Casio PRG-650Y-1CR
Casio PRO TREK Solar Powered Silicone Watch User Manual
Model: PRG-650Y-1CR
Marca: Casio
Introducción
Your Casio PRO TREK PRG-650Y-1CR is a solar-powered watch designed for outdoor enthusiasts, featuring a Triple Sensor for bearing, altitude/barometric pressure, and temperature measurements. Its robust design and advanced functionalities make it suitable for various outdoor activities, especially in low-light conditions with its Neon Illuminator.
This manual provides detailed instructions on setting up, operating, and maintaining your PRO TREK watch to ensure optimal performance and longevity.
Figura 1: Frente view of the Casio PRO TREK PRG-650Y-1CR watch, showcasing its analog and digital display with a black dial and white hands.
Configuración
Initial Charging (Tough Solar)
Your PRO TREK watch is equipped with Tough Solar technology, converting light into energy to power the watch. For initial setup or after prolonged storage, ensure the watch is exposed to bright light for several hours to achieve a full charge. Avoid covering the watch face when charging.
- Place the watch in a location where it can receive direct sunlight or strong fluorescent light.
- Evite colocar el reloj en entornos extremadamente calientes durante la carga.
- A fully charged watch can operate for approximately 6 months without further light exposure under normal use, or up to 25 months in power-saving mode.
Configuración de la hora y la fecha
The watch automatically adjusts time and date based on its internal calendar. Manual adjustments may be necessary for specific time zones or if the watch has been without power for an extended period.
- Pull out the crown to the first click. The second hand will move to the current time zone city code.
- Rotate the crown to select your desired city code. The digital display will show the time for that city.
- Push the crown back in to set the time zone.
- For manual time adjustment, pull the crown out to the second click. The second hand will move to 12 o'clock.
- Use the buttons (usually A, B, C, D) to adjust hours, minutes, and date as indicated in the digital display. Refer to the specific button functions printed on the watch bezel or case for precise control.
- Push the crown back in to finalize the settings.
Figure 2: The watch comfortably worn on a wrist, demonstrating its size and fit.
Funciones operativas
The PRO TREK PRG-650Y-1CR features a Triple Sensor for environmental data and various timekeeping modes.
Funciones del triple sensor
Access these functions using the dedicated sensor buttons, typically labeled ALTI (Altimeter), BARO (Barometer), and COMP (Compass).
- Altímetro: Measures current altitude based on atmospheric pressure. Press the ALTI button to activate. The digital display will show the altitude.
- Barómetro: Displays atmospheric pressure, which can indicate weather trends. Press the BARO button to activate. The digital display will show the barometric pressure.
- Termómetro: Measures ambient temperature. For accurate readings, remove the watch from your wrist for at least 20-30 minutes to avoid body heat interference.
- Brújula digital: Determines magnetic north and displays bearing. Press the COMP button to activate. The second hand will point north, and the digital display will show the bearing in degrees.
Figure 3: Digital display showing an altitude reading in meters.
Figure 4: Digital display showing a compass bearing.
Timekeeping Modes
- Hora mundial: Muestra la hora actual en varias ciudades importantes alrededor del mundo.
- Cronógrafo: Mide el tiempo transcurrido con alta precisión.
- Contador regresivo: Cuenta regresivamente desde un tiempo preestablecido.
- Alarma: Establece alarmas diarias.
Neon Illuminator
The Neon Illuminator provides enhanced visibility in the dark. Press the light button (usually located on the side) to illuminate the analog hands and digital display with a bright, neon glow.
Figure 5: The watch face illuminated by the Neon Illuminator in a dark environment, highlighting the hands and hour markers.
Mantenimiento
Limpieza
La limpieza regular ayuda a mantener la apariencia y la funcionalidad de su reloj.
- Limpie el reloj con un paño suave y seco para eliminar la suciedad y la humedad.
- Para la suciedad difícil, utilice un cepillo suave y una solución de jabón suave, luego enjuague bien con agua fresca y seque por completo.
- Avoid using harsh chemicals or abrasive materials, as they can damage the watch's finish or seals.
Resistencia al agua
The PRG-650Y-1CR is water-resistant up to 100 meters (10 BAR). This means it is suitable for swimming and snorkeling, but not for scuba diving.
- Do not operate buttons or the crown while the watch is wet or submerged in water.
- Después de la exposición al agua salada, enjuague bien el reloj con agua dulce y séquelo por completo.
Solar Charging Care
To ensure continuous operation, expose the watch to light regularly. If the charge level drops too low, some functions may be disabled to conserve power.
Figura 6: Perfil lateralfile of the watch, showing the buttons and crown.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Watch not functioning or display is blank. | Carga de batería baja. | Exponga el reloj a una luz brillante durante varias horas para cargarlo. |
| Hora o fecha incorrecta. | Time zone not set correctly or manual adjustment needed. | Adjust time zone and time manually as described in the Setup section. |
| Sensor readings are inaccurate. | External factors (e.g., body heat for temperature), or sensor calibration needed. | For temperature, remove watch from wrist. For compass/altimeter, perform calibration as per advanced manual (not covered here). |
| Luminescent band not glowing. | Insufficient light exposure to the band. | Expose the watch band to bright light for a period to allow it to absorb light for luminescence. |
Presupuesto
- Número de modelo: PRG-650Y-1CR (also PRG-650Y-1)
- Case / Bezel Material: Resin / Stainless steel
- Material de la banda: Silicone (DURA-SOFT)
- Fuente de energía: Tough Solar (alimentado por energía solar)
- Resistencia al agua: 10 BAR (100 metros)
- Sensores: Triple Sensor (Altimeter, Barometer, Thermometer, Digital Compass)
- Iluminación: Neon Illuminator
- Dimensiones: Aproximadamente 1 x 1 x 1 pulgadas
- Peso: Aproximadamente 3.53 onzas
- Batería: 1 CR2 battery (included, for backup/specific functions)
Figure 7: A size guide illustrating various watch diameters for comparison.
Vídeos oficiales de productos
Casio Men's 'PRO TREK' Solar Powered Silicone Watch Overview
Este vídeo ofrece una visión generalview of the Casio PRO TREK Solar Powered Silicone Watch, highlighting its key features and design.
Vídeo de la marca Casio
This video showcases the Casio brand's commitment to durability and innovation, featuring various G-SHOCK and PRO TREK models in action.
Garantía y soporte
Casio provides a limited warranty for its products. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical support, service, or inquiries regarding your Casio PRO TREK watch, please visit the official Casio webSitio web o contacte con el departamento de atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.
Puede encontrar más información y recursos de apoyo en Tienda Casio en Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.