Cabezal Armytek Wizard Pro v3 XHP50amp Manual de usuario

1. Producto terminadoview

The Armytek Wizard Pro v3 XHP50 is a versatile and durable headlamp designed for various activities, offering high brightness and advanced features. Its robust construction ensures reliability in challenging environments.

Image 1.1: Armytek Wizard Pro v3 XHP50 Headlamp. This image displays the headlamp in its compact form, highlighting its main body and head strap attachment points.

Características principales:

• Brillo constante: Achieved through powerful electronics and active temperature control.
• Diseño multifuncional: Suitable for various uses including automotive, fishing, hunting, home, work, and outdoor activities.
• Indicación de advertencia: Multicolor indicators for low battery level and high temperature.
• Ultra-low Current Drain: Ensures long standby time in OFF-state, exceeding 25 years.
• Construcción duradera: Solid body, impact-resistant from 10 meters, and total protection from water, dirt, and dust (operates at 10 meters depth).
• Fácil de usar: Side switch for comfortable one-hand operation and easy mode switching.
• Montaje versátil: Removable magnet in the tailcap, removable clip, and strong lanyard for multipurpose use.

2. Configuración y uso inicial

2.1. Instalación de la batería

1. Desenrosque la tapa trasera del cabezal.amp girándolo en sentido antihorario.
2. Inserte la batería de iones de litio 18650 incluida con el terminal positivo (+) orientado hacia el cabezal de la linterna.
3. Screw the tailcap back on clockwise until it is securely tightened. Ensure the tailcap is fully tightened to maintain water resistance.

2.2. Accesorio de diadema

La cabezaamp comes with a comfortable headband for secure fixation. Slide the headlamp into the silicone mount on the headband. Adjust the straps for a snug fit on your head.

2.3. Magnet and Clip Installation

• La cabezaamp features a removable magnet in the tailcap for attaching to metallic surfaces.
• A removable clip is also provided for attaching the headlamp to clothing or gear.

3. Instrucciones de funcionamiento

3.1. Encendido y apagado

• Encender: Presione el interruptor lateral una vez.
• Apagar: Mantenga presionado el interruptor lateral.

3.2. Mode Switching and Brightness Levels

The Wizard Pro v3 XHP50 offers multiple brightness levels and special modes, accessible via the side switch.

• Modos generales: Cycle through different brightness levels by pressing the side switch repeatedly while the light is on.
• Turbo Modes: Access higher brightness levels (Turbo1, Turbo2) for maximum output. These modes may generate significant heat.
• Strobe Modes: Special flashing modes (Strobe1, Strobe2, Strobe3) are available for signaling or emergency situations.

Output Levels and Runtimes:

• Turbo2: 2150 lumens (1 hour)
• Turbo1: 1250 lumens (1 hour 40 minutes)
• Main3: 500 lumens (4 hours 10 minutes)
• Main2: 210 lumens (10 hours 40 minutes)
• Main1: 40 lumens (50 hours)
• Firefly3: 7 lumens (12 days)
• Firefly2: 2 lumens (40 days)
• Firefly1: 0.25 lumens (200 days)
• Strobe3: 10Hz, Turbo2 (2 hours)
• Strobe2: 1Hz, Turbo2 (3.5 hours)
• Strobe1: 1Hz, Main2 (35 hours)

3.3. Warning Indications

La cabezaamp features multicolor warning indications for critical statuses:

• Batería baja: The indicator will change color or flash to signal a low battery level, prompting you to recharge or replace the battery.
• Temperatura alta: Si la cabezaamp reaches a high temperature, especially in Turbo modes, the indicator will warn you, and the brightness may automatically reduce to prevent overheating.

4. Mantenimiento

4.1. Limpieza

• Limpiar el cabezalamp cuerpo con un suave, damp paño.
• Limpie la lente suavemente con un paño de microfibra para evitar rayones.
• Periodically clean the threads of the tailcap and apply silicone grease to maintain water resistance.

4.2. Cuidado de la batería

• Use only recommended 18650 Lithium-Ion batteries.
• Cargue las baterías completamente antes de almacenarlas durante un período prolongado.
• Retire la batería si el cabezalamp will not be used for a prolonged period to prevent drain.

4.3. Resistencia al agua

The Armytek Wizard Pro v3 XHP50 is designed to be waterproof, dirt, and dust resistant, functioning even at a depth of 10 meters. Ensure the tailcap is always fully tightened to maintain this protection.

5. Solución de problemas

5.1. cabezaamp No enciende

• Comprobar la batería: Asegúrese de que la batería esté insertada correctamente con el terminal positivo (+) orientado hacia la cabeza.
• Carga de la batería: Verify the battery is charged. Try charging it or using a freshly charged battery.
• Tailcap Connection: Make sure the tailcap is fully tightened. A loose tailcap can prevent electrical contact.
• Contactos limpios: Inspect battery contacts and threads for dirt or corrosion. Clean if necessary.

5.2. cabezaamp Hace demasiado calor

• La cabezaamp features active temperature control. In high output modes (e.g., Turbo), it is normal for the device to generate heat.
• If the temperature becomes excessive, the headlamp will automatically reduce its brightness to prevent damage.
• Consider switching to a lower brightness mode if prolonged high output is not required.

5.3. Reduced Brightness or Short Runtime

• Estado de la batería: The battery may be old or damaged. Replace with a new, high-quality 18650 Lithium-Ion battery.
• Cargando: Asegúrese de que la batería esté completamente cargada antes de usarla.

6. Especificaciones

7. Garantía y soporte

Armytek products are designed for reliability and durability. For specific warranty terms and conditions, please refer to the official Armytek websitio o la tarjeta de garantía incluida con su producto.

If you encounter any issues or require technical assistance, please contact Armytek customer support. You can find contact information on the official Armytek websitio o a través del minorista donde compró el producto.

For more information about Armytek products, visit the official store: Armytek Store