1. Producto terminadoview
The KOKKO FCP2 Compressor Guitar Pedal is a mini effect processor featuring a fully analog circuit and true bypass. Designed for both guitar and bass, it offers a broader adjustable range for compression effects. Its compact size and durable aluminum alloy construction make it suitable for various setups.
Figure 1: KOKKO FCP2 Compressor Guitar Pedal
Contenido del paquete:
- 1 x KOKKO FCP2 Compressor Guitar Effect Pedal
- 1 x Manual de usuario (inglés)
2. Configuración
2.1 Fuente de alimentación
The KOKKO FCP2 pedal requires an external AC adapter (not included) delivering 9V DC regulated power with a minimum of 300mA. Ensure the adapter has a center-negative polarity. Connect the power adapter to the 'Power In' jack located at the top of the pedal.
Figura 2: Ubicación de la entrada de energía
2.2 Conexión a su instrumento y Ampmás vivaz
- Connect your guitar or bass to the 6.35mm Input jack on the right side of the pedal using a standard instrument cable.
- Connect the 6.35mm Output jack on the left side of the pedal to your amplifier or other effects pedals using another standard instrument cable.
- Ensure all connections are secure before powering on the pedal.
Figura 3: Conexiones de entrada y salida
3. Instrucciones de funcionamiento
The KOKKO FCP2 Compressor pedal features three control knobs and a footswitch for activation.
Figure 4: Pedal Controls
3.1 Controles
- Perilla SUSTAIN: Controls the amount of compression applied to the signal. Turning it clockwise increases sustain and compression.
- Perilla de NIVEL: Adjusts the overall output volume of the pedal. Use this to match the volume of your compressed signal to your bypassed signal, or to provide a boost.
- Perilla de ATAQUE: Determines how quickly the compressor reacts to the initial transient of your notes. A lower attack setting (counter-clockwise) allows more of the initial pick attack to pass through before compression engages, resulting in a punchier sound. A higher attack setting (clockwise) compresses the initial attack more quickly, leading to a smoother, more even tone.
- Pedal: Activa o desactiva el efecto.
- Indicador LED: Se ilumina cuando el efecto está activo.
3.2 Funcionamiento básico
- After connecting the pedal and power supply, press the footswitch to activate the effect. The LED indicator will light up.
- Start with the SUSTAIN and ATTACK knobs at a moderate position (e.g., 12 o'clock) and the LEVEL knob set to unity gain (where the effect on volume matches the bypassed volume).
- Adjust the SUSTAIN knob to achieve the desired amount of compression and sustain.
- Experiment with the ATTACK knob to fine-tune how the compressor responds to your playing dynamics.
- Use the LEVEL knob to adjust the overall output volume to your preference.
4. Mantenimiento
To ensure the longevity and optimal performance of your KOKKO FCP2 Compressor pedal, follow these maintenance guidelines:
- Clean the pedal regularly with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Keep the pedal free from dust and debris.
- Guarde el pedal en un lugar fresco y seco cuando no esté en uso.
- Do not attempt to disassemble the pedal yourself, as this may void the warranty and cause damage.
5. Solución de problemas
If you encounter issues with your KOKKO FCP2 Compressor pedal, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| No hay sonido cuando el pedal está pisado. | Incorrect power supply, loose cables, pedal bypassed. | Ensure 9V DC center-negative power supply is connected. Check all instrument cables are securely plugged in. Press footswitch to engage effect (LED should light up). |
| Sonido débil o distorsionado. | Incorrect knob settings, faulty cables. | Adjust LEVEL, SUSTAIN, and ATTACK knobs. Test with different cables. |
| El LED no se enciende. | Sin energía, LED defectuoso. | Verify power supply connection and specifications. If power is confirmed, the LED may be faulty (contact support). |
| Ruido o zumbido excesivo. | Bucle de tierra, interferencia, fuente de alimentación defectuosa. | Use a high-quality, isolated power supply. Ensure all equipment is properly grounded. Try moving the pedal away from other electronic devices. |
6. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | COCO |
| Modelo | FCP2 COMPRESSOR (Mini) |
| Material principal | Aleación de aluminio |
| Impedancia de entrada | 1M Ohms |
| Impedancia de salida | 10K ohmios |
| Fuente de alimentación | External AC adapter 9V DC regulated, minimum 300mA (center negative) |
| Tamaño del artículo | 9.4 cm x 5.1 cm x 5.3 cm (3.7 x 2.01 x 2.09 pulgadas) |
| Peso del artículo | 180 g (6.3 onzas) |
| Formato de señal | Cosa análoga |
| Efectos de salida de audio | Compresión |
| Tipo de controles | Perilla |
| Tipo de conector | Barrel Connector (Power) / 1/4-inch Audio (Input/Output) |
Figure 5: Pedal Dimensions
7. Garantía
The KOKKO FCP2 Compressor Guitar Pedal comes with a 1-year warranty. Please retain your purchase receipt for warranty claims. For detailed warranty terms and conditions, please refer to the official KOKKO websitio o póngase en contacto con el servicio de atención al cliente.
8. Notas de seguridad importantes
- Do not use the pedal in high temperature, high humidity, or subzero environments.
- Avoid using the pedal in direct sunlight.
- Do not disassemble the pedal yourself.
- Conserve este manual para futuras consultas.