WAC Lighting QP-LED903-DB 900 Series LED Socket Set Instruction Manual

1. Introducción y producto terminadoview

This manual provides essential instructions for the safe and efficient use of the WAC Lighting QP-LED903-DB 900 Series LED Socket Set. This LED socket set is designed for indoor use and features energy-efficient LED technology.

Key features include a collar with a threaded set screw for adjusting lamp positions within a shade, smooth and continuous ELV dimming capabilities, and a long rated life. The system operates at 12 Volts and provides 450 lumens with a color temperature of 3000 Kelvin and a CRI of 82.

Figura 1: Sobreview of the WAC Lighting QP-LED903-DB LED Socket Set.

2. Información de seguridad

ADVERTENCIA: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always check local laws and regulations before installation and use.

• Desconecte siempre la alimentación en el disyuntor antes de realizar la instalación, el desmontaje o el mantenimiento.
• La instalación debe ser realizada por un electricista calificado de acuerdo con todos los códigos eléctricos aplicables.
• Do not rest glass components directly on the socket base.
• Ensure the product is used only in dry, indoor locations.
• Do not modify the product in any way; unauthorized modifications may void the warranty and create safety hazards.
• Este producto está listado por UL, lo que indica cumplimiento con los estándares de seguridad.

3. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• WAC Lighting QP-LED903-DB 900 Series LED Socket Set (1 unit)
• Manual de instrucciones (1 unidad)
• Collar with threaded set screw

Nota: The package dimensions are approximately 5.62 inches (length) x 4.255 inches (width) x 2.765 inches (height).

4. Configuración e instalación

This LED socket set is designed for protruding mounting and requires a 12 Volt corded electric power source with a US-style plug format (Type A).

1. Desconexión de energía: Antes de comenzar, asegúrese de que el suministro de energía al área de instalación esté completamente desconectado en el disyuntor principal.
2. Montaje: Securely mount the socket set using appropriate hardware for a protruding installation. Ensure the mounting surface is stable and can support the fixture's weight.
3. Alambrado: Connect the 12 Volt corded electric power source to the socket set. Follow all local electrical codes and the wiring diagrams provided with your specific fixture (if applicable).
4. Lamp Ajuste de posición: The included collar with a threaded set screw allows for varying lamp positions inside the shade. Adjust the collar to achieve the desired lamp depth and secure it by tightening the set screw.
5. Glass Placement: If your fixture includes glass components, ensure they are installed correctly and do not rest directly on the socket base.
6. Reconexión de energía: Una vez completada la instalación y todas las conexiones estén seguras, restablezca la energía en el disyuntor.

Figure 2: Detail of the LED socket set, showing the collar for lamp position adjustment.

5. Instrucciones de funcionamiento

The WAC Lighting QP-LED903-DB LED Socket Set is designed for straightforward operation.

• Encendido/apagado: Control the light using the wall switch connected to the fixture.
• Atenuación: This socket set supports smooth and continuous ELV (Electronic Low Voltage) dimming. Use a compatible ELV dimmer switch for dimming functionality.
• Eficiencia Energética: The integrated LED technology ensures energy-efficient operation with no projected UV or IR radiation.

6. Mantenimiento

The WAC Lighting QP-LED903-DB LED Socket Set is designed for long-term, low-maintenance operation.

• Limpieza: To clean the socket set, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or any cleaning agents that could damage the finish or electrical components.
• Vida útil del LED: The integrated LED has a rated life of 50,000 hours (estimated life of 30,000 hours), meaning no bulb replacement is typically required for the life of the product under normal operating conditions.
• Inspección: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, disconnect power immediately and consult a qualified electrician.

7. Solución de problemas

If you encounter issues with your LED socket set, refer to the following common troubleshooting steps:

• La luz no se enciende:
  • Verifique el disyuntor para asegurarse de que se suministre energía al artefacto.
  • Verifique que el interruptor de pared esté en la posición “ON”.
  • Asegúrese de que todas las conexiones del cableado sean seguras.
• Problemas de atenuación:
  • Confirm that a compatible ELV dimmer switch is being used.
  • Check the dimmer switch wiring.
• Luz parpadeante:
  • Asegúrese de que todas las conexiones estén apretadas.
  • Verifique que la fuente de alimentación sea estable.
  • If using a dimmer, ensure it is compatible and properly installed.

Si los problemas persisten después de intentar estos pasos, comuníquese con el servicio de atención al cliente.

8. Especificaciones

9. Información de garantía

The WAC Lighting QP-LED903-DB 900 Series LED Socket Set comes with a 5 año de garantía A partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.

For detailed warranty terms and conditions, please refer to the official WAC Lighting warranty policy or contact customer support.

10. Atención al cliente

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact WAC Lighting customer support.

Fabricante: Iluminación WAC

Please visit the official WAC Lighting webSitio para obtener información de contacto y recursos adicionales.