Introducción
Welcome to the user manual for your MI Basic 2 Bluetooth Speaker. This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your speaker to ensure optimal performance and longevity. Please read this manual carefully before using the product.
Imagen: Frente view of the MI Basic 2 Bluetooth Speaker, showcasing its compact, rectangular design and white finish.
Características del producto
- Up to 10 hours of playback (at 40% volume)
- Highly portable and easy to carry
- Micrófono integrado para llamadas telefónicas con manos libres.
- CVC-enabled noise reduction for clear communication
- Batería de polímero de litio 1200mAh incorporada
- Effective Bluetooth range up to 10 meters
- Bluetooth version V4.2 for stable connectivity
- Rated Power: 2.5W x 2 (Total 5W)
Contenido del paquete
- 1 x MI Basic 2 Bluetooth Speaker
- 1 x Manual de usuario
Guía de configuración
1. Carga del altavoz
Before first use, it is recommended to fully charge the speaker. Connect the speaker to a power source using a compatible Micro-USB charging cable (not included). The charging indicator light will illuminate during charging. A full charge typically takes approximately 40 minutes to 1 hour.
Imagen: Trasera view of the MI Basic 2 Bluetooth Speaker, highlighting the Micro-USB charging port and the AUX IN port. Ensure the charging cable is connected to the Micro-USB port for power.
2. Encendido / apagado
To power on the speaker, press and hold the Power button located on the top of the speaker until you hear an audible prompt or see the indicator light illuminate. To power off, press and hold the Power button again until the speaker shuts down.
Imagen: Arriba view of the MI Basic 2 Bluetooth Speaker, showing the circular Power button on the left and the elongated volume control buttons (+ and -) on the right.
3. Emparejamiento Bluetooth
Ensure the speaker is powered on and in pairing mode (indicated by a blinking blue light, if available). On your device (smartphone, tablet), enable Bluetooth and search for available devices. Select "MI Basic 2" from the list of devices. Once paired, the speaker will indicate a successful connection, and the indicator light will become solid blue. The effective Bluetooth range is up to 10 meters.
Image: The MI Basic 2 Bluetooth Speaker, illustrating its high-definition sound capability and up to 10 hours of playback on a single charge.
4. Conexión de entrada auxiliar
For devices without Bluetooth, you can connect an audio cable (not included) from your device's audio output to the AUX IN port on the back of the speaker. The speaker will automatically switch to AUX mode when a cable is detected.
Image: The MI Basic 2 Bluetooth Speaker, highlighting its support for AUX-in connectivity and its stylish matte frame design.
Instrucciones de funcionamiento
1. Reproducción de música
After successful Bluetooth pairing or AUX connection, start playing audio from your connected device. Use the volume buttons (+/-) on the top of the speaker to adjust the playback volume.
2. Llamadas telefónicas
When a call comes in while connected via Bluetooth, the speaker will ring. To answer a call, briefly press the Power button. To end a call, briefly press the Power button again. The integrated microphone allows for hands-free communication with CVC-enabled noise reduction.
Image: The MI Basic 2 Bluetooth Speaker, emphasizing its built-in microphone for calls and its lightweight, portable design.
Mantenimiento
Limpieza
Limpie el altavoz con un paño suave y seco. No utilice limpiadores abrasivos, alcohol ni otros disolventes químicos, ya que podrían dañar la superficie o los componentes internos.
Almacenamiento
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery periodically (e.g., every 3-6 months) to maintain its health and prolong its lifespan.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El altavoz no se enciende. | La batería está agotada. | Charge the speaker fully using a compatible Micro-USB cable. |
| No se puede emparejar con un dispositivo Bluetooth. | El altavoz no está en modo de emparejamiento o está demasiado lejos del dispositivo. | Ensure speaker is powered on and in pairing mode. Move your device closer to the speaker (within 10m). Turn Bluetooth off/on on your device and try again. |
| No hay sonido durante la reproducción. | El volumen es demasiado bajo o el dispositivo no está conectado correctamente. | Increase volume on both the speaker and the connected device. Re-establish Bluetooth connection or check the AUX cable connection. |
| La calidad de la llamada es mala. | Weak signal or excessive environmental noise. | Move closer to your phone. Reduce background noise for clearer communication. |
| Speaker moves due to vibrations at high volume. | High bass output on a smooth surface. | Place the speaker on a non-slip surface or a larger, stable area to prevent movement, especially at high volumes. |
Especificaciones técnicas
| Característica | Detalle |
|---|---|
| Modelo | Básico 2 |
| Tipo de altavoz | Exterior |
| Potencia nominal | 5 vatios (2.5 W x 2) |
| Tecnología de conectividad | Bluetooth V4.2 |
| Alcance de Bluetooth | Hasta 10 metros |
| Tipo de batería | Polímero de litio |
| Capacidad de la batería | 1200 mAh |
| Duración de la batería | Hasta 10 horas (al 40% del volumen) |
| Tiempo de carga | Approximately 40 minutes to 1 hour |
| Micrófono incorporado | Yes, with CVC noise reduction |
| Método de control | Tocar (botones) |
| Dimensiones (LxAnxAl) | 15.5 x 6 x 2.6 cm |
| Peso del artículo | 52 gramos |
| Color | Blanco |
| Componentes incluidos | 1 Bluetooth Speaker, 1 Manual |
Información de garantía
This MI Basic 2 Bluetooth Speaker comes with a Garantía de 6 meses from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. For warranty service, please contact customer support as detailed below.
Atención al cliente
For any questions, technical assistance, or warranty inquiries regarding your MI Basic 2 Bluetooth Speaker, please visit the official MI support website or contact their customer service hotline. Refer to the official MI webSitio para obtener la información de contacto y los recursos de soporte más actualizados.