Introducción
Thank you for choosing the Connect It CI-786 Flat Screen Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new wall mount. Please read these instructions thoroughly before installation and retain them for future reference.
Información importante de seguridad
- Capacidad de peso: Do not exceed the maximum weight capacity of 50 kg (110 lbs). Overloading can result in serious injury or damage to equipment.
- Tamaño de pantalla: This mount is designed for flat screens between 94 cm (37 inches) and 178 cm (70 inches).
- Tipo de pared: Ensure the mounting surface can safely support the combined weight of the mount and your display. Consult a professional if unsure.
- Instalación: Follow all installation steps carefully. Improper installation can lead to equipment failure and personal injury.
- Niños: Mantenga a los niños alejados durante la instalación. Las piezas pequeñas pueden suponer un peligro de asfixia.
Configuración e instalación
Before you begin, ensure you have all necessary tools and components. It is recommended that two people perform the installation.
1. Verify Package Contents
Check that all parts listed in the product packaging are present and undamaged. If any parts are missing or damaged, contact customer support.
2. Prepare the Wall Mount
Familiarize yourself with the components of the wall mount. The image below shows the assembled mount structure.
Imagen 1: Connect It CI-786 Wall Mount. This image displays the main components of the wall mount, including the wall plate, articulating arms, and TV mounting brackets, ready for installation.
3. Determine Mounting Location and VESA Compatibility
Select a suitable location on your wall. Ensure the wall is capable of supporting the weight. Check your TV's VESA pattern (the four holes on the back of your TV). This mount supports VESA patterns from 200x200 mm to 600x400 mm.
Imagen 2: Dimensional Diagram of Connect It CI-786 Wall Mount. This diagram illustrates the key dimensions of the mount, including VESA compatibility (min 200x200mm, max 600x400mm), wall distance (min 62mm, max 475mm), and rotational/tilt angles.
4. Monte la placa de pared
- Mark the desired drilling points on the wall using the wall plate as a template.
- Drill pilot holes. Use appropriate drill bits for your wall type (wood stud, concrete, brick).
- Secure the wall plate to the wall using the provided screws and anchors. Ensure it is level and firmly attached.
5. Attach TV Brackets to Display
- Coloque con cuidado el televisor boca abajo sobre una superficie suave y limpia.
- Attach the vertical TV brackets to the back of your display using the appropriate screws that match your TV's VESA pattern. Do not overtighten.
6. Hang Display on Wall Mount
- With assistance, carefully lift the display and hook the TV brackets onto the wall plate.
- Secure the TV to the mount using the locking mechanisms or screws as per the detailed instructions in the full manual.
Instrucciones de funcionamiento
The Connect It CI-786 wall mount offers various adjustment options for optimal viewEn.
- Rotación: The mount allows for a 360-degree rotation. Gently adjust the screen to your desired angle.
- Inclinación: The screen can be tilted up to 3 degrees. Loosen the tilt adjustment screws, set the desired angle, and retighten.
- Girar: The articulating arms allow the TV to swivel horizontally. Gently pull or push the screen to achieve the desired viewángulo de ing.
- Distancia a la pared: The mount can extend from a minimum of 6.2 cm (2.4 inches) to a maximum of 47.5 cm (18.7 inches) from the wall.
Mantenimiento
- Limpieza: Limpie el soporte con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
- Controles periódicos: Revise periódicamente todos los tornillos y conexiones para asegurarse de que permanezcan ajustados y seguros.
- Daño: If any part of the mount appears damaged, discontinue use and contact customer support.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El televisor no está nivelado | La placa de pared no está nivelada durante la instalación. | Adjust the leveling screws on the TV brackets if available, or re-install the wall plate ensuring it is level. |
| El soporte se siente flojo | Los tornillos no están completamente apretados o los anclajes de pared son insuficientes. | Check and tighten all mounting screws. Ensure appropriate anchors were used for your wall type. |
| Difficulty adjusting movement | Los tornillos de ajuste están demasiado apretados. | Loosen the relevant adjustment screws slightly to allow for movement, then retighten to secure position. |
Presupuesto
- Modelo: CI-786
- Material: Acero aleado
- Color: Negro
- Dispositivos compatibles: TV
- Tipo de montaje: Montaje en pared
- Tipo de movimiento: Rotational, Swivel, Tilt
- Capacidad máxima de peso: 50 kg (110 libras)
- Min Screen Size Compatibility: 94 cm (37 pulgadas)
- Max Screen Size Compatibility: 178 cm (70 pulgadas)
- Compatibilidad VESA: 200x200 mm a 600x400 mm
- Ángulo de rotación: 360 grados
- Ángulo de inclinación máximo: 3 grados
- Distance to Wall (Min): 6.2 cm (2.4 pulgadas)
- Distance to Wall (Max): 47.5 cm (18.7 pulgadas)
- Dimensiones del producto: 23 x 26.2 x 23 cm (folded); 6.23 kg
Garantía y soporte
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Connect It websitio. No intente reparar el producto usted mismo.