Franke KNG 110-37

Franke Kubus 2 KNG 110-37 Fragranite Kitchen Sink Instruction Manual

Model: KNG 110-37 (Part No. 125.0527.367)

1. Introducción

Thank you for choosing the Franke Kubus 2 KNG 110-37 Fragranite Kitchen Sink. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new sink. Please read these instructions carefully before beginning installation and retain them for future reference.

The Franke Kubus 2 KNG 110-37 is a single bowl, rectangular undermount sink crafted from durable Fragranite, designed for modern kitchens. Its robust construction ensures long-lasting performance and aesthetic appeal.

2. Información de seguridad

  • Utilice siempre equipo de protección personal (EPP) adecuado, como gafas de seguridad y guantes, durante la instalación.
  • Asegúrese de que todas las líneas de suministro de agua estén cerradas antes de comenzar cualquier trabajo de plomería.
  • Handle the sink with care to avoid damage or injury. Fragranite sinks are heavy.
  • Si no está seguro acerca de alguna parte del proceso de instalación, consulte a un plomero calificado o un instalador profesional.
  • Do not use harsh chemicals or abrasive cleaners on the sink surface, as this may damage the Fragranite material.

3. Contenido del paquete

Please check that all components are present and undamaged before proceeding with installation. The package should typically include:

  • Franke Kubus 2 KNG 110-37 Fragranite Sink
  • Drain assembly (grid type)
  • Mounting clips and fasteners for undermount installation
  • Plantilla de instalación (si se proporciona)

Note: Additional plumbing components such as P-trap, faucet, and sealant are typically sold separately.

4. Configuración e instalación

The Franke Kubus 2 KNG 110-37 sink is designed for undermount installation. Accurate measurements and proper sealing are crucial for a successful installation.

4.1. Dimensiones y recorte

Refer to the technical drawing below for precise dimensions required for countertop cutout and sink placement. Ensure the cutout is made according to the provided template or the exact dimensions specified.

Technical drawing of Franke Kubus 2 KNG 110-37 sink with dimensions

Figure 1: Franke Kubus 2 KNG 110-37 Sink Dimensions. Este diagrama ilustra el enfoque de arriba hacia abajo. view of the sink with key measurements in millimeters. The overall width is 410mm, and the overall depth is 460mm. The internal bowl width is 370mm, and the internal bowl depth is 420mm. The corner radius is R10. The drain opening is centrally located. These dimensions are critical for accurate countertop cutting and installation.

  • Dimensiones generales: Approximately 410mm (W) x 460mm (D)
  • Dimensiones del tazón: Approximately 370mm (W) x 420mm (D)
  • Radio de esquina: R10
  • Tipo de instalación: debajo del montaje

4.2. Pasos de instalación (generales)

  1. Preparar la encimera: Ensure the countertop cutout matches the sink dimensions. The edges should be smooth and clean.
  2. Aplicar sellador: Aplique un cordón continuo de sellador de silicona alrededor del borde del fregadero donde entrará en contacto con la parte inferior de la encimera.
  3. Posición del fregadero: Carefully lift and position the sink underneath the countertop cutout, aligning it correctly.
  4. Fijar con clips: Attach the provided mounting clips to the sink rim and tighten them against the underside of the countertop. Ensure even pressure to create a watertight seal.
  5. Instalar el conjunto de drenaje: Install the grid drain assembly into the sink's drain opening, following the manufacturer's instructions for the drain kit. Use plumber's putty or sealant as required to ensure a watertight seal.
  6. Conectar fontanería: Connect the drain assembly to your household plumbing (P-trap, waste pipe). Ensure all connections are tight and leak-free.
  7. Sellador de curado: Allow the silicone sealant to cure completely according to the sealant manufacturer's instructions before using the sink.

5. Operación

The Franke Kubus 2 KNG 110-37 sink is designed for everyday kitchen use. Operate your sink by controlling water flow and temperature via your installed faucet. The grid drain type is designed to efficiently manage water drainage while preventing larger debris from entering the plumbing system.

  • Ensure the drain is clear of obstructions for optimal water flow.
  • Avoid pouring extremely hot liquids (e.g., boiling oil) directly into the sink without running cold water, as extreme temperature changes can potentially affect the material over time.

6. Mantenimiento y cuidado

Proper care will help maintain the appearance and longevity of your Franke Fragranite sink. Fragranite is a durable material, but regular cleaning is recommended.

  • Limpieza diaria: Wipe the sink with a soft cloth and warm soapy water after each use. Rinse thoroughly with clean water and wipe dry to prevent water spots and mineral buildup.
  • Manchas rebeldes: For more stubborn stains, use a non-abrasive liquid cleaner specifically designed for composite sinks. Apply with a soft sponge, rub gently, then rinse thoroughly and dry.
  • Evitar: Do not use abrasive cleaners, scouring pads, steel wool, strong acids, alkalis, or harsh chemical drain cleaners, as these can damage the Fragranite surface.
  • Resistencia al calor: While Fragranite is highly heat resistant, it is advisable to use a trivet or heat pad for extremely hot pots and pans to prevent potential thermal shock or discoloration over prolonged exposure.
  • Prevención de arañazos: Although durable, avoid dragging heavy or sharp objects across the sink surface to prevent scratches.
  • Cuidado del drenaje: Regularly clean the grid drain to remove food particles and debris, ensuring efficient drainage and preventing odors.

7. Solución de problemas

ProblemaPosible causaSolución
Drenaje lentoDesagüe o sifón obstruido.Remove and clean the drain stopper/grid. Clear any blockages in the P-trap. Avoid chemical drain cleaners; use natural methods or consult a plumber.
Fugas alrededor del desagüe o conexionesLoose connections, worn seals, or improper sealant application.Check and tighten all plumbing connections. Inspect and replace worn washers or seals. Reapply plumber's putty or silicone sealant if necessary.
Manchas de agua/Acumulación de mineralesResiduos de agua dura que se dejan secar en la superficie del fregadero.Wipe the sink dry after each use. For existing spots, use a mild vinegar solution (diluted) or a specialized descaler for composite sinks, then rinse thoroughly.
Decoloración/ManchasExposure to strong staining agents (e.g., coffee, wine, dyes) or improper cleaning.Clean spills immediately. For persistent stains, use a non-abrasive cleaner recommended for Fragranite sinks. Avoid abrasive materials.

8. Especificaciones

MarcaFranco
Número de modelo125.0527.367 (KNG 110-37)
MaterialFragranite (Composite Granite)
ColorArena
FormaRectangular
Tipo de instalacióndebajo del montaje
Tipo de drenajeRed
Dimensiones del producto (total)16.14"D x 18.11"W x 7.87"H (Approx. 410mm W x 460mm D x 200mm H)
Instrucciones de cuidadoWipe with Dry Cloth (refer to Section 6 for detailed care)

9. Garantía y soporte

Franke products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Franke websitio.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Franke customer support. Contact information can typically be found on the Franke websitio web o en la documentación de su producto.

Franke Oficial Websitio: www.franke.com

© 2024 Franke. Todos los derechos reservados. La información de este manual está sujeta a cambios sin previo aviso.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.