1. Producto terminadoview
The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65 °F a 650 °F (-54 °C a 343 °C).
It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.
Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.
2. Información de seguridad
Always read and understand all safety precautions before using this product. Use personal protective equipment as required.
2.1. Precautionary Statements - Prevention
- Contains: Calcium carbonate, Iron oxide.
- Obtenga instrucciones especiales antes de usar.
- No manipule hasta que todas las precauciones de seguridad hayan sido leídas y comprendidas.
- Use equipo de protección personal según sea necesario.
2.2. Precautionary Statements - Response
- SI EN LOS OJOS: Enjuague cuidadosamente con agua durante varios minutos. Quítese las lentes de contacto, si lleva y resulta fácil. Continúe enjuagando. Si la irritación ocular persiste, consulte a un médico.
- SI EN LA PIEL: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.
2.3. Precautionary Statements - Storage
- Proteger de la luz solar.
- Almacenar en un lugar bien ventilado.
- Tienda cerrada.
- Mantener fuera del alcance de los niños.
3. Configuración
3.1. Preparación de la superficie
For optimal results, ensure that all surfaces where the gasket maker will be applied are limpio y seco. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.
4. Instrucciones de aplicación
- Prepare Nozzle: Corta la boquilla al tamaño de cordón deseado.
- Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
- Ensamblar piezas: Immediately assemble the parts while the silicone is still wet.
- Ajuste inicial: Finger tighten the assembly until the material begins to squeeze out around the flange.
Imagen 4.1: Example of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.
5. Curado y acabado
- Initial Dry Time: Allow the gasket maker to dry for una hora.
- Ajuste final: After the initial dry time, tighten the assembly to the manufacturer's specified torque.
- Tiempo de curado completo: Permitir 24 horas for the gasket maker to fully cure before filling with fluids or returning the component to service.
6. Mantenimiento
6.1. Almacenamiento del producto
Después de cada uso, replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.
7. Troubleshooting and Limitations
Nota importante: Este producto es NO recomendado for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.
8. Especificaciones del producto
| Característica | Detalle |
|---|---|
| Nombre del producto | Permatex High-Temp Red RTV Silicone Gasket Maker |
| Número de modelo | 81160 |
| Marca | Permatex |
| Material | Silicona |
| Color | Rojo |
| Temperature Range (Intermittent) | -65 °F a 650 °F (-54 °C a 343 °C) |
| Tiempo de curado completo | 24 horas |
| Volumen del artículo | 3 onzas líquidas |
| Nivel de resistencia al agua | Impermeable |
| Código Postal | 686226811608 |
9. Información de eliminación
Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.
10. Contacto y soporte
For further assistance or inquiries, please contact Permatex:
- Fabricante: Permatex Chemicals, a division of ITW
- DIRECCIÓN: Solon, OH 44139, USA
- Número gratuito: 866-732-9502
- Websitio: www.permatex.com
Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.
11. Información de garantía
Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com o llamar 866-732-9502 for the most current warranty information.