Uno para todos SV1770

One For All SV1770 Bluetooth Audio Transmitter User Manual

Model: SV1770 | Brand: One For All

Introducción

The One For All SV1770 Bluetooth Audio Transmitter provides a wireless solution for transmitting audio from your television or other audio sources to Bluetooth-enabled headphones. This device allows for private listening without disturbing others and supports simultaneous connection for up to two pairs of headphones. It incorporates aptX technology for enhanced sound quality and is conveniently powered via USB.

Contenido del paquete

Por favor verifique que todos los artículos estén presentes en el paquete:

  • One For All SV1770 Bluetooth Audio Transmitter unit
  • cable de audio estéreo de 3.5 mm
  • RCA audio cable (red/white)
  • Cable de alimentación USB
One For All SV1770 Bluetooth Audio Transmitter and included accessories

Image: The One For All SV1770 Bluetooth Audio Transmitter shown with its included accessories, which are a 3.5mm audio cable, an RCA audio cable, and a USB power cable.

Configuración

Connecting the Transmitter to Your TV/Audio Source

The SV1770 can be connected to your TV or audio source using either the 3.5mm audio output or the RCA audio outputs.

  1. Conexión de energía: Connect the USB power cable from the transmitter to a free USB port on your TV or a USB power adapter (not included). The transmitter requires 5V USB power.
  2. Conexión de audio (3.5 mm): If your TV or audio source has a 3.5mm headphone jack, connect one end of the 3.5mm stereo audio cable to the transmitter's 3.5mm input and the other end to the TV's headphone jack.
  3. Audio Connection (RCA): If your TV or audio source has RCA audio output ports (typically red and white), connect the RCA audio cable to these ports and the other end to the transmitter's RCA input.
One For All SV1770 Bluetooth Audio Transmitter connected to a TV

Image: The SV1770 Bluetooth Audio Transmitter is shown connected to the rear of a television, utilizing both RCA audio cables for sound input and a USB port for power.

Emparejamiento con auriculares Bluetooth

Follow these steps to pair your Bluetooth headphones with the SV1770 transmitter:

  1. Ensure the SV1770 transmitter is powered on. The LED indicator will show its status.
  2. Put your Bluetooth headphones into pairing mode. Refer to your headphone's instruction manual for specific instructions.
  3. Press and hold the pairing button on the SV1770 transmitter for approximately 3 seconds until the LED indicator flashes rapidly, indicating it is in pairing mode.
  4. Place the headphones close to the transmitter. The devices should automatically connect. Once connected, the LED indicator on the transmitter will change to a steady blue light.
  5. To connect a second pair of headphones, repeat steps 2-4. The transmitter can support up to two pairs of headphones simultaneously.

Instrucciones de funcionamiento

Transmisión de audio

Once successfully paired, audio from your connected TV or audio source will be transmitted wirelessly to your Bluetooth headphones.

Control de volumen

Volume control is typically managed directly on your Bluetooth headphones. The transmitter does not have independent volume controls.

Reconectando

After initial pairing, the transmitter and headphones should automatically reconnect when both devices are powered on and within range. If they do not reconnect, briefly press the pairing button on the transmitter to initiate reconnection.

Mantenimiento

  • Mantenga el transmisor limpio limpiándolo con un paño suave y seco.
  • Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
  • No intente abrir o reparar el dispositivo usted mismo, ya que esto anulará la garantía.

Solución de problemas

ProblemaSolución
No hay sonido en los auriculares.
  • Ensure the transmitter is powered on and the LED indicator is solid blue.
  • Verify that the headphones are paired and connected to the transmitter.
  • Check the audio cable connection between the transmitter and the TV/audio source.
  • Confirm the TV's audio output is active and not muted.
  • Increase the volume on your headphones.
Cannot pair headphones.
  • Ensure both the transmitter and headphones are in pairing mode (flashing LED).
  • Acerque los auriculares al transmisor.
  • Apague otros dispositivos Bluetooth cercanos para evitar interferencias.
  • Try resetting both the transmitter and headphones (refer to their respective manuals).
Poor audio quality or dropouts.
  • Ensure the transmitter and headphones are within the 10-meter range.
  • Minimizar los obstáculos (paredes, objetos grandes) entre los dispositivos.
  • Check for sources of interference (Wi-Fi routers, microwaves).
  • Verifique la calidad de la fuente de audio.

Presupuesto

  • Modelo: SV1770
  • Versión de Bluetooth: 3.0
  • Códecs Bluetooth: aptX, SBC
  • Alcance inalámbrico: Hasta 10 metros (33 pies)
  • Tipo de salida de audio: Bluetooth
  • Modo de salida de audio: Estéreo
  • Características de audio: Wolfson D/A converter, up to 24 bit 192 kHz
  • Interfaz de hardware: Bluetooth 3.0, USB 3.0 (for power)
  • Dispositivos compatibles: TV, stereo, any audio device with 3.5mm or RCA audio output
  • Fuente de energía: USB (5 V)
  • Dimensiones del producto: 17 x 4 x 1.6 cm
  • Peso: 31 gramos
  • Material: Policarbonato

Garantía y soporte

For warranty information and technical support, please refer to the official One For All webSitio web o contacte directamente con el servicio de atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.

Soporte en línea: Visita www.unoparatodos.com Para preguntas frecuentes, registro de productos y detalles de contacto.

Servicio al cliente: Consulte la información de contacto proporcionada en el embalaje de su producto o en el sitio web oficial. webSitio para soporte regional.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.