Giro Fixture Helmet User Manual

1. Introducción

Thank you for choosing the Giro Fixture Helmet. This manual provides essential information for the proper fitting, use, and maintenance of your helmet. Please read these instructions carefully before using your helmet to ensure maximum safety and comfort. This helmet is designed for cycling and offers protection against head injuries during falls.

2. Información de seguridad

ADVERTENCIA: No helmet can protect the wearer against all possible impacts. Serious injury or death may occur. For maximum protection, the helmet must be fitted and attached properly to the wearer's head in accordance with these instructions.

• Siempre use un casco cuando ande en bicicleta.
• Ensure the helmet fits snugly and is level on your head, covering your forehead.
• The chin strap must be securely fastened.
• Inspect your helmet regularly for damage. Replace immediately if damaged or after any impact, even if damage is not visible.
• No modifique el casco ni lo utilice para fines distintos al ciclismo.

3. Componentes

The Giro Fixture Helmet consists of the following key components:

• Concha exterior: Durable polycarbonate exterior.
• Impact Liner: Expanded Polystyrene (EPS) foam designed to absorb impact energy.
• Sistema de retención: Adjustable dial at the back for a secure fit.
• Chin Straps: Adjustable straps with a buckle for securing the helmet under the chin.
• Visera: Integrated visor for sun and debris protection.
• Puertos de ventilación: Multiple vents for airflow and cooling.
• Relleno: Internal padding for comfort and fit.

Figura 3.1: Frente view of the Giro Fixture Helmet, showing the outer shell, visor, and ventilation ports.

4. Configuración y ajuste

Proper helmet fit is crucial for safety. Follow these steps to ensure your helmet is correctly adjusted:

1. Position the Helmet: Place the helmet on your head so it is level and covers your forehead. The front edge should be about one or two finger-widths above your eyebrows.
   

   Figura 4.1: Lado view of the helmet, illustrating proper positioning on the head.

2. Adjust the Retention System: Locate the adjustable dial at the back of the helmet. Turn the dial clockwise to tighten the fit until the helmet feels snug but comfortable, without causing pressure points. Turn counter-clockwise to loosen.
   

   Figura 4.2: Posterior view of the helmet, highlighting the adjustable retention system dial.
3. Adjust the Chin Straps: Fasten the chin strap buckle. Adjust the straps so they form a "V" shape under your ears. The buckle should be centered under your chin. Tighten the chin strap so that no more than one or two fingers can fit between the strap and your chin.
   

   Figura 4.3: Interior view showing the chin straps and internal padding.

4. Verifique el ajuste: With the straps fastened, shake your head vigorously. The helmet should not shift significantly from side to side or front to back. If it moves, readjust the retention system and straps.

5. Funcionamiento y uso

Once properly fitted, your Giro Fixture Helmet is ready for use. Always ensure the helmet is securely fastened before beginning your ride.

• Wear the helmet for all cycling activities, regardless of distance or terrain.
• Avoid wearing anything under the helmet that could interfere with its fit or protective function.
• The visor helps shield your eyes from sun and debris.

6. Mantenimiento

El cuidado adecuado prolonga la vida útil de su casco y mantiene sus cualidades protectoras.

• Limpieza: Clean the helmet with a soft cloth, mild soap, and water only. Harsh chemicals, solvents, or petroleum-based products can damage the helmet's materials and compromise its integrity.
• Almacenamiento: Store the helmet in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid storing it in a hot car, as excessive heat can damage the EPS liner.
• Inspección: Regularly inspect the shell, straps, and retention system for any signs of wear, cracks, or damage.

7. Solución de problemas

If you encounter issues with your helmet, refer to the following:

• El casco se siente suelto: Re-adjust the retention system dial and chin straps as described in Section 4.
• Discomfort or pressure points: Ensure the helmet is level on your head. Loosen the retention system slightly or adjust the internal padding if removable.
• Helmet damaged after impact: Immediately replace the helmet. Even if visible damage is minimal, the internal structure may be compromised.

8. Especificaciones

9. Garantía y soporte

The Giro Fixture Helmet comes with a manufacturer's warranty. For specific details regarding your warranty coverage, please refer to the documentation provided with your purchase or visit the official Giro websitio.

For customer support, product inquiries, or to report any issues, please contact Giro customer service through their official channels.

• Descripción de la garantía: Producer warranty.
• Disponibilidad de repuestos en la UE: 10 años.