1. Introducción
This manual provides essential information for the installation, operation, and maintenance of your Genuine Ford ET4Z-19G490-A Rear View Camera Assembly. This component is an Original Equipment Manufacturer (OEM) part, designed and manufactured to Ford standards for specific vehicle models. Please read this manual thoroughly before proceeding with installation or use.
2. Información de seguridad
- Desconecte siempre la batería del vehículo antes de comenzar cualquier trabajo eléctrico para evitar descargas eléctricas o daños a los sistemas del vehículo.
- Asegúrese de que todas las conexiones estén seguras y adecuadamente aisladas para evitar cortocircuitos.
- Refer to your vehicle's service manual for specific wiring diagrams and component locations.
- If you are not comfortable performing the installation, seek assistance from a qualified automotive technician.
- La parte trasera view camera is an aid and does not replace the driver's responsibility to check surroundings and mirrors before backing up.
3. Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- 1x Ford ET4Z-19G490-A Camera Assembly
If any parts are missing or damaged, do not proceed with installation. Contact your supplier for assistance.
Figure 3.1: Packaging label indicating the ET4Z-19G490-A camera assembly.
4. Instalación
Installation of the Ford ET4Z-19G490-A camera assembly typically involves replacing an existing camera unit. Due to variations in vehicle models and trim levels, specific installation steps may differ. It is highly recommended to consult your vehicle's official service manual or reputable online resources for detailed, vehicle-specific instructions.
Pasos generales de instalación:
- Preparación: Estacione el vehículo en una superficie nivelada, ponga el freno de estacionamiento y apague el motor. Desconecte el terminal negativo de la batería del vehículo.
- Acceso: Gain access to the existing camera assembly. This often requires removing interior trim panels, tailgate components, or exterior emblems, depending on your vehicle model.
- Disconnect Old Camera: Carefully disconnect the electrical connector and any mounting hardware securing the old camera.
- Install New Camera: Position the new Ford ET4Z-19G490-A camera assembly into the mounting location. Ensure proper orientation (lens facing outwards and downwards for rear view). Secure it with the appropriate mounting hardware.
Figura 4.1: Lado view of the camera assembly, highlighting the connector.
Figura 4.2: Frente view de la lente de la cámara.
Figura 4.3: Posterior view of the camera assembly with identification label.
- Conectar el cableado: Connect the vehicle's wiring harness to the camera's RCA connector. Ensure the connection is firm.
- Funcionalidad de prueba: Before reassembling all trim, reconnect the vehicle's battery. Turn the ignition to the 'ON' position (without starting the engine) and shift the transmission into 'REVERSE'. Verify that the camera image appears correctly on your vehicle's display monitor.
- Reensamblaje: Once functionality is confirmed, reassemble all removed trim panels and components.
5. Instrucciones de funcionamiento
The Ford ET4Z-19G490-A Rear View Camera Assembly operates automatically in conjunction with your vehicle's transmission system.
- When the vehicle's transmission is shifted into 'REVERSE', the camera will activate.
- The live video feed from the camera will be displayed on your vehicle's compatible monitor.
- Depending on your vehicle's configuration, dynamic or static guidance lines may appear on the display to assist with parking and maneuvering.
- The camera will deactivate when the transmission is shifted out of 'REVERSE'.
6. Mantenimiento
Para garantizar un rendimiento óptimo y la longevidad de su parte trasera view camera, follow these simple maintenance guidelines:
- Limpieza de lentes: Limpie periódicamente la lente de la cámara con un paño suave.amp cloth to remove dirt, dust, and debris. Avoid abrasive cleaners or materials that could scratch the lens.
- Verificación de conexión: If accessible, occasionally check the electrical connections to ensure they remain secure and free from corrosion.
- Factores ambientales: Extreme temperatures, heavy rain, or snow can temporarily affect camera performance. Ensure the lens is clear of ice or snow before use.
7. Solución de problemas
If you experience issues with your Ford ET4Z-19G490-A Rear View Camera, refer to the following troubleshooting guide:
| Problema | Posible causa | Solución |
|---|---|---|
| No se muestra ninguna imagen cuando está en reversa. | Conexión eléctrica suelta. Fusible quemado. Faulty camera unit. | Check all electrical connections to the camera and display. Inspect vehicle's fuse box for a blown fuse related to the camera or display. If connections and fuses are good, the camera may require replacement. |
| La imagen está borrosa o distorsionada. | Lente de cámara sucia. Humedad dentro de la lente. Damaged camera unit. | Limpie la lente de la cámara con un paño suave.amp paño. Allow time for any condensation to dissipate. If persistent, the seal may be compromised. If cleaning does not resolve the issue, the camera may be damaged. |
| Image is upside down or incorrect orientation. | Incorrect camera model for vehicle. Instalación incorrecta. | Verify that the ET4Z-19G490-A is the correct part number for your specific vehicle model and year. Ensure the camera is installed with the correct orientation as per vehicle service manual. |
If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified automotive technician or contact Ford customer support.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | ET4Z-19G490-A |
| Fabricante | Vado |
| Nombre del tipo de artículo | CAMERA ASY |
| Dispositivos compatibles | Monitor |
| Tipo de instalación | Montaje en superficie |
| Tecnología de sensores ópticos | CMOS |
| Tipo de lente | Gran angular, fijo |
| Tipo de conector | RCA |
| Formato de captura de video | MP4 |
| Resolución de captura de video | 720p |
| Peso del artículo | 16 onzas (aprox. 0.45 kg) |
9. Garantía y soporte
This Genuine Ford Part is covered by a limited warranty. For specific details regarding the warranty period, coverage, and claims process, please refer to the warranty documentation provided with your vehicle or contact an authorized Ford dealership or Ford customer service.
For technical support, installation assistance, or warranty inquiries, please contact your local authorized Ford dealership or visit the official Ford webSitio para recursos de atención al cliente.