KuWFi CPE810UT 4G LTE Router Instruction Manual

1. Introducción

The KuWFi CPE810UT is a versatile 4G LTE WiFi Internet Router designed to provide reliable wireless internet access. It supports HSPA/LTE Data SIM cards for direct internet access and can also function in Gateway mode when a 4G SIM card is not available. This router offers multiple work modes including 4G to WiFi, 4G to LAN, PPPoE, and WiFi Repeater mode, supporting 4G FDD-LTE bands B2/B4/B12 for Canada.

Its compact design makes it easy to connect and carry, allowing up to 32 WiFi users to share the internet securely in various locations.

2. Producto terminadoview

2.1. Disposición del dispositivo

The KuWFi CPE810UT router features a clean design with essential indicators and ports for easy operation.

Figura 2.1: Frente view of the KuWFi CPE810UT 4G LTE Router, showing LED indicators for power, Wi-Fi, LAN, and 4G signal strength.

Figura 2.2: Atrás view of the KuWFi CPE810UT 4G LTE Router, highlighting the LAN ports, Micro USB, DC In, USB port, and external antennas.

Figura 2.3: detallada view of the router's back panel, showing LAN ports, USB port, DC In, and the SIM card slot location.

2.2. Indicadores LED

• Fuerza: Indicates the device power status.
• LAN: Indica actividad en los puertos LAN.
• WPS: Indica el estado de la función WPS.
• Wi-Fi: Indica el estado de la red Wi-Fi.
• Intensidad de la señal: Indica la intensidad de la señal 4G LTE.

2.3. Puertos y botones

• Ranura para tarjeta SIM: For inserting your 4G LTE data SIM card.
• LAN Ports (4): Para conexiones cableadas a dispositivos.
• DC en: Power input port (5V).
• Puerto USB: Para conectar dispositivos USB.
• Botón de reinicio: To restore factory settings (press and hold).
• Botón WPS: For quick and secure Wi-Fi connection.

3. Lista de empaque

Por favor, revise el contenido de su paquete. Si falta algún artículo o está dañado, contacte con atención al cliente.

• KuWFi CPE810UT 4G LTE Router
• Adaptador de corriente
• Cable Ethernet
• Manual de usuario

Figure 3.1: The KuWFi CPE810UT router, power adapter, Ethernet cable, and user manual included in the package.

4. Instrucciones de configuración

4.1. Inserción de la tarjeta SIM

1. Asegúrese de que el enrutador esté apagado.
2. Locate the SIM card slot on the side or back of the router.
3. Insert your activated 4G LTE data SIM card into the slot with the chip facing up, ensuring it clicks into place.
4. Ensure the SIM card's PIN code is disabled before insertion for plug-and-play functionality.

Figura 4.1: Lado view of the router showing the SIM card slot. Insert your Micro SIM card here.

4.2. Encendido

1. Connect the power adapter to the DC In port on the router.
2. Conecte el adaptador de corriente a una toma de pared.
3. The Power LED indicator will light up, and other indicators will follow as the device boots up.

4.3. Conexión a Wi-Fi

1. En su computadora o dispositivo móvil, busque redes Wi-Fi disponibles.
2. Locate the Wi-Fi network name (SSID) printed on the label at the bottom of your router (e.g., "WiFi-XXXXXX", where XXXXXX are the last 6 digits of the MAC address).
3. Enter the default Wi-Fi Key (password) also found on the router's label.

4.4. Accessing the Admin Panel and APN Configuration

1. Abrir una web browser (e.g., Chrome, Firefox) on a device connected to the router's Wi-Fi.
2. In the address bar, type the default router IP address: 192.168.10.1 y presione Enter.
3. Log in using the default username and password (usually "admin" for both, check the router label if different).
4. If you experience "Connect WiFi but no network data connection", you may need to configure the APN settings. Navigate to Red > APN > Permitir.
5. Modify the APN settings according to your SIM card provider's information. You can find this information by inserting your SIM card into a smartphone and checking its mobile network access point settings.

Figure 4.2: Visual guide for configuring APN settings in the router's admin panel.

5. Modos de funcionamiento

The KuWFi CPE810UT supports various operating modes to suit different network requirements:

• 4G to WiFi Mode: Provides Wi-Fi internet access using a 4G LTE data SIM card.
• 4G to LAN Mode: Provides wired internet access via LAN ports using a 4G LTE data SIM card.
• PPPoE Mode: Connects to the internet via a wired modem using PPPoE.
• Modo repetidor WiFi: Extiende el alcance de una red Wi-Fi existente.
• Modo de puerta de enlace: Connects to an existing modem for internet access if a 4G SIM card is not used.

To switch between modes, access the router's admin panel (192.168.10.1) and navigate to the "Work Mode" settings.

6. Mantenimiento

• Mantenga el dispositivo en un lugar fresco y seco, alejado de la luz solar directa y de fuentes de calor.
• Limpie el dispositivo con un paño suave y seco. No utilice limpiadores líquidos.
• Periodically check for firmware updates through the admin panel to ensure optimal performance and security.
• If the device becomes unresponsive, perform a soft reboot by unplugging and re-plugging the power adapter. If issues persist, use the reset button to restore factory settings (note: this will erase all custom configurations).

7. Solución de problemas

7.1. No hay conexión a Internet

• Comprobar tarjeta SIM: Ensure the SIM card is correctly inserted and activated. Verify that the PIN code is disabled.
• Configuración APN: Confirm that the APN settings in the router's admin panel match your SIM card provider's specifications (refer to Section 4.4).
• Intensidad de la señal: Check the 4G signal strength indicator on the router. If the signal is weak, try relocating the router.
• Compatibilidad de tarjeta SIM: Ensure your SIM card supports the router's bands (4G FDD-LTE: B2/B4/B12 for Canada). Roaming service, Virtual SIM Cards, and IoT SIM Cards may not be supported.

7.2. Conexión inestable

• Estabilidad de la señal: In the router's admin panel, you can manage settings to lock the 4G or 3G network to improve stability if the signal is unstable.
• Ubicación del enrutador: Asegúrese de que el enrutador esté ubicado en un área abierta, lejos de obstrucciones y otros dispositivos electrónicos que puedan causar interferencias.

7.3. Forgotten Wi-Fi Password or Admin Login

• Router Label: The default Wi-Fi SSID and password, as well as the admin IP address and login credentials, are printed on a label on the router.
• Restablecimiento de fábrica: If you have changed the password and forgotten it, perform a factory reset by pressing and holding the Reset button for about 10 seconds while the router is powered on. This will revert all settings to default.

8. Especificaciones

9. Vídeos instructivos

9.1. KuWFi 4G LTE Wireless WiFi Router Setup (CPE812 Model)

9.2. KuWFi WE1326 BKC Installation Video

10. Garantía y soporte

KuWFi offers comprehensive customer support for its products:

• Política de reembolso de 30 días: For 30 days after the date of purchase, you can return your undamaged KuWFi product for a full refund for any reason.
• Garantía 12-Mes: A 12-month warranty is provided for quality-related issues, offering a replacement or full refund.
• 24-Hour Email Support: For any inquiries or assistance, please contact KuWFi customer service via email.