DIRECTV RC66RX IR/RF Remote Control User Manual

Introducción

This manual provides instructions for the DIRECTV RC66RX IR/RF Remote Control. This remote is designed to operate most DirecTV receivers in both Infrared (IR) and Radio Frequency (RF) modes. The RF feature allows control of the receiver without direct line-of-sight. It is compatible with various DirecTV receiver models including R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, and C31. Two AA batteries are included with the remote for immediate use.

Figure 1: Two DIRECTV RC66RX Remote Controls with Batteries

Configuración

1. Instalación de la batería

1. Ubique la tapa del compartimiento de la batería en la parte posterior del control remoto.
2. Deslice la tapa hacia abajo para abrir el compartimento.
3. Inserte dos baterías AA, asegurándose de que los terminales positivo (+) y negativo (-) estén alineados con los indicadores dentro del compartimiento.
4. Deslice la tapa del compartimiento de la batería nuevamente a su lugar hasta que encaje firmemente.

Figure 2: Battery Compartment of the RC66RX Remote

2. Programming for DirecTV Receiver

The RC66RX remote is typically pre-programmed to control your DirecTV receiver. If it does not respond, ensure the remote is set to the correct mode (usually 'DIRECTV' or 'SAT' if applicable, though this model primarily functions for DirecTV). For RF mode, your receiver must be compatible (R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, C31). Refer to your DirecTV receiver's manual for specific RF pairing instructions if needed.

3. Programming for TV and Other Devices (IR Mode)

To control your television or other devices (e.g., AV receiver) with the RC66RX remote, you will need to program it using IR codes. This allows the remote to control functions like TV power, volume, and input.

1. Locate the mode switch at the top of the remote. Slide it to the 'TV' position.
2. Press and hold the 'MUTE' and 'SELECT' buttons simultaneously until the green light at the top of the remote blinks twice.
3. Enter the 5-digit programming code for your TV brand. You can find these codes in your DirecTV receiver's user manual or on the DirecTV support websitio.
4. Point the remote at your TV and press the 'PWR' button. If the TV turns off, the code is correct.
5. If the TV does not turn off, repeat steps 2-4 with the next code for your TV brand.
6. Once the TV is programmed, slide the mode switch back to the 'DIRECTV' position to control your receiver.

Figure 3: Top Section of the RC66RX Remote with Mode Switch

Instrucciones de funcionamiento

The DIRECTV RC66RX remote control features a comprehensive layout for easy navigation and control of your entertainment system.

Figure 4: Full Button Layout of the RC66RX Remote

Funciones de los botones clave:

• ENTRADA DE TV: Recorre las entradas de vídeo disponibles en tu televisor.
• PWR (Potencia): Turns the DirecTV receiver on or off.
• ON/OFF (&TV Power): Turns the programmed television on or off.
• FORMATO: Cambia la relación de aspecto de la pantalla.
• Controles de reproducción (Reproducir, Pausar, Detener, Rebobinar, Avance rápido, Saltar): Controls media playback on your DirecTV receiver.
• REC (Registro): Inicia la grabación del programa actual.
• GUÍA: Muestra la guía de programación.
• ACTIVO: Accesses the DirecTV Active channel for interactive services.
• LISTA: Muestra la lista de programas grabados.
• SALIDA: Sale del menú o pantalla actual.
• ESPALDA: Vuelve a la pantalla o menú anterior.
• MENÚ: Accesses the main DirecTV menu.
• INFORMACIÓN: Muestra información sobre el programa actual.
• SELECT (Center Button): Confirma selecciones en los menús.
• Botones de flecha: Navegar por los menús y canales.
• VOL (+/-): Adjusts the volume of the programmed television.
• MUDO: Mutes the television audio.
• CAMBIAR PÁGINA (Arriba/Abajo): Changes channels or pages through the guide.
• ANTERIOR: Vuelve al anterior viewcanal ed.
• Teclado numérico (0-9, GUIÓN, ENTER): Ingresa directamente los números de canal.
• Botones de colores (rojo, verde, amarillo, azul): Used for special functions within certain menus or applications.

IR vs. RF Mode

The RC66RX remote supports both Infrared (IR) and Radio Frequency (RF) modes. IR mode requires a direct line of sight between the remote and the device being controlled. RF mode uses radio waves, allowing you to control your DirecTV receiver without pointing the remote directly at it, even if the receiver is in a cabinet or another room (within range). Ensure your DirecTV receiver is RF-compatible for this feature to work.

Mantenimiento

Reemplazo de batería

When the remote's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps in the Setup section to replace the two AA batteries.

Limpieza

Para limpiar el control remoto, utilice un paño suave y seco. Para la suciedad difícil, frote ligeramente.ampEnjuague el paño con agua o un limpiador suave no abrasivo. Evite usar productos químicos agresivos o humedad excesiva, ya que esto puede dañar los componentes electrónicos del control remoto.

Solución de problemas

• El control remoto no responde: Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary. Ensure the mode switch is set to the correct device (e.g., 'DIRECTV' for receiver functions).
• TV not responding to power/volume: Verify that the remote has been correctly programmed for your television using the IR programming steps. Ensure the mode switch is set to 'TV' when attempting to control TV functions.
• Buttons sticking or unresponsive: This may indicate dirt or debris under the buttons. Gently clean the remote as described in the Maintenance section. If the issue persists, the remote may need replacement.
• RF mode not working: Confirm your DirecTV receiver model is listed as RF compatible (R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34, C31). Ensure there are no major obstructions blocking the RF signal, although line-of-sight is not strictly required, extreme interference can affect performance.

Presupuesto

Garantía y soporte

For warranty information and customer support, please refer to the documentation provided with your purchase or contact SatelliteSale customer service directly. Keep your proof of purchase for any warranty claims.