Learning Resources Code & Go Robot Mouse Instruction Manual

Introducción

Embark on a coding adventure with the Learning Resources Code & Go Robot Mouse. This hands-on, screen-free programmable mouse introduces children aged 4 and up to the fundamentals of coding, fostering critical thinking and problem-solving skills. The toy transforms abstract programming concepts into tangible, enjoyable learning experiences. The colorful Robot Mouse features intuitive directional buttons on its back that correspond with the included coding cards, allowing children to create step-by-step sequences and watch their code come to life as the mouse follows instructions, lights up, and makes sounds.

¿Qué hay en la caja?

• 1 x Programmable Robot Mouse
• 30 x Double-sided Coding Cards
• 1 x Activity Guide

The mouse measures approximately 4 inches in length and requires 3 AAA batteries (not included).

Configuración

Instalación de la batería

1. Locate the battery compartment on the underside of the Robot Mouse.
2. Con un destornillador Phillips pequeño, desatornille la tapa del compartimiento de la batería.
3. Inserte 3 pilas AAA nuevas, asegurándose de la polaridad correcta (+/-).
4. Vuelva a colocar la tapa del compartimiento de la batería y asegúrela con el tornillo.

Preparing the Play Area

The Code & Go Robot Mouse is designed to work with activity sets (sold separately) or on any flat surface. If using an activity set, connect the green tiles to form a maze or path. Place obstacles and tunnels as desired to create challenges for the mouse.

Image: The Code & Go Robot Mouse with its activity set, showing green tiles, orange tunnels, and purple obstacles. The mouse is purple with colorful directional buttons.

Instrucciones de funcionamiento

Encendido/apagado

• To turn the Robot Mouse ON, slide the power switch located on its underside to the 'ON' position. The mouse's eyes will light up.
• To turn the Robot Mouse OFF, slide the power switch to the 'OFF' position.

Programming the Mouse

The Robot Mouse is programmed using the directional buttons on its back.

• Botones direccionales: Press the colored arrow buttons (forward, backward, left turn, right turn) to input a sequence of movements. Each press adds one step to the program.
• Botón Ir: Press the green 'Go' button (center) to execute the programmed sequence. The mouse will follow the commands in the order they were entered.
• Borrar Botón: Press the yellow 'Clear' button to erase the current program.
• Botón de acción: Press the red button to make the mouse perform a random action (e.g., squeak, blink lights, move back and forth).

Imagen: Un primer plano view of the purple Robot Mouse, highlighting the colorful directional buttons on its back.

Using Coding Cards

The 30 double-sided coding cards help visualize and plan the mouse's path before inputting commands. Lay out the cards in the desired sequence to represent the mouse's movements through a maze or to a target.

Image: A child's hands arranging green coding cards with arrows on a table, planning a path for the Robot Mouse.

Navigating Mazes

Create mazes using the activity tiles, tunnels, and obstacles. The goal is often to guide the Robot Mouse to a specific target, such as a piece of cheese. Plan the sequence of movements using the coding cards, then input the commands into the mouse and press 'Go'.

Image: The Robot Mouse positioned within a maze constructed from green tiles and purple wall pieces, with a yellow cheese wedge as the target.

Configuraciones de velocidad

The Robot Mouse offers two speeds to accommodate different play environments and skill levels. The speed switch is located on the underside of the mouse. Choose between normal speed for precise movements or hyper speed for faster navigation.

Mantenimiento

Limpieza

To clean the Robot Mouse and activity tiles, wipe them with a soft, damp cloth. Do not immerse the mouse in water or use harsh cleaning agents.

Cuidado de la batería

• Always use fresh batteries of the recommended type (3 AAA).
• No mezcle baterías viejas y nuevas, o diferentes tipos de baterías.
• Retire las baterías si el juguete no se utilizará durante un período prolongado para evitar fugas.

Solución de problemas

El ratón no responde

• Asegúrese de que el interruptor de encendido esté en la posición "ENCENDIDO".
• Compruebe que las baterías estén correctamente instaladas y tengan suficiente carga. Reemplácelas si es necesario.
• Press the yellow 'Clear' button to clear any previous program, then re-enter your commands.

Mouse Not Following Path Correctly

• Verify that the programmed sequence of directional buttons matches the intended path.
• Ensure the play surface is flat and free of debris that might obstruct the mouse's movement.
• If using activity tiles, ensure they are securely connected and laid flat.

Presupuesto

Garantía y soporte

This product is provided with no manufacturer warranty. For any questions or support regarding the Learning Resources Code & Go Robot Mouse, please refer to the contact information provided on the product packaging or visit the official Learning Resources websitio.