Paulmann 28325 LED Diamond Quadro GU5.3 12V 2700K Instruction Manual

1. Introducción y producto terminadoview

This manual provides essential information for the safe and efficient use of your Paulmann 28325 LED Diamond Quadro lamp. This product is a 3-watt LED lamp designed for 12-volt systems, featuring a GU5.3 base and emitting a warm white light at 2700 Kelvin. Its unique crystal reflector design provides directed illumination.

Image 1.1: The Paulmann 28325 LED Diamond Quadro GU5.3 lamp.

2. Instrucciones de seguridad

Please read and understand all safety instructions before installing or operating the lamp. El incumplimiento de estas instrucciones puede provocar descargas eléctricas, incendios u otros peligros.

• Seguridad eléctrica: Desconecte siempre la alimentación del artefacto antes de instalarlo, quitarlo o realizarle mantenimiento.amp.
• VolumentagCompatibilidad: Este lamp operates on a CC de 12 voltios power supply. Do not connect it to a 230-volt AC mains supply without a suitable transformer.
• No regulable: Este LED lamp is no regulableNo lo utilice con reguladores de intensidad, ya que esto puede dañar la lamp y anulará la garantía.
• Clasificación IP20: El lamp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use only in dry, indoor environments.
• Temperatura: Asegúrese de que haya una ventilación adecuada alrededor del lamp to prevent overheating. Do not cover the lamp.
• Desmontaje: Do not attempt to disassemble, modify, or repair the lamp. No hay partes reparables por el usuario adentro.
• Desecho: Deseche el lamp according to local regulations for electronic waste.

3. Configuración e instalación

Follow these steps to properly install your Paulmann 28325 LED Diamond Quadro lamp:

1. Desconexión de energía: Ensure the power supply to the lighting fixture is completely switched off at the main circuit breaker before beginning installation.
2. Identificar el zócalo: Verify that your fixture has a compatible GU5.3 socket. The GU5.3 base features two pins spaced 5.3mm apart.
3. Insertar Lamp: Carefully align the two pins of the LED lamp with the holes in the GU5.3 socket. Gently push the lamp into the socket until it is securely seated. Do not force the lamp.
4. Fuente de alimentación: Ensure the fixture is connected to a stable 12-volt DC power supply. If replacing a halogen lamp, ensure the existing transformer is compatible with LED loads.
5. Restaurar energía: una vez que yoamp is securely installed, restore power to the fixture at the main circuit breaker.

Image 3.1: Close-up of the GU5.3 LED lamp, showing the base pins.

Image 3.2: Diagram showing different lamp base types, including GU5.3 (12V section).

4. Instrucciones de funcionamiento

Operating the Paulmann 28325 LED Diamond Quadro lamp es sencillo:

• Encender / apagar: Use the standard wall switch or fixture switch to turn the lamp encendido o apagado.
• Salida de luz: El lamp provides a directed, warm white light (2700K) suitable for accent lighting or general illumination in appropriate fixtures.
• No regulable: Como se dijo anteriormente, esta lamp is not designed for dimming. Attempting to dim it may cause flickering, damage, or premature failure.

5. Mantenimiento

The Paulmann 28325 LED Diamond Quadro lamp Requiere un mantenimiento mínimo debido a su larga vida útil y diseño duradero.

• Limpieza: Para limpiar el lamp, asegúrese de que la alimentación esté apagada y que lamp is cool. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lampacabado o componentes internos.
• Lamp Reemplazo: El lamp has an average lifespan of 15,000 hours. When it reaches the end of its life, replace it with a new Paulmann 28325 LED Diamond Quadro lamp or a compatible GU5.3 12V LED lamp.
• No hay piezas que el usuario pueda reparar: El lamp contains no user-serviceable parts. Do not attempt to open or repair it.

6. Solución de problemas

If you encounter issues with your Paulmann 28325 LED Diamond Quadro lamp, consulte la siguiente guía de solución de problemas:

• Lamp No se enciende:
  • Asegúrese de que el suministro de energía al dispositivo esté encendido.
  • Compruebe que el lamp is correctly and securely seated in the GU5.3 socket.
  • Verify that the power supply is providing 12 volts DC. An incompatible or faulty transformer can prevent the lamp de trabajar.
  • Inspeccione el lamp for any visible damage. If damaged, replace the lamp.
• Lamp Parpadea:
  • Confirme que el lamp No está conectado a un regulador de intensidad. Este lamp No es regulable.
  • Check the 12V DC power supply for stability. Fluctuations in voltagPuede provocar parpadeos.
  • Ensure the transformer is compatible with LED loads. Some older transformers designed for halogen lamps may not work correctly with LEDs.
• Light Output is Weak or Incorrect Color:
  • Verifique el lamp specifications match your requirements (e.g., 2700K warm white).
  • Asegúrese de que lamp is receiving the correct 12V DC voltage. Under-voltage can reduce light output.

If these steps do not resolve the issue, please contact Paulmann customer support.

7. Especificaciones

Detailed technical specifications for the Paulmann 28325 LED Diamond Quadro lamp:

Image 7.1: EU Energy Label for Paulmann 28325.

Image 7.2: Product data sheet with detailed specifications.

Para obtener información más detallada del producto, puede consultar la base de datos EPREL: https://eprel.ec.europa.eu/qr/860106

8. Garantía y soporte

Paulmann products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Paulmann websitio o póngase en contacto con su distribuidor.

Conserve su recibo de compra como comprobante de compra para cualquier reclamo de garantía.