Introducción
This manual provides essential information for the safe installation, operation, and maintenance of your Heathco HZ-5846-WH Motion Activated LED Security Light. This fixture is designed to provide reliable outdoor lighting with energy-efficient LED technology and motion detection capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Image: Heathco HZ-5846-WH Motion Activated LED Security Light, showing the two adjustable lamp heads and the motion sensor below.
Información de seguridad
ADVERTENCIA: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- Este producto debe ser instalado por un electricista calificado.
- Asegúrese de que el volumen de suministrotage is 120 VAC, 60 Hz.
- No intente desmontar ni modificar el dispositivo. No contiene piezas que el usuario pueda reparar.
- Avoid looking directly into the LED light source when illuminated, as this may cause eye damage.
- Mount the fixture securely to a structural surface.
Configuración e instalación
The Heathco HZ-5846-WH security light is designed for either wall mount or eave mount installation. Ensure the mounting location provides adequate coverage for the desired detection area and is within reach of the electrical supply.
Pasos de instalación:
- Desconexión de energía: Desconecte la energía en el disyuntor o en la caja de fusibles antes de comenzar la instalación.
- Ubicación de montaje: Select a suitable wall or eave location. The fixture should be mounted at a height that allows for optimal motion detection and light coverage.
- Alambrado: Connect the fixture's wires to the household wiring according to local electrical codes. Typically, this involves connecting the black wire to live, white wire to neutral, and green/bare copper wire to ground.
- Accesorio seguro: Mount the fixture securely to the junction box or mounting surface using the provided hardware.
- Ajustar Lamp Cabezales y sensores: El lamp heads and motion sensor are tool-free adjustable. Position them to cover the desired area.
- Restauración de energía: Una vez completada la instalación y todas las conexiones estén seguras, restablezca la energía en el disyuntor.
Instrucciones de funcionamiento
Your Heathco HZ-5846-WH security light features a 180-degree motion detection zone and adjustable settings for optimal performance.
Ajuste del sensor de movimiento:
- Rango: The motion sensor can detect movement up to 40 feet. Adjust the sensor's angle to modify the detection range and area. Avoid pointing the sensor at heat sources or moving objects (e.g., trees, traffic) that could cause false triggers.
- A tiempo: The light-on time can be adjusted up to 5 minutes. Use the control dial (if present, typically on the sensor unit) to set how long the light remains illuminated after motion is detected.
Anulación manual:
This fixture includes a manual override function. To activate the manual override, quickly turn the light switch OFF then ON. The light will remain ON continuously. To return to motion-activated mode, quickly turn the light switch OFF then ON again. The light will then operate based on motion detection.
Mantenimiento
The Heathco HZ-5846-WH security light utilizes energy-saving LED technology, meaning you will never need to change a bulb.
- Limpieza: To maintain the appearance and performance of your fixture, periodically clean the lens and housing with a soft, damp Paño. No utilice limpiadores abrasivos ni disolventes.
- Inspección: Inspeccione periódicamente la luminaria para detectar cualquier daño o conexión suelta. Si detecta algún problema, desconecte la alimentación y consulte a un electricista cualificado.
Solución de problemas
Si su luz de seguridad no funciona como se espera, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No power; faulty wiring; sensor not detecting motion. | Check circuit breaker; verify wiring connections; adjust sensor angle and range. |
| La luz permanece encendida continuamente. | Manual override activated; constant motion in detection zone; faulty sensor. | Toggle power switch to reset manual override; reposition sensor; contact support if sensor is faulty. |
| Light turns ON/OFF frequently. | Sensor detecting unwanted motion (e.g., trees, traffic, animals). | Adjust sensor angle and sensitivity to exclude unwanted motion sources. |
| El rango de detección es pobre. | Sensor obstruido o apuntado incorrectamente. | Clear obstructions; adjust sensor angle for optimal coverage. |
Si los pasos de solución de problemas no resuelven el problema, comuníquese con el servicio de atención al cliente.
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | HZ-5846-WH |
| Marca | Globo Eléctrico |
| Fuente de luz | LED integrado |
| Brillo | 1250 lúmenes |
| Temperatura de color | 5296 Kelvin |
| Quétage | 13.73 vatios |
| Ángulo de detección de movimiento | 180 grados |
| Rango de detección de movimiento | Hasta 40 pies |
| Adjustable On-Time | Hasta 5 minutos |
| Fuente de poder | Eléctrico con cable (120 VCA, 60 Hz) |
| Material | Polycarbonate (Shade), Metal (Fixture) |
| Tipo de montaje | Wall Mount or Eave Mount |
| Nivel de resistencia al agua | Impermeable |
| Dimensiones (L x An x Al) | 7.54" x 6.79" x 6.22" |
| Peso del artículo | 1.9 libras |
| Código Postal | 016963158467 |
Image: Dimensions of the Heathco HZ-5846-WH security light, showing length (7.54"), width (6.79"), and height (6.22").
Garantía y soporte
Información de garantía:
The manufacturer warranty description for this product is No aplicableConsulte la política de devoluciones de su minorista para obtener detalles sobre devoluciones o cambios.
Atención al cliente:
For further assistance, technical support, or inquiries regarding your Heathco HZ-5846-WH Motion Activated LED Security Light, please contact Globe Electric customer service. Refer to the product packaging or the Globe Electric webSitio para obtener información de contacto actualizada.