel case with a fixed black PVD bezel and transparent case back.
  • Cristal: Cristal de zafiro resistente a arañazos.
  • Correa: Black rubber strap with a fold-over clasp.
  • Resistencia al agua: 100 metros (330 pies).
  • Funciones: Hour, Minute.

3. Configuración

3.1 Desembalaje

Carefully remove your watch from its packaging. Inspect the watch for any visible damage. The watch is typically secured in a protective box.

Raymond Weil watch box, open to reveal a watch cushion inside.

Image: The watch is presented in a protective box, ensuring its safety during transport and storage.

3.2 Bobinado inicial

Your Raymond Weil Freelancer watch is equipped with an automatic movement. Before wearing it for the first time, or if it has stopped due to lack of activity, it requires manual winding to build up its power reserve.

  1. Unscrew the crown by turning it counter-clockwise until it springs free from the case.
  2. Turn the crown clockwise approximately 30-40 times. This will provide sufficient power for the watch to start running.
  3. Once wound, proceed to set the time.

3.3 Configuración de la hora

  1. Ensure the crown is unscrewed (position 1, as described in 3.2).
  2. Gently pull the crown out to position 2. The watch hands will stop.
  3. Gire la corona en el sentido de las agujas del reloj o en el sentido contrario para ajustar las manecillas de las horas y los minutos a la hora deseada.
  4. Una vez ajustada la hora, vuelva a colocar la corona en la posición 1.
  5. Screw the crown back in tightly by turning it clockwise until it is fully secured against the case. This is crucial for maintaining water resistance.

4. Funcionamiento del reloj

4.1 Llevando el reloj

Wear your watch regularly to keep the automatic movement powered. The natural motion of your wrist will wind the watch. If the watch is not worn for an extended period (more than 38 hours), it will stop and require manual winding as described in Section 3.2.

Raymond Weil Freelancer watch on a person's wrist, showcasing the dial and strap.

Image: The Raymond Weil Freelancer watch comfortably worn on a wrist, demonstrating its fit and appearance.

4.2 Resistencia al agua

Your watch is water resistant to 100 meters (330 feet). This means it is suitable for swimming and snorkeling, but not for diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown or pushers (if present) while the watch is wet or submerged, as this can compromise the water resistance.

  • 100m (330ft): Adecuado para nadar y hacer snorkel.
  • Not suitable for scuba diving or high-impact water sports.
  • Evite exponer el reloj a cambios extremos de temperatura (por ejemplo, ducha caliente seguida inmediatamente de agua fría).

5. Mantenimiento

5.1 Limpieza de su reloj

To maintain the appearance of your watch, clean it regularly. For the case and sapphire crystal, use a soft, damp cloth. For the rubber strap, a mild soap solution and water can be used, followed by rinsing with clean water and drying thoroughly. Avoid using harsh chemicals or abrasive materials.

5.2 Cuidado de la correa

The black rubber strap is durable but can be affected by prolonged exposure to direct sunlight, extreme temperatures, and certain chemicals. Clean it regularly to remove sweat and dirt, which can degrade the material over time.

Close-up of the watch's stainless steel case back and fold-over clasp on the rubber strap.

Imagen: Detallada view of the watch's case back, showing engravings and the secure fold-over clasp mechanism.

5.3 Intervalos de servicio

Like any precision instrument, your Raymond Weil watch requires periodic servicing to ensure its accuracy and longevity. It is recommended to have your watch serviced by an authorized Raymond Weil service center every 3-5 years. This service typically includes cleaning, lubrication, and adjustment of the movement, as well as replacement of seals to maintain water resistance.

6. Solución de problemas

6.1 El reloj no funciona

  • Reserva de energía insuficiente: If the watch has stopped, manually wind it by turning the crown clockwise 30-40 times after unscrewing it. Wear the watch regularly to keep it wound.
  • Crown Not Screwed In: Ensure the crown is fully screwed down. If it's pulled out, the movement may be disengaged.

6.2 Inexactitud horaria

  • Reserva de energía baja: An automatic watch may lose accuracy if its power reserve is low. Ensure it is sufficiently wound.
  • Campos magnéticos: Exposure to strong magnetic fields (e.g., from speakers, refrigerators, or certain electronic devices) can affect the watch's accuracy. If you suspect magnetization, consult an authorized service center for demagnetization.
  • Impacto: A severe shock or impact can affect the movement. If accuracy issues persist after ensuring sufficient winding and checking for magnetic interference, professional inspection is recommended.

6.3 Water Condensation Inside Crystal

If you notice condensation under the sapphire crystal, it indicates that moisture has entered the watch. This requires immediate attention from an authorized service center to prevent damage to the movement. Do not attempt to dry the watch yourself.

7. Especificaciones

Característica Detalle
MarcaRaymond Weil
Nombre del modelo2785-BKR-20000
Número de modelo del artículo5591-STP-00308
Nombre genéricoReloj automático
Tipo de movimientoAutomatic (Raymond Weil Calibre RW1212)
Tipo de pantallaCosa análoga
Color de la esferaBlack Skeleton
Material de la cajaBlack PVD Stainless Steel
Diámetro de la caja42 milímetros
Grosor de la caja10.6 milímetros
Forma de la cajaRedondo
Material de cristalCristal de zafiro
Tipo de material de la bandaGoma
Color de bandaNegro
Ancho de banda20 milímetros
Tipo de cierreCierre plegable
Profundidad de resistencia al agua100 metros (330 pies)
Características especialesLuminescent Hands, Transparent Case Back
Peso del artículo250 gramos
Dimensiones del producto20 x 15 x 10 cm
FabricanteRAYMOND WEIL SA
Fecha de primera disponibilidad6 de abril de 2016

8. Garantía y soporte

8.1 Garantía del fabricante

Your Raymond Weil watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of the warranty.

8.2 Atención al cliente

For service, repairs, or any inquiries regarding your watch, please contact an authorized Raymond Weil service center or the manufacturer directly.

  • Fabricante: RAYMOND WEIL SA
  • DIRECCIÓN: AVENUE EUGENE-LANCE 36-38 - P.O. BOX 1569 - 1211 GENEVE 26 - SWITZERLAND
  • Teléfono: +41(0)22 884 00 55
  • Importador (India): ETHOS Ltd, C-2, Upper Basement, Square One Mall, Delhi-110017

© Raymond Weil S.A. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.