1. Información importante de seguridad
Lea atentamente todas las instrucciones antes de instalar y usar el producto. Conserve este manual para futuras consultas.
- Seguridad eléctrica: This product requires a 120V GFCI (Ground Fault Circuit Interrupter) outlet. Do not use with an extension cord or adapter unless specifically approved by the manufacturer. Ensure the power cord is not damaged.
- Suministro de agua: Connect only to a potable water supply. Ensure all connections are secure to prevent leaks.
- Límite de peso: Do not stand on the bidet seat or lid. The seat is designed for sitting only.
- Limpieza: Use only mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the surface or internal components.
- Temperatura: Do not expose the unit to freezing temperatures. Drain water if the unit will be unused for an extended period in cold conditions.
2. Producto terminadoview
The Lotus ATS-2000 Elongated Smart Bidet Seat offers advanced features for personal hygiene and comfort.
Características principales:
- PureStream Function: Designed to assist with constipation relief.
- Agua caliente ilimitada: Hybrid heating system provides instant and continuous warm water at your desired temperature.
- Asiento con calefacción: Adjustable temperature settings for enhanced comfort.
- Secador de aire caliente: Adjustable air temperature for drying after washing.
- Control remoto inalámbrico: Provides convenient operation of all functions.
- Boquilla autolimpiable: Stainless steel nozzle with automatic cleaning function.
- Modo de ahorro de energía: Reduces electricity consumption.
Componentes:
The Lotus ATS-2000 includes the bidet seat unit, a wireless remote control, and all necessary installation parts.
Figure 2.1: Lotus ATS-2000 Elongated Smart Bidet Seat. This image shows the overall design of the bidet seat installed on a toilet.
3. Instalación
The Lotus ATS-2000 is designed for easy DIY installation. All necessary parts are included.
3.1 Compatibilidad del inodoro
Ensure your toilet is compatible with an elongated bidet seat. Measure your toilet bowl from the front edge to the center of the bolt holes.
Figure 3.1: Toilet bowl measurement guide. Round toilets typically measure 19.4 inches or less, while elongated toilets measure 20.6 inches or more from the front edge to the bolt holes.
3.2 Requisitos eléctricos
A dedicated 120V GFCI outlet is required for safe operation. If an appropriate outlet is not available, consult a qualified electrician for installation.
3.3 Step-by-Step Installation (General Guide)
- Cierre el suministro de agua al inodoro y tire de la cadena para vaciar el tanque.
- Retire el asiento del inodoro actual.
- Install the mounting plate onto the toilet bowl using the provided bolts and washers.
- Deslice el asiento del bidé sobre la placa de montaje hasta que encaje en su lugar.
- Connect the bidet's water supply hose to the toilet's fill valve (using the provided T-valve) and then to the bidet unit.
- Abra el suministro de agua y verifique que no haya fugas.
- Plug the bidet into the 120V GFCI outlet.
Refer to the detailed installation diagram included in your product packaging for specific steps and component identification.
4. Operación
The Lotus ATS-2000 is operated using its wireless remote control. Ensure the remote has fresh batteries and is within range of the bidet unit.
4.1 Funciones de control remoto
Figure 4.1: Wireless remote control with various function buttons. This image illustrates the layout of the remote control, showing buttons for Purestream, Rear Wash, Lady Wash, Dryer, Massage Wash, and Smart Energy Save, along with temperature and pressure adjustments.
- PureStream: Activates the specialized wash for constipation relief.
- Lavado trasero: Limpieza posterior estándar.
- Lady Wash: Limpieza femenina suave.
- Secadora: Activates the warm air dryer. Adjust temperature with +/- buttons.
- Asiento con calefacción: Adjust seat temperature with dedicated buttons.
- Presión del agua: Adjust water spray intensity with +/- buttons.
- Posición de la boquilla: Ajuste la posición hacia adelante/atrás de la boquilla.
- Oscilación: Activates oscillating nozzle movement for wider cleaning.
- Lavado de masaje: Provides a pulsating water stream.
- Ahorro de energía: Activates power-saving mode.
4.2 Vídeo de demostración del producto
Video 4.2: Official product demonstration for the Lotus ATS-2000. This video illustrates the bidet's features, including the automatic lid opening, self-cleaning nozzle, various wash functions (Purestream, Rear Wash, Lady Wash), and the warm air dryer.
5. Mantenimiento
Regular cleaning and maintenance will ensure the longevity and hygienic operation of your Lotus ATS-2000 bidet seat.
5.1 Limpieza de la boquilla
The stainless steel nozzle features an automatic self-cleaning function before and after each use. For manual cleaning:
- Ensure the bidet is powered off.
- Gently pull out the nozzle.
- Use a soft cloth or brush with mild soap and water to clean the nozzle. Do not use abrasive materials.
- Push the nozzle back into its housing.
Figure 5.1: Close-up of the stainless steel self-cleaning nozzle. This image highlights the nozzle's material and its self-cleaning water spray.
5.2 Limpieza de la unidad
- Desenchufe la unidad del tomacorriente antes de limpiarla.
- Limpie las superficies exteriores con un paño suave, damp paño y un limpiador suave no abrasivo.
- No rocíe agua directamente sobre la unidad.
- Avoid using benzene, paint thinner, or abrasive cleaners.
6. Solución de problemas
If you encounter issues with your Lotus ATS-2000, refer to the following common troubleshooting steps:
| Problema | Posible causa | Solución |
|---|---|---|
| Sin energía / La unidad no se enciende | Cable de alimentación desenchufado, GFCI disparado, no llega energía al tomacorriente. | Ensure the power cord is securely plugged in. Reset the GFCI outlet. Check the circuit breaker. |
| No water spray / Red light blinking (water tank) | Water supply turned off, water filter clogged, low water pressure. | Ensure the toilet's water supply valve is fully open. Clean the water filter. Check household water pressure. |
| La temperatura del agua no está caliente | Heated water function off, temperature setting too low. | Activate the heated water function via remote. Increase the water temperature setting. |
| El asiento no se calienta | Función de asiento calefaccionado desactivada, configuración de temperatura demasiado baja. | Activate the heated seat function via remote. Increase the seat temperature setting. |
| El control remoto no responde | Dead batteries, remote out of range. | Replace remote batteries. Ensure remote is pointed towards the bidet unit and within operating range. |
Si el problema persiste después de intentar estos pasos, comuníquese con el servicio de atención al cliente.
7. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | ATS-2000Remote |
| Color | Blanco |
| Material | Acero inoxidable (boquilla) |
| Estilo | Alargado |
| Dimensiones del producto | 20.5" de largo x 18.5" de ancho |
| Peso del artículo | 8.62 kilogramos |
| Modo de operación | Automático |
| Requisito de potencia | 120V GFCI Outlet |
| GTIN/UPC | 700424890934 |
8. Garantía y soporte
For warranty information, product support, or to purchase replacement parts, please contact Lotus Hygiene System Inc. customer service.
Conserve su recibo de compra como comprobante de compra para reclamos de garantía.
Fabricante: Lotus Hygiene System Inc.
