RegistroTag TRED30-16R Vaccine Monitoring Kit

Introducción

El registroTag TRED30-16R Temperature Logger is designed for precise temperature monitoring, especially for vaccine storage. It measures and stores up to 15,900 temperature readings within a range of -40°C to +99°C (-40°F to +210°F) using an external probe. The device features a display that indicates temperature excursions for the current day and the previous 29 days, along with current temperature, time, recording status, and battery status. It is VFC compliant and includes an audible alarm for out-of-range conditions.

Key features include simple setup and data download (requires LTI-USB Docking Station), CDC VFC compliance, versatile configuration for fridge or freezer environments, an audible alert system, and double assurance with a 2-year calibration certificate and a 2-year device warranty.

Esta imagen muestra el registroTag TRED30-16R temperature data logger connected to an external probe, which is inserted into a glycol buffer bottle. The logger displays temperature readings and operational status.

Información de seguridad

Always handle the device with care. Do not expose the logger to extreme physical shock or moisture beyond its specified operating conditions. Ensure batteries are inserted correctly. Keep out of reach of children. This device is intended for professional use in monitoring temperature-sensitive products.

Contenido del paquete

Al desembalar, verifique que estén incluidos los siguientes elementos:

• RegistroTag TRED30-16R Data Logger
• 3” Stainless, 1/8”OD Probe with 5’ sensor cable (P/N SSP-0615)
• High Density plastic (shatter proof) glycol buffer bottle (P/N SPB1019)
• Acrylic stand (P/N AS1031)
• Installation/Mounting Kit (includes wall mounting bracket) (P/N IMK1015)
• Manual de instrucciones
• Battery (1 CR2032 battery required, may not be pre-installed)
• 2-Year NIST Traceable Certificate of Calibration (compliant to ISO/IEC 17025:2005)

Configuración

1. Instalación de la batería: Open the battery compartment and insert one CR2032 battery, observing polarity.
2. Conectar sonda: Securely connect the external temperature probe to the logger.
3. Posicionamiento: Place the logger and the glycol buffer bottle with the probe inside the refrigerator or freezer. Use the acrylic stand and mounting kit as needed to ensure stable placement.
4. Software & Docking Station: El registroTag TRED30-16R requires an LTI-USB Docking Station (sold separately) and LogTag Analyzer software for initial configuration, starting, and downloading data. Install the LogTag Software analizador en su computadora.
5. Configuracion inicial: Connect the logger to the LTI-USB Docking Station. Use the LogTag Analyzer software to configure logging parameters, alarm limits, and to specify whether the device is monitoring a fridge or freezer environment. This step is crucial for VFC compliance.

This video demonstrates the features and provides a 360-degree view of the LogTag TRED30-16R Vaccine Monitoring Kit. It highlights the device's design, components, and key functionalities for tracking and recording temperature data.

Instrucciones de funcionamiento

Inicio de una sesión de grabación

• Connect the logger to the LTI-USB Docking Station.
• Use the LogTag Analyzer software to initiate a new recording session.
• Alternatively, if configured for button-start, press and hold the 'START CLEAR STOP' button until the 'REC' indicator appears on the display.

Comprender la pantalla

• The display shows the current temperature, time, recording status (REC), and battery status.
• A checkmark (✓) indicates normal operation. An 'X' (✗) indicates an alarm condition.
• Day markers appear for days with temperature excursions.

Reviewing Marks

• Press the 'REVIEW MARK' button to cycle through recorded inspection marks or alarm events.

Borrado de alarmas

• If an alarm is triggered (indicated by 'X' and audible alert), press the 'START CLEAR STOP' button to silence the audible alarm and clear the alarm status indicator. The day marker will remain to indicate an excursion occurred.

Cómo detener una sesión de grabación

• Connect the logger to the LTI-USB Docking Station.
• Use the LogTag Analyzer software to stop the recording.
• Alternatively, if configured for button-stop, press and hold the 'START CLEAR STOP' button until the 'REC' indicator disappears.

Descarga de datos

• Connect the logger to the LTI-USB Docking Station.
• Abrir registroTag Analyzer software and follow the prompts to download the recorded temperature data for analysis and reporting.

Mantenimiento

Reemplazo de batería

When the battery status indicator shows low power, replace the CR2032 battery. Ensure the device is not actively recording before replacement.

Limpieza

Limpie el dispositivo y la sonda con un paño suave.amp cloth. Do not use abrasive cleaners or immerse the device in liquids.

Calibración

The TRED30-16R comes with a 2-year NIST Traceable Certificate of Calibration. Regular re-calibration is recommended to ensure continued accuracy, especially for critical applications like vaccine monitoring. Contact LogTag or an authorized service provider for re-calibration services.

Solución de problemas

Device Not Starting/Recording

• Verifique la instalación y carga de la batería.
• Ensure the device is properly connected to the LTI-USB Docking Station and recognized by LogTag Software analizador.
• Verify configuration settings in LogTag Analizador.

Lecturas de temperatura inexactas

• Ensure the probe is correctly positioned within the glycol buffer bottle and the monitored environment.
• Check for any physical damage to the probe or cable.
• Consider re-calibration if readings are consistently off compared to a known reference thermometer. Note that initial calibration accuracy can vary, and verification with reference thermometers is recommended.

Audible Alarm Not Sounding

• Check if the audible alarm feature is enabled in the LogTag Analyzer software configuration.
• Asegúrese de que la batería tenga suficiente energía.

Data Download Issues

• Verify the LTI-USB Docking Station is correctly connected to the computer and the logger.
• Ensure LogTag El software del analizador está actualizado.
• Check USB port functionality.

Presupuesto

Información de garantía

El registroTag TRED30-16R Vaccine Monitoring Kit includes a 2-year device warranty from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims, please contact your vendor or LogTag support with your proof of purchase.

Apoyo

For further assistance, technical support, or information regarding LogTag Analyzer software, please refer to the official LogTag website or contact your product supplier. An LTI-USB Docking Station is required for full device functionality, including setup, data download, and advanced configuration.