Lepro 11-inch 24W Flush Mount LED Ceiling Light User Manual

1. Información de seguridad

Lea atentamente todas las instrucciones antes de instalar y usar el producto. Conserve este manual para futuras consultas.

• Seguridad eléctrica: Always turn off the power at the circuit breaker before beginning any electrical work. Ensure proper grounding. If you are unsure about electrical installations, consult a qualified electrician.
• Uso exclusivo en interiores: This fixture is designed for indoor use.
• Resistencia al agua: The light fixture has an IP54 water-resistant and dustproof rating, making it suitable for damp locations like bathrooms and kitchens. However, it is not designed for direct water immersion.
• No regulable: This LED ceiling light is no regulable. Do not connect it to a dimmer switch, as this may damage the fixture.
• Calor: Si bien las luces LED producen menos calor que las bombillas tradicionales, asegúrese de que haya una ventilación adecuada alrededor del dispositivo.
• Niños: Keep packaging materials away from children to avoid danger of suffocation.

2. Producto terminadoview

The Lepro 11-inch Flush Mount LED Ceiling Light provides efficient and bright illumination for various indoor spaces. Its slim design integrates seamlessly with modern interiors.

• Modelo: PR1500035-WW
• Tamaño: 11 inches (28 cm) diameter, 1.97 inches (5 cm) height.
• Fuerza: 24 vatios
• Brillo: 2400 lúmenes
• Temperatura de color: 3000 Kelvin (Soft Warm White)
• Resistencia al agua: IP54 (resistente al agua y al polvo)
• Esperanza de vida: Más de 20,000 horas
• Material: Plástico
• IRC: >80 (Color Rendering Index)
• Equivalente: Approximately 200W incandescent equivalent.
• Eficiencia Energética: Saves up to 88% on energy compared to traditional lighting.

Figure 2.1: The Lepro 11-inch LED Ceiling Light providing warm and cozy illumination in a living room setting.

Figure 2.2: The ceiling light illuminating a modern kitchen, showcasing its broad light distribution.

Figure 2.3: The IP54 waterproof design makes this light suitable for bathroom environments.

Figure 2.4: The 24W LED light offers significant energy savings compared to two 100W incandescent bulbs.

Figure 2.5: Product dimensions showing 11-inch diameter and 1.97-inch height, ideal for low ceilings.

3. Guía de instalación

Follow these steps for safe and proper installation of your Lepro LED Ceiling Light. Ensure power is off before starting.

1. Apague la energía: Localice el disyuntor que controla la lámpara y apague la corriente. Verifique que la corriente esté apagada usando un voltimetro.tage probador.
2. Remove Mounting Bracket: Gently pull the spring tabs on the light fixture and remove the mounting bracket from the back of the lamp cuerpo.
3. Measure Hole Spacing: Use the removed mounting bracket to measure the appropriate hole spacing for your ceiling type. The bracket supports a minimum distance of 2.7 inches and a maximum distance of 4 inches for mounting holes.
4. Instale el soporte de montaje:
   • Para techo de madera: Use the provided screws to directly fix the mounting bracket to the wooden ceiling.
   • For Cement Ceiling: Drill two holes at the measured spacing, insert the plastic anchors, then fix the mounting bracket with screws.
   • Para caja de conexiones: Align the mounting bracket with the existing holes on your junction box and secure it with the provided screws.
5. Preparar el cableado: Open the waterproof wiring compartment on the light fixture.
6. Conectar cables: Insert the household electrical wires into the electrical connections labeled 'N' (Neutral) and 'L' (Live) on the fixture. Ensure a secure connection.
7. Cableado seguro: Straighten out the wires, place the rubber sealant into position, and close the wiring compartment securely.
8. Monte el Lamp: Align the light fixture with the installed mounting bracket. Pull the lamp's spring tabs and latch it onto the bracket, pushing the light firmly against the ceiling until it clicks into place.
9. Restaurar energía: Vuelva a encender la energía en el disyuntor.

Figure 3.1: Visual guide for installing the ceiling light, showing bracket removal, wire connection, and final mounting.

4. Instrucciones de funcionamiento

This Lepro LED Ceiling Light is designed for simple operation.

• Encendido/apagado: Utilice un interruptor de pared estándar para encender o apagar la lámpara.
• No regulable: As noted in the safety information, this fixture is not dimmable. It will operate at full brightness when switched on.

5. Mantenimiento

The Lepro LED Ceiling Light requires minimal maintenance due to its integrated LED design and durable construction.

• Limpieza: Asegúrese de que la alimentación esté apagada antes de limpiarla. Limpie el dispositivo con un paño suave, seco o ligeramente húmedo.amp paño. No utilice productos químicos agresivos ni limpiadores abrasivos.
• Sin reemplazo de bombilla: The LED lights are integrated and designed to last over 20,000 hours, eliminating the need for bulb replacement.
• Inspección: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified professional.

6. Solución de problemas

If you encounter issues with your Lepro LED Ceiling Light, refer to the following common troubleshooting steps:

7. Especificaciones

8. Garantía y soporte

This Lepro LED Ceiling Light comes with a 2 año de garantía del fabricante.

For further assistance, product information, or to explore other Lepro products, please visit the official Lepro Store:

Visita la tienda Lepro