Zooz Momentary Push-Button in-Wall Switch ZAC99 Instruction Manual

Producto terminadoview

The Zooz ZAC99 is a momentary push-button in-wall switch designed for various applications requiring temporary contact closure. It is suitable for controlling devices such as garbage disposals or as an accessory switch for Z-Wave dimmer modules to enable local dimming control. This device is not a Z-Wave switch itself but functions as a momentary contact switch.

Características principales:

• Aplicación versátil: Can be used for garbage disposals or as a local control for Z-Wave dimmer modules.
• Momentary Control: Activates a connected device only while the button is pressed.
• Instalación flexible: Compatible with 14 AWG and 12 AWG wires, supporting loads up to 15 A.
• Diseño compacto: Pro delgadofile allows for easier installation in standard switch boxes.

Imagen: Frente view of the Zooz ZAC99 Momentary Push-Button in-Wall Switch. This image shows the white paddle-style button and the mounting frame.

Información de seguridad

• ADVERTENCIA: Risk of Electric Shock. All service should be performed by qualified personnel only.
• Disconnect power at the circuit breaker or fuse box before installation.
• Asegúrese de que todas las conexiones del cableado sean seguras y cumplan con los códigos eléctricos locales.
• Este dispositivo está diseñado únicamente para uso en interiores.
• No exceda la capacidad máxima de carga de 15 Amps.

Instalación (Configuración)

Follow these steps for safe and proper installation of your Zooz ZAC99 Momentary Push-Button in-Wall Switch.

1. Apagar la energía: Localice el disyuntor que controla la ubicación del interruptor y apague la alimentación. Verifique que la alimentación esté apagada usando un volímetro.tage probador.
2. Eliminar el interruptor existente: Retire con cuidado la placa de pared y desatornille el interruptor existente de la caja eléctrica. Desconecte los cables del interruptor antiguo.
3. Identificar cables:
   • Cable de línea (caliente): Generalmente de color negro, trae energía desde el disyuntor.
   • Cable de carga: Typically black, connects to the light fixture or appliance.
   • Cable a tierra: Bare copper or green, connects to the electrical box or ground screw.
4. Wire the ZAC99 Switch:
   

   Imagen: Parte posterior view of the Zooz ZAC99 switch, illustrating the screw terminals for wiring connections.

   • Connect the Line (Hot) wire to one of the screw terminals on the ZAC99 switch.
   • Connect the Load wire to the other screw terminal on the ZAC99 switch.
   • Connect the Ground wire to the green ground screw on the switch or the electrical box.
   • Ensure all connections are tight and secure. The switch accepts 14 AWG and 12 AWG wires.
5. Monte el interruptor: Carefully push the wired switch into the electrical box. Secure it with the provided screws.
6. Instale la placa de pared: Attach the wall plate over the switch.
7. Restaurar energía: Vuelva a encender la energía en el disyuntor.

Nota: This switch is a momentary contact switch. It does not have a neutral wire connection and is designed for simple on/off momentary control. For advanced functionality with Z-Wave dimmer modules, refer to the specific instructions for your Z-Wave device regarding momentary switch configuration.

Instrucciones de funcionamiento

The Zooz ZAC99 switch provides momentary control based on its application.

For Garbage Disposals or Similar Devices:

• Activar: Press and hold the upper part of the paddle switch. The connected device (e.g., garbage disposal) will remain active as long as the button is held.
• Para desactivar: Release the button. The device will turn off.

When Used with a Z-Wave Dimmer Module (Accessory Control):

When configured with a compatible Z-Wave dimmer module (e.g., Aeotec ZW111, Fibaro FGD-212, Qubino ZMNHDD3, ZMNHWD3), the ZAC99 can provide local control for lighting.

• Encender/Apagar: Tap the upper part of the paddle switch once to toggle the light on or off.
• Ajustar el brillo: Press and hold the upper part of the paddle switch to adjust the brightness. Release when the desired brightness level is reached.

Importante: The Z-Wave dimmer module must be configured to recognize a momentary switch for this functionality. Refer to your Z-Wave dimmer module's instruction manual for specific configuration settings (e.g., parameter settings for momentary switch type).

Mantenimiento

The Zooz ZAC99 switch requires minimal maintenance.

• Limpieza: Para limpiar el interruptor, límpielo con un paño suave y seco.amp Paño. No utilice limpiadores abrasivos ni disolventes. Asegúrese de que el aparato esté apagado antes de limpiarlo.
• Controles periódicos: Periodically check the wall plate and switch for any signs of damage or loose connections. If any issues are observed, turn off power and consult a qualified electrician.

Solución de problemas

If you experience issues with your ZAC99 switch, refer to the following common solutions:

• El dispositivo no responde:
  • Ensure power is supplied to the switch at the circuit breaker.
  • Verifique que todas las conexiones del cableado sean seguras y correctas.
  • Check the connected load (e.g., garbage disposal) to ensure it is functioning correctly.
• Not Controlling Z-Wave Dimmer Module:
  • Confirm that the Z-Wave dimmer module is properly installed and powered.
  • Ensure the Z-Wave dimmer module is configured to operate with a momentary switch. This usually involves adjusting a parameter in your Z-Wave hub or controller settings. Refer to the dimmer module's manual for specific instructions (e.g., Zooz Zen72, Option 19, set to Momentary switch).
  • Verify the wiring between the ZAC99 and the Z-Wave dimmer module is correct according to the dimmer module's accessory switch wiring diagram.
• Switch Feels Stiff or Hard to Press:
  • The switch is designed for a tactile click. If it feels unusually stiff or unresponsive, ensure it is properly seated in the electrical box and not obstructed by the wall plate.

Presupuesto

Garantía y soporte

For warranty information or technical support, please contact Zooz directly. Refer to the official Zooz website or your purchase documentation for the most current support contact details and warranty terms.

Marca: ZOOZ

Fabricante: ZOOZ

Websitio: Visit the ZOOZ Store on Amazon