Manual del usuario del relé de pulsos electromecánico Finder Serie 27 Tipo 270182300000

1. Introducción

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Finder Series 27 Type 270182300000 Electromechanical Pulse Relay. Please read this manual thoroughly before using the product and retain it for future reference.

The Finder Series 27 pulse relay is a 10 A, unipolar switch with 1 normally open (NO) contact, designed for AC 50/60 Hz systems at 230 V. It features a standard design with socket clamps for connection and is suitable for panel mounting.

2. Información de seguridad

ADVERTENCIA: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Always disconnect power before installing, servicing, or removing the relay.
• Asegure una conexión a tierra adecuada para evitar descargas eléctricas.
• Verifique que el volumen de suministrotage and current ratings match the relay's specifications.
• Do not operate the relay in environments exceeding its specified temperature or humidity limits.
• Avoid exposing the relay to moisture or corrosive substances.

3. Producto terminadoview

The Finder Series 27 Electromechanical Pulse Relay is designed for applications requiring sequential switching, such as lighting control. Key features include:

• Montaje en panel: Designed for secure installation within electrical panels.
• AC Coils: Operates with alternating current.
• 1 NO Contact: Features one normally open contact for switching circuits.
• 3 Sequences Available: Supports various operational sequences.
• Alta capacidad de potencia: Clasificado para 10 Amps and 2400 Watts at 230 Volts.

Figura 3.1: Frente view of the Finder Series 27 Electromechanical Pulse Relay, showing its transparent casing and terminal connections.

4. Configuración e instalación

This pulse relay is designed for panel mounting. Follow these steps for proper installation:

1. Desconexión de energía: Ensure all power to the installation area is disconnected at the main circuit breaker before beginning any work.
2. Montaje: Securely mount the relay within an electrical panel using appropriate fasteners. The relay dimensions are approximately 1.26 x 2.17 x 2.76 inches.
3. Conexiones de cableado:
   • Identify the three terminals on the relay.
   • Connect the control circuit wires to the coil terminals (A1, A2) as indicated on the relay. The coil voltage es 230 voltios CA.
   • Connect the load circuit wires to the contact terminals (1 NO) using the clamp-type connectors. The relay is rated for 10 Amps.
   • Asegúrese de que todas las conexiones estén firmes y seguras para evitar contactos sueltos y sobrecalentamiento.
4. Verificación: Double-check all wiring against the electrical diagram for your specific application.
5. Restauración de energía: Una vez completada y verificada la instalación, restablezca la energía al circuito.

Figura 4.1: Detallado view of the Finder Series 27 Relay's screw terminals, illustrating connection points for wiring.

5. Instrucciones de funcionamiento

The Finder Series 27 pulse relay operates automatically based on the control signals it receives. It is commonly used in applications where a momentary input signal triggers a change in the output state, which then remains until the next momentary input.

• When a pulse is applied to the coil terminals (A1, A2), the internal mechanism latches, changing the state of the 1 NO contact.
• The contact remains in this new state even after the control pulse is removed.
• A subsequent pulse will revert the contact to its original state.
• The relay supports three distinct operational sequences, which are determined by the specific model variant and internal configuration. Refer to your system's wiring diagram for the exact sequence implemented.

Figura 5.1: Example of the Finder Series 27 Relay integrated into a kitchen lighting system, demonstrating its application in controlling light fixtures.

Figura 5.2: The Finder Series 27 Relay shown in a living room setting, illustrating its use for managing multiple light sources.

6. Mantenimiento

The Finder Series 27 pulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:

• Inspección visual: Inspeccione periódicamente el relé para detectar cualquier signo de daño físico, decoloración o conexiones sueltas.
• Limpieza: Si es necesario, limpie suavemente el exterior del relé con un paño suave y seco. No utilice disolventes ni limpiadores abrasivos.
• Verificación de conexión: Ensure all wiring connections remain tight and secure.
• Condiciones ambientales: Verifique que el entorno operativo permanezca dentro de los rangos de temperatura y humedad especificados.

Nota: The relay is a sealed unit and is not user-serviceable internally. Do not attempt to open the casing.

7. Solución de problemas

If the Finder Series 27 pulse relay is not functioning as expected, consider the following troubleshooting steps:

• No Response to Control Signal:
  • Check if power is supplied to the control circuit and the relay coil (A1, A2).
  • Verify that the control signal voltage matches the relay's coil voltage (230 VCA).
  • Inspect control circuit wiring for breaks or loose connections.
• Carga que no cambia:
  • Ensure the relay is receiving control pulses and its internal mechanism is audibly clicking or visibly changing state (if applicable).
  • Check the load circuit wiring for continuity and secure connections.
  • Verifique que la corriente de carga no exceda los 10 del relé. Amp clasificación.
  • Confirm that the load itself is functional.
• Relay Overheating:
  • Ensure the load current does not exceed the relay's maximum rating.
  • Check for proper ventilation around the relay within the panel.
  • Verifique que la temperatura ambiente esté dentro del rango operativo especificado.

If issues persist after performing these checks, contact a qualified electrician or Finder technical support.

8. Especificaciones

9. Garantía y soporte

For information regarding warranty coverage, technical support, or service, please contact Finder directly through their official webSitio web o distribuidores autorizados. Conserve su recibo de compra como comprobante.

Fabricante: BUSCADOR

Número de pieza: 27.01.8.230.0000