1. Introducción
This manual provides essential information for the setup, operation, maintenance, and care of your Fender FA-345CE Auditorium Cutaway Acoustic Guitar. Designed for both acoustic and amplified performance, this instrument features quality laminate construction, including a flame maple top with lacewood back and sides, and a modern Fender 3+3 headstock. The integrated Fishman Presys II pickup system allows for clear, natural amptono lificado.

Figura 1: Frente view of the Fender FA-345CE Auditorium Cutaway Acoustic Guitar in Natural finish.
2. Configuración
2.1 Desembalaje
Retire con cuidado la guitarra de su embalaje. Inspeccione el instrumento para detectar cualquier daño que pueda haberse producido durante el envío. Conserve todo el material de embalaje para su posterior transporte o almacenamiento.
2.2 Ajuste inicial
Your guitar will require tuning before playing. The Fishman Presys II system includes a built-in tuner. Press the "Tuner" button on the preamp to activate it. Pluck each string individually and adjust the tuning machines until the display indicates the correct pitch. The standard tuning for a 6-string guitar is E-A-D-G-B-e (from thickest to thinnest string).
2.3 Battery Installation for Electronics
The Fishman Presys II pickup system requires a 9V battery for operation. The battery compartment is typically located on the side of the guitar, near the preamp controls. Open the compartment, insert a fresh 9V battery, ensuring correct polarity, and close the compartment securely. A low battery indicator may illuminate when the battery needs replacement.

Figure 2: Close-up of the Fishman Presys II preamp with Bass, Volume, Treble controls, and Tuner button.
3. Manejo de la guitarra
3.1 Reproducción acústica
The FA-345CE is designed to produce a rich, resonant acoustic tone. Experiment with different strumming and picking techniques to explore its full sonic range. The auditorium body style provides a balanced sound suitable for various musical genres.
3.2 Amplified Playback (Fishman Presys II System)
A amplify your guitar, connect a standard 1/4-inch instrument cable from the guitar's output jack to an acoustic amplifier or PA system. Use the controls on the Fishman Presys II preamp to shape your sound:
- Volumen: Ajusta el nivel de salida general del ampseñal lificada.
- Bajo: Controls the low-frequency response, adding warmth or reducing muddiness.
- Triplicar: Controls the high-frequency response, adding brightness or reducing harshness.
- Botón de fase: Helps to reduce feedback in amplified settings. Press to invert the phase of the signal.
- Botón sintonizador: Activates the built-in chromatic tuner. The output signal is muted when the tuner is active.
Adjust these controls to achieve your desired tone and to suit the acoustics of your playing environment.
4. Mantenimiento
4.1 Limpieza
- Cuerpo: Wipe the guitar body with a soft, lint-free cloth after each use to remove fingerprints and sweat. For a deeper clean, use a guitar-specific polish sparingly.
- Diapasón: Periodically clean the laurel fretboard with a damp cloth to remove grime. For conditioning, use a small amount of lemon oil or a specialized fretboard conditioner.
- Instrumentos de cuerda: Limpie las cuerdas después de tocar para prolongar su vida útil y mantener el tono.
4.2 Almacenamiento
Store your guitar in a climate-controlled environment, away from extreme temperatures and humidity fluctuations. A guitar case or gig bag provides protection from dust and minor impacts. Avoid direct sunlight and heat sources.
4.3 Reemplazo de cuerdas
Strings should be replaced regularly, depending on playing frequency and personal preference. Old strings can sound dull and affect intonation. When replacing strings, change them one at a time to maintain neck tension. Use light gauge acoustic guitar strings for optimal performance.

Figura 3: Frente view of the guitar headstock, showing the Fender logo and tuning machines.
5. Solución de problemas
- No hay sonido al enchufarlo:
- Check if the 9V battery in the Fishman preamp Está fresco y correctamente instalado.
- Asegúrese de que el cable del instrumento esté conectado de forma segura tanto a la guitarra como al ampSistema de amplificación/PA.
- Verificar el ampEl amplificador está encendido y su volumen está alto.
- Mala calidad de sonido/zumbido:
- Check if strings are old or corroded; replace if necessary.
- Ensure strings are properly seated in the bridge and nut.
- If buzzing persists, it may indicate a need for a professional setup to adjust neck relief or action.
- Inestabilidad de afinación:
- Ensure strings are stretched properly after installation.
- Check if tuning machines are tight and functioning correctly.
- Los cambios extremos de temperatura o humedad pueden afectar la estabilidad de la sintonización.
6. Especificaciones
| Modelo | FA-345CE |
| Número de modelo del artículo | 0971343021 |
| Estilo de carrocería | Auditorium Cutaway |
| Material superior | Flame Maple Wood |
| Material de la espalda | Lacewood |
| Material lateral | Lacewood |
| Material del cuello | OTAN |
| Material del diapasón | Laurel Wood |
| Numero de cuerdas | 6 |
| Configuración de recogida | Piezoelectric (Fishman Presys II) |
| Color | Natural |
| Orientación de la mano | Bien |
| Peso del artículo | 6.6 libras |
| Dimensiones del producto | 46 x 17.9 x 6.5 pulgadas |
7. Garantía y soporte
Your Fender FA-345CE Auditorium Cutaway Acoustic Guitar comes with a 2-Year Warranty, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical assistance, warranty service, or further information, please visit the official Fender website or contact Fender customer support directly. Contact details can typically be found on the Fender websitio o en la documentación incluida con su compra.
Recursos en línea: For additional tips, tutorials, and product registration, visit guardabarros.com.