Introducción
Thank you for choosing the Beurer BF 220 Body Composition Digital Scales. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new scales. Please read these instructions carefully before first use and keep them for future reference.
The Beurer BF 220 scales are designed to measure body weight, body fat, body water, and muscle rate, providing a comprehensive overview de tu composición corporal.
Información de seguridad
- Always place the scales on a firm, level surface to ensure accurate measurements.
- Do not use the scales in areas with high humidity or near water.
- The scales are for personal use only and not intended for medical or commercial purposes.
- Limpiar las escalas con adamp paño; no utilice agentes de limpieza abrasivos.
- Mantener fuera del alcance de los niños.
- Individuals with pacemakers or other medical implants should not use the body composition analysis function. Consult your doctor before use.
- La capacidad máxima de carga es de 180 kg. No exceda este límite.
Contenido del paquete
- 1 x Beurer BF 220 Body Composition Digital Scales
- 1 x Manual de instrucciones
- Batteries (not always included, check product packaging)
Configuración
1. Instalación de la batería
Locate the battery compartment on the underside of the scales. Insert the required batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. Unit Selection (Kg/Lb/St)
After battery installation, or by pressing a dedicated button (often on the underside or near the display), you can select your preferred unit of measurement: kilograms (kg), pounds (lb), or stones (st). The scales feature a Kg/Lb/St selector.
3. Colocación inicial
Coloque la báscula sobre una superficie dura, plana y estable. Evite alfombras o suelos irregulares, ya que pueden afectar la precisión.
Instrucciones de funcionamiento
Pesaje básico
- Step onto the scales barefoot. The scales will automatically turn on due to the "Automatic start" feature.
- Permanezca quieto hasta que su peso se muestre y se estabilice.
- The scales will automatically turn off after a few seconds of inactivity ("Automatic stop").
Medición de la composición corporal
The Beurer BF 220 scales can determine weight, body fat, body water, and muscle rate using bioelectrical impedance analysis (BIA). For accurate results, ensure your feet are clean and make good contact with the brushed stainless steel electrodes.
- Step onto the scales barefoot.
- Wait for your weight to be displayed.
- The scales will then proceed to measure and display your body fat, body water, and muscle rate sequentially.
- For consistent results, measure at the same time of day, preferably in the morning before breakfast or exercise.
Mantenimiento
Limpieza
Clean the scales regularly with a slightly damp cloth. Do not use harsh or abrasive cleaning agents, as these can damage the surface or electrodes. Do not immerse the scales in water.
Almacenamiento
Store the scales in a dry, cool place. Avoid extreme temperatures and direct sunlight. If not in use for an extended period, it is recommended to remove the batteries to prevent leakage.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| "Err" or "OL" displayed | Sobrecarga o error de medición. | The maximum load capacity is 180 kg. Ensure the weight does not exceed this limit. Step off and then back on the scales. |
| Lecturas inexactas | Scales on an uneven surface, low battery, or movement during measurement. | Place scales on a firm, level surface. Replace batteries if low. Stand still during measurement. |
| Sin pantalla | Las baterías están agotadas o insertadas incorrectamente. | Verifique la polaridad de las baterías y reemplácelas si es necesario. |
| Body composition not measured | Feet not making proper contact with electrodes, or user has medical implants. | Ensure feet are clean and make full contact with the stainless steel electrodes. If you have medical implants, this function may not work or is not recommended. |
Presupuesto
- Modelo: Beurer BF 220
- Funciones de medición: Weight, Body Fat, Body Water, Muscle Rate
- Mostrar: XXL white illuminated LCD screen, 40 mm number size
- Material de la superficie: Safety glass (32 x 32 cm, 8mm thick)
- Electrodos: Acero cepillado sin manchas
- Capacidad de carga: 180 kilogramos
- Precisión de lectura: 100 gramos
- Dimensiones: Aproximadamente 32 x 32 x 2.5 cm (largo x ancho x alto)
- Características: Automatic start and stop, Kg/Lb/St selector, Overload indicator, Backlit Display
- Peso del artículo: 2.3 kilogramos
- GTIN: 04211125748135
Garantía y soporte
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Beurer webSitio. Conserve su comprobante de compra para cualquier reclamación de garantía.
For further assistance, you may contact Beurer customer service directly.