1. Introducción
Thank you for choosing the ONKRON M5 WHT Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new wall mount. Please read these instructions thoroughly before beginning installation and retain them for future reference.
The ONKRON M5 WHT is designed to securely hold flat-panel televisions and monitors ranging from 37 to 70 inches, with a maximum weight capacity of 40 kg (88 lbs). It supports VESA mounting patterns from 100x100mm up to 400x400mm, offering full motion capabilities including swivel, tilt, and extension for optimal viewángulos de ing.
2. Información de seguridad
WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty.
- This product is intended for installation by qualified personnel only. If you are unsure about the installation process, consult a professional installer.
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. The wall must be capable of supporting at least four times the weight of the TV and mount.
- No exceda la capacidad máxima de carga de 40 kg (88 libras).
- Verify your TV's VESA mounting pattern (distance between mounting holes on the back of your TV) is within the range of 100x100mm hasta 400x400mm.
- Use only the hardware provided or specified in this manual. Do not use power tools to tighten screws excessively, as this may damage the hardware or the mounting surface.
- Mantenga todas las piezas pequeñas y materiales de embalaje fuera del alcance de los niños, ya que pueden suponer un peligro de asfixia.
- Always check for hidden electrical wires, water pipes, or gas lines in the wall before drilling. Use a stud finder and a reliable method to confirm wall composition.
- Do not install this product on drywall alone. It must be mounted to a solid wood stud, concrete, or brick wall.
3. Contenido del paquete
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or defective, contact ONKRON customer support.

Imagen: Más alláview of the ONKRON M5 WHT TV Wall Mount package, showing the mount, various screws, washers, spacers, and a wrench, alongside the instruction manual and product box.
El paquete normalmente incluye:
- Conjunto de placa de pared
- TV Bracket Arms (Vertical Rails)
- Extension Arms (if required for larger VESA patterns)
- Kit de hardware de montaje (varios tornillos, arandelas, espaciadores para TV y montaje en pared)
- Llave inglesa
- Manual de instrucciones
4. Especificaciones
| Modelo | M5 Blanco |
| Marca | ONKRON |
| Tamaños de televisores compatibles | 37 - 70 pulgadas |
| Capacidad de carga máxima | 40 kg (88 libras) |
| Compatibilidad VESA | 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Ángulo de inclinación | +12° / -2° |
| Ángulo de giro | +/- 120 ° |
| Distancia a la pared (mín.-máx.) | 45 mm - 450 mm (1.7 - 17.7 pulgadas) |
| Material | Acero aleado |
| Color | Blanco |
| Dimensiones del producto | 56 x 25 x 23 cm (plegado) |
| Peso del producto | 3.83 kilogramos |

Image: Detailed VESA compatibility diagram for the ONKRON M5 WHT mount, illustrating various hole patterns from 100x100mm to 400x400mm.
5. Configuración e instalación
5.1 Lista de verificación previa a la instalación
- Verificar la compatibilidad del televisor: Check your TV's weight and VESA mounting pattern against the mount's specifications.
- Identificar el tipo de pared: Determine if your wall is solid concrete, brick, or wood stud. Do not install on drywall alone.
- Reunir herramientas: You will need a drill, stud finder (for wood studs), level, tape measure, pencil, and a Phillips head screwdriver.
- Área despejada: Ensure the installation area is clear of obstructions and provides enough space to work safely.
5.2 Montaje de la placa de pared
- Mark Mounting Location: Use a stud finder to locate the center of a wood stud. Mark the desired height for the top of your TV. Use a level to ensure the marks for the wall plate are perfectly horizontal.
- Perforar agujeros piloto: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the lag bolts provided. For wood studs, typically a 5.5mm (7/32") bit is used. For concrete/brick, a 10mm (3/8") masonry bit is usually required, along with wall anchors.
- Placa de pared segura: Attach the wall plate to the wall using the provided lag bolts and washers. Tighten them firmly but do not overtighten. Ensure the wall plate is level.
5.3 Fijación de los soportes del televisor al televisor
- Seleccione tornillos para TV: Choose the correct diameter and length of screws (M4, M6, M8) that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit and prevent damage to the TV.
- Fijar rieles verticales: Secure the two vertical TV bracket rails to the back of your television. Ensure they are centered and aligned vertically. The hooks on the rails should face upwards.
- Attach Extension Arms (if needed): For larger VESA patterns (e.g., 400x400mm), attach the extension arms to the vertical rails using the provided hardware.
5.4 Montaje del televisor en la placa de pared
- Lift and Hook TV: With assistance, carefully lift the television and hook the vertical TV bracket rails onto the wall plate. Ensure both rails are securely seated on the wall plate.
- Tornillos de seguridad seguros: Locate the safety screws at the bottom of the vertical rails. Tighten these screws to lock the TV onto the wall plate, preventing accidental dislodgement.
6. Instrucciones de funcionamiento
The ONKRON M5 WHT mount offers flexible positioning for your TV. Always handle the TV gently when making adjustments.
6.1 Adjusting Extension and Swivel

Image: The ONKRON M5 WHT mount demonstrating its extension capabilities, from a slim folded position (1.7 inches from wall) to a fully extended position (17.7 inches from wall).
To extend or retract the TV from the wall, gently pull or push the television. The articulated arms will allow the TV to move smoothly. To swivel the TV left or right, gently rotate the screen to your desired viewing angle. The mount allows for a swivel of up to +/- 120 degrees.
6.2 Ajuste de la inclinación

Image: The ONKRON M5 WHT mount illustrating its tilt function, showing angles from -2 degrees to +10 degrees, with a close-up of the tilt adjustment mechanism.
The mount allows for a tilt range of +12 degrees upwards and -2 degrees downwards. To adjust the tilt, loosen the tilt adjustment knobs or bolts on the TV bracket arms, set the TV to the desired angle, and then re-tighten the knobs/bolts to secure the position. This helps reduce glare and optimize viewEn.
6.3 Gestión de cables
The ONKRON M5 WHT features integrated cable management clips along the arms. Route your TV cables through these clips to keep them organized and prevent tangling, contributing to a clean and tidy appearance.
7. Mantenimiento
- Limpieza: Limpie el soporte con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes, ya que podrían dañar el acabado.
- Controles periódicos: Revise periódicamente todos los tornillos y pernos para asegurarse de que estén bien apretados y seguros. Vuelva a apretarlos si es necesario.
- Lubricación: The moving parts of the mount are designed for smooth operation. No lubrication is typically required. If movement becomes stiff, ensure no debris is obstructing the joints.
8. Solución de problemas
- El televisor no está nivelado: Check the wall plate and TV bracket rails with a level. Adjust the wall plate if possible, or use the fine-tuning adjustments on the TV brackets if available. Ensure all screws are tightened evenly.
- Dificultad para mover el televisor: Ensure all adjustment knobs/bolts are sufficiently loosened before attempting to move the TV. Check for any obstructions or cables caught in the mechanism.
- La televisión se siente inestable: Immediately remove the TV from the mount. Re-check all installation steps, especially the wall mounting and TV bracket attachment. Ensure all screws are securely tightened and the wall can support the weight. If unsure, consult a professional.
- Partes faltantes: Refer to the 'Package Contents' section. If parts are missing, contact ONKRON customer support for assistance.
9. Garantía y soporte
ONKRON products are manufactured with quality and durability in mind. For warranty information, technical support, or to purchase replacement parts, please visit the official ONKRON websitio o comuníquese con su departamento de servicio al cliente.
You can find more information and contact details on the ONKRON brand store: ONKRON Store