Manual de instrucciones del asiento de inodoro alargado de cierre suave PROFLO PFTSWSC2000

Introducción

Thank you for choosing the PROFLO PFTSWSC2000 Elongated Closed-Front Toilet Seat. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new toilet seat. Please read all instructions carefully before beginning installation to ensure safe and correct usage.

Información de seguridad

• Utilice siempre equipo de seguridad adecuado, como guantes y protección para los ojos, durante la instalación.
• Do not overtighten fasteners, as this may damage the toilet seat or the toilet bowl.
• Mantenga las piezas pequeñas fuera del alcance de los niños para evitar riesgos de asfixia.
• Asegúrese de que todas las conexiones sean seguras antes de su uso.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación.

• PROFLO PFTSWSC2000 Elongated Toilet Seat with Lid
• Herrajes de montaje (pernos, arandelas, tuercas)
• Instrucciones de instalación (este manual)

Instalación

Follow these steps to install your PROFLO PFTSWSC2000 toilet seat.

1. Prepare la taza del inodoro: Ensure the toilet bowl is clean and dry. If replacing an old seat, remove it by unscrewing the nuts from the underside of the bowl where the seat hinges are attached. Clean any residue.
2. Coloque las bisagras: Place the new toilet seat on the toilet bowl, aligning the hinge posts with the mounting holes on the bowl.
3. Insertar pernos de montaje: Insert the mounting bolts through the hinge posts and the holes in the toilet bowl.
4. Asegure con arandelas y tuercas: From underneath the toilet bowl, place a washer onto each bolt, followed by a nut. Hand-tighten the nuts initially.
5. Ajustar alineación: Gently adjust the position of the seat to ensure it is centered and aligned with the toilet bowl. The grip-tight rubber bumpers on the seat help prevent shifting during use. If your seat includes spacers for fine-tuning alignment, insert them as needed between the hinge and the bowl to achieve the desired fit.
6. Ajuste final: Once the seat is properly aligned, use a screwdriver or wrench to firmly tighten the nuts. Do not overtighten.

Operación

The PROFLO PFTSWSC2000 features a soft-close mechanism for quiet and gentle operation.

• Soft-Close Feature: To close the seat or lid, simply push it down gently. The soft-close hinges will engage, allowing the seat and lid to descend slowly and quietly without slamming.
• Parachoques Grip-Tight: The integrated rubber bumpers on the underside of the seat help to minimize shifting and provide stability during use.

Mantenimiento y cuidado

El cuidado adecuado garantizará la longevidad y la apariencia del asiento del inodoro.

• Limpieza: Clean the toilet seat regularly with mild soap and water. Use a soft cloth or sponge.
• Evite los productos químicos agresivos: Do not use abrasive cleaners, strong acids, or alkaline solutions, as these can damage the finish and material of the seat.
• El secado: Wipe the seat dry after cleaning to prevent water spots.

Solución de problemas

Presupuesto

• Modelo: PFTSWSC2000
• Marca: PROFOLO
• Material: Madera moldeada
• Color: Blanco
• Estilo: Elongated, Closed-Front
• Forma: Oval
• Peso del artículo: 6 libras
• Dimensiones del producto: 20 x 15 x 2 pulgadas
• Código postal: 781889338490
• Características: Soft-Close Lid, Easy Clean, Grip-Tight Rubber Bumpers

Garantía y soporte

The PROFLO PFTSWSC2000 Elongated Soft-Close Toilet Seat is covered under PROFLO's Garantía limitada de 1 años. For warranty claims, technical support, or replacement parts, please contact PROFLO customer service. Keep your proof of purchase for warranty validation.

For further assistance, please visit the official PROFLO websitio o comuníquese con su línea de atención al cliente.