1. Introducción
The Argox AS8520 is a high-performance cordless imager designed for efficient barcode scanning. It features advanced wireless communication technology, allowing for a data transmission range of up to 100 meters. Equipped with a long-lasting Li-ion battery and an IP42 sealing level, the AS8520 is built for durability and mobility across various environments, including offices, supermarkets, warehouses, and manufacturing facilities.
2. Producto terminadoview
The AS8520 barcode scanner is designed for comfortable handling and robust performance. Key components include the scanning window, trigger button, and ergonomic grip.
Figura 2.1: Lado view of the Argox AS8520 Barcode Scanner, showing the ergonomic handle and trigger button.
Figura 2.2: Frente view of the Argox AS8520 Barcode Scanner, highlighting the scanning window and product labels.
3. Guía de configuración
3.1. Instalación y carga de la batería
- Ensure the scanner is powered off before installing or removing the battery.
- Locate the battery compartment on the scanner handle.
- Inserte el paquete de baterías de iones de litio, asegurándose de la polaridad correcta.
- Cierre bien el compartimento de la batería.
- Connect the scanner to its charging base or power adapter using the provided cable. Allow the battery to fully charge before first use.
3.2. Connecting to a Host Device
The Argox AS8520 can connect wirelessly to various host devices, including desktops, laptops, and smartphones. Refer to the separate quick start guide for specific pairing instructions for your operating system or device type.
4. Instrucciones de funcionamiento
4.1. Escaneo básico
- Asegúrese de que el escáner esté encendido y emparejado correctamente con su dispositivo host.
- Apunte la ventana de escaneo hacia el código de barras que desea escanear.
- Press and hold the trigger button. A red LED light source (630nm Visible Red LED) will illuminate the barcode.
- Position the scanner at an appropriate distance (the AS8520 offers superior depth of field up to 40 inches on 40-mil codes) until the barcode is successfully read. A successful scan is typically indicated by an audible beep and/or a visual indicator.
- Suelte el botón del gatillo.
4.2. Funciones de escaneo avanzadas
- Rapid Scan Rate: The AS8520 provides a rapid scan rate of 450 scans/sec for efficient data capture.
- Barcode Symbology Support: Supports GS1 Databar (RSS) and CS (Composite Symbology) barcodes.
- Sunlight Readability: Designed to be readable under direct sunlight conditions.
5. Mantenimiento
5.1. Limpieza del escáner
- Asegúrese de que el escáner esté apagado antes de limpiarlo.
- Utilice un paño suave y sin pelusa ligeramenteampLimpie con agua o una solución de limpieza suave el exterior del escáner.
- For the scanning window, use a lens cleaning cloth to avoid scratches.
- Do not use abrasive cleaners, solvents, or immerse the scanner in liquid. The IP42 sealing level protects against dust and light water splashes, but not full immersion.
5.2. Cuidado de la batería
- To maximize battery life, avoid fully discharging the Li-ion battery frequently.
- Guarde el escáner en un lugar fresco y seco cuando no lo utilice durante períodos prolongados.
- If the battery performance degrades significantly, consider replacing it with an authorized Argox replacement battery.
6. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El escáner no se enciende. | La batería está descargada o no está instalada correctamente. | Cargue la batería. Asegúrese de que esté correctamente colocada en su compartimento. |
| El escáner no lee códigos de barras. | Barcode is damaged, scanner is too far/close, or incorrect symbology settings. | Ensure the barcode is clear. Adjust scanning distance. Check scanner programming for supported barcode types. |
| No se transmiten datos al dispositivo host. | Scanner not paired or out of range. | Re-pair the scanner with the host device. Ensure the scanner is within the 100-meter transmission range. |
| El escáner no responde. | Fallo temporal del software. | Perform a soft reset by powering off and then on the scanner. If issues persist, consult the manufacturer's support. |
7. Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Modelo | AS8520 |
| Velocidad de escaneo | 450 escaneos/seg |
| Fuente de luz | 630nm Visible Red LED |
| Rendimiento del escaneo | Starting at 0.1mm (4 mil) |
| Profundidad de campo | Up to 40 inches on 40-mil codes |
| Rango de transmisión de datos | 100 metros (inalámbrico) |
| Dispositivos compatibles | Computadora de escritorio, computadora portátil, teléfono inteligente |
| Fuente de poder | Battery Powered (Li-ion battery pack) |
| Temperatura de funcionamiento | 0 °C a 50 °C (32 °F a 122 °F) |
| Temperatura de almacenamiento | -20 °C a 70 °C (-4 °F a 158 °F) |
| Humedad | 10% a 90% de humedad relativa, sin condensación |
| Nivel de luz | Hasta 70,000 lux |
| Current - Operating | 225 mA a 4.2 VCC |
| Current - Standby | 32 mA a 4.2 VCC |
| Power - Operating | 900mW |
| Power - Standby | 150mW |
| Reliability (Trigger) | 1,000,000 de veces |
| Reliability (Cable) | 320,000 times (90° bend) |
| Especificación de caída | 1.5 metros |
| Nivel de sellado | IP42 |
| Peso del artículo | 1.3 kilogramos |
| GTIN/UPC | 702563636336 |
8. Garantía y soporte
For detailed warranty information, please refer to the warranty card included with your product or visit the official Argox website. For technical support, service, or replacement parts, please contact your authorized Argox reseller or Argox customer service directly.