Señor vigas MB370

Mr. Beams MB370 Wireless LED Remote Control Spotlight User Manual

Modelo: MB370

1. Introducción

Thank you for choosing the Mr. Beams MB370 Wireless LED Remote Control Spotlight. This battery-powered spotlight is designed to provide bright, motion-activated illumination for various outdoor and indoor areas. Featuring a motion sensor, photocell, and remote control, it offers versatile lighting solutions for security, convenience, and safety. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.

2. Contenido del paquete

Verifique que todos los componentes estén presentes en su paquete:

  • Mr. Beams MB370 Wireless LED Spotlight
  • Mando a distancia
  • Herrajes de montaje (tornillos y anclajes)
  • Manual de usuario

Nota: Batteries are not included and must be purchased separately. The spotlight requires 3 D-cell batteries, and the remote control requires 2 AAA batteries.

3. Información importante de seguridad

  • No mezcle pilas viejas y nuevas.
  • No mezcle pilas alcalinas, estándar (carbono-zinc) o recargables (níquel-cadmio).
  • Always insert batteries with the correct polarity (+ and -).
  • Deseche las baterías usadas correctamente de acuerdo con las normas locales.
  • Do not submerge the unit in water. While weather-resistant, it is not waterproof.
  • No mire directamente a la luz LED.
  • Ensure the mounting surface is stable and can support the weight of the spotlight.

4. Configuración e instalación

4.1 Instalación de la batería

  1. Destacar: Twist the back cover of the spotlight counter-clockwise to open the battery compartment. Insert 3 D-cell batteries, ensuring correct polarity. Replace the cover and twist clockwise to secure.
  2. Mando a distancia: Open the battery compartment on the back of the remote. Insert 2 AAA batteries, ensuring correct polarity. Close the compartment.

4.2 Montaje del foco

The MB370 spotlight is designed for wall mounting. Choose a location that provides optimal coverage and is within range of the remote control (up to 30 feet).

  1. Select a desired mounting location. The spotlight can be installed on walls, eaves, or other flat surfaces.
  2. Utilice el soporte de montaje como plantilla para marcar los orificios de los tornillos.
  3. Drill pilot holes if necessary, and insert wall anchors if mounting into drywall or masonry.
  4. Fije el soporte de montaje a la superficie utilizando los tornillos proporcionados.
  5. Attach the spotlight to the mounting bracket, ensuring it clicks securely into place.
  6. Adjust the angle of the spotlight to direct the light as needed.
Mr. Beams MB370 spotlight mounted on a wall next to a door, illuminating the entrance.

Image: Mr. Beams MB370 spotlight mounted on a wall next to a door, illuminating the entrance. This demonstrates a typical installation scenario for the spotlight.

5. Instrucciones de funcionamiento

5.1 Funcionamiento del sensor de movimiento

The spotlight features a built-in motion sensor that activates the light when movement is detected within its range (up to 3 feet). The integrated photocell ensures the light only activates in low-light conditions to conserve battery life.

  • When motion is detected in darkness, the spotlight will turn on automatically.
  • The default auto shut-off setting for motion activation is 3 seconds after motion ceases.

5.2 Funciones de control remoto

The remote control allows for manual operation and adjustment of settings.

Mr. Beams MB370 spotlight with its remote control, showing buttons for ON, OFF, brightness, and motion sensor settings.

Image: Mr. Beams MB370 spotlight with its remote control, showing buttons for ON, OFF, brightness, and motion sensor settings. This illustrates the product and its control unit.

  • Botón de encendido: Press to manually turn the spotlight ON.
  • Botón APAGADO: Press to manually turn the spotlight OFF.
  • Configuración de brillo: The remote allows you to cycle through three brightness levels: 60, 90, or 140 lumens. Press the brightness button to adjust.
  • Temporizador de apagado automático: When manually activated with the remote, you can set the light to turn off after 1 hour or 4 hours. Consult the remote's specific button for this function.
  • Activación del sensor de movimiento: The remote can also be used to enable or disable the motion sensor functionality.
A person using the remote control to activate a Mr. Beams spotlight mounted outside a door.

Image: A person using the remote control to activate a Mr. Beams spotlight mounted outside a door. This demonstrates the practical use of the remote control.

6. Mantenimiento

6.1 Reemplazo de batería

When the light output diminishes or the unit stops functioning, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.

6.2 Limpieza

Wipe the spotlight and remote control with a soft, damp Paño. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar la unidad.

7. Solución de problemas

ProblemaPosible causaSolución
La luz no se enciende.1. Dead or incorrectly installed batteries.
2. Motion sensor obstructed or dirty.
3. Ambient light too bright (photocell preventing activation).		1. Reemplace las baterías, asegurándose de la polaridad correcta.
2. Clean sensor lens. Ensure no obstructions are blocking the sensor.
3. Pruebe en un entorno más oscuro.
La luz permanece encendida continuamente.1. Constant motion in sensor range.
2. Mal funcionamiento del sensor.
3. Extreme cold weather affecting sensor.		1. Relocate the spotlight or adjust its angle to avoid constant motion.
2. Remove and reinsert batteries. If problem persists, contact support.
3. In very cold climates, battery performance and sensor accuracy may be reduced.
El control remoto no funciona.1. Dead or incorrectly installed batteries.
2. Fuera de rango.
3. Obstruction between remote and spotlight.		1. Replace AAA batteries in the remote, ensuring correct polarity.
2. Move closer to the spotlight (within 30 feet).
3. Ensure a clear line of sight between the remote and the spotlight.

8. Especificaciones

  • Modelo: MB370
  • Marca: señor vigas
  • Fuente de luz: CONDUJO
  • Lúmenes: 60, 90, 140 (ajustable)
  • Color de la luz: Blanco frío (5000 Kelvin)
  • Fuente de energía: Battery Powered (Spotlight: 3 D-cell, Remote: 2 AAA)
  • Rango del sensor de movimiento: Hasta 3 pies
  • Auto Shut-Off (Motion): 3 segundos después de que se detenga el movimiento
  • Auto Shut-Off (Remote): 1 hour or 4 hours
  • Tipo de controlador: Mando a distancia
  • Uso en interiores y exteriores: Exterior
  • Material: Plástico
  • Color: Blanco
  • Peso del artículo: 0.7 libras
  • Tipo de instalación: Wall Mount / Flush Mount

9. Garantía y soporte

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Mr. Beams webSitio. Conserve su comprobante de compra para cualquier reclamación de garantía.

If you encounter any issues not covered in this manual, please contact Mr. Beams customer service for assistance.

© 2023 Mr. Beams. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.