Bluesound WM200 Universal Wall Mount Instruction Manual

Introducción

Thank you for choosing the Bluesound WM200 Universal Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your wall mount. Please read these instructions thoroughly before installation and retain them for future reference.

The WM200 wall mount is specifically designed for use with Bluesound PULSE, PULSE 2, PULSE 2i, PULSE MINI, and PULSE MINI 2i speakers, offering a secure and aesthetically pleasing mounting solution.

Información de seguridad

• Lee todas las instrucciones: Before installation, carefully read and understand all instructions.
• Verificar la estructura de la pared: Ensure the mounting surface can safely support the combined weight of the wall mount and your speaker. Consult a professional if unsure.
• Utilice herramientas adecuadas: Use only the recommended tools and hardware for installation.
• Instalación segura: Improper installation can result in serious injury or damage to equipment. Ensure all fasteners are tightened securely.
• Mantener fuera del alcance de los niños: Las piezas pequeñas pueden ser un peligro de asfixia.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• 1 x Bluesound WM200 Universal Wall Mount
• Elementos de montaje (tornillos, tacos para pared)
• Manual de instrucciones (este documento)

Figure 1: Bluesound WM200 Wall Mount product packaging.

Configuración e instalación

Follow these steps to securely install your Bluesound WM200 Universal Wall Mount:

1. Elegir la ubicación: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing. Consider the optimal listening height and desired swivel range.
2. Puntos de perforación de marcado: Hold the wall mount against the wall at the desired height and use a pencil to mark the drilling points for the mounting screws. Ensure the mount is level.
3. Perforar agujeros: Using an appropriate drill bit for your wall type (e.g., masonry for brick, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert the provided wall anchors.
4. Fijar el soporte de pared: Align the wall mount with the drilled holes. Insert the mounting screws and tighten them securely. Do not overtighten. The mount is constructed from durable steel for reliable support.
5. Cables de ruta: The WM200 features rubber mouldings designed for flexible wire management. Route your speaker's power and audio cables through these mouldings to keep them tidy and protected.
6. Adjuntar altavoz: Carefully slide your compatible Bluesound speaker onto the wall mount. Ensure it is seated firmly and securely.

Figure 2: Bluesound WM200 Wall Mount with compatible speaker (speaker sold separately).

Figura 3: Lado view of the WM200 mount securely holding a Bluesound speaker.

Operación

The Bluesound WM200 Universal Wall Mount offers a 120° total swivel control. This allows you to adjust the direction of your speaker to optimize sound projection and listening experience. Gently pivot the speaker and mount assembly to achieve the desired angle.

Mantenimiento

To ensure the longevity and appearance of your Bluesound WM200 Wall Mount, follow these simple maintenance guidelines:

• Limpieza: Limpie el soporte con un paño suave y seco para eliminar el polvo. Para manchas difíciles, utilice un paño ligeramente seco.amp Se puede usar un paño y secar inmediatamente. Evite limpiadores abrasivos o disolventes.
• Controles periódicos: Periodically check all mounting screws to ensure they remain tight and secure. Do not overtighten.

Solución de problemas

If you encounter any issues with your WM200 Wall Mount, consider the following:

• El monte se siente suelto: Ensure all mounting screws are securely fastened to the wall and that the speaker is correctly seated on the mount. Re-check the wall structure for stability.
• Speaker not fitting: Verify that your speaker model is compatible with the WM200 mount (PULSE, PULSE 2, PULSE 2i, PULSE MINI, PULSE MINI 2i).
• Dificultad para girar: Ensure no cables are obstructing the swivel mechanism. The swivel should operate smoothly with gentle force.

Presupuesto

Figura 4: Example installation of the Bluesound WM200 Wall Mount in a living space.

Información de garantía

Bluesound products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Bluesound websitio para obtener información detallada sobre la garantía.

Apoyo

For technical assistance, troubleshooting, or further inquiries regarding your Bluesound WM200 Universal Wall Mount, please visit the official Bluesound support website or contact their customer service department. You can typically find contact information and FAQs on the Bluesound websitio:

www.bluesound.com/support