1. Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
Figure 1: ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler with 240mm radiator and dual fans.
2. Contenido del paquete
Verifique que todos los elementos enumerados a continuación estén presentes en el paquete de su producto:
- 1 x ROG RYUO 240 Liquid Cooler (Pump unit with integrated OLED panel and 240mm radiator)
- 2 x 120mm ROG Ryuo Fan Model 12
- 1 x Accessory Pack of Screws and brackets (for various CPU sockets)
- 1 x USB Cable for Software control
- Thermal compound (pre-applied on cold plate)
- 1 x Quick Start Guide (this document)
Figure 2: All components of the ASUS ROG RYUO 240 Liquid CPU Cooler.
3. Configuración e instalación
Follow these general steps for installing your ASUS ROG RYUO 240 Liquid CPU Cooler. Refer to your motherboard manual for specific details regarding CPU socket preparation.
- Prepare el zócalo de la CPU: Install the appropriate backplate and standoffs for your CPU socket (Intel or AMD) as indicated in the accessory pack.
- Monte el radiador: Secure the 240mm radiator to an available fan mount in your PC case. Ensure proper airflow direction (intake or exhaust) based on your case's cooling design.
- Instalar los ventiladores: Attach the two 120mm ROG Ryuo Fan Model 12 fans to the radiator using the provided screws.
- Position the Pump Head: Carefully place the pump head onto the CPU, aligning it with the standoffs. The thermal compound is pre-applied.
- Secure the Pump Head: Use the appropriate mounting brackets and thumb screws to secure the pump head firmly to the CPU socket. Do not overtighten.
- Conectar los cables del ventilador: Connect the 4-pin PWM fan cables from the fans to the fan headers on the pump unit or directly to your motherboard's CPU_FAN/CHA_FAN headers.
- Conectar la alimentación de la bomba: Connect the pump power cable to an available AIO_PUMP or CPU_OPT header on your motherboard.
- Conecte el cable USB: Connect the included USB cable from the pump unit to an available internal USB 2.0 header on your motherboard. This is essential for software control of the OLED panel and RGB lighting.
- Sistema de organización de cables: Coloque todos los cables de forma ordenada para garantizar un flujo de aire adecuado y una construcción limpia.
Figure 3: ROG Ryuo Fan Model 12.
4. Operation and Software Control
The ASUS ROG RYUO 240 features a 1.77" full-color OLED panel and Aura Sync addressable RGB lighting, both controllable via ASUS LiveDash software.
4.1. LiveDash Software
To fully utilize the OLED panel and RGB lighting customization, download and install the latest LiveDash software from the official ASUS support website. Ensure you also have the Aura Sync software installed for full compatibility.
- OLED Panel Customization: The LiveDash software allows you to display real-time system statistics (e.g., CPU temperature, fan speed), personalized logos, or custom animations on the 1.77" OLED panel. Supported image formats include GIF and JPG with a resolution of 160 x 128 pixels and a maximum size of 1 MB.
- Iluminación RGB Aura Sync: Synchronize the cooler's RGB lighting effects with other Aura Sync-enabled components in your system for a unified aesthetic.
- Control del ventilador: Utilize the precise PWM pump and fan control features within LiveDash to optimize airflow and static pressure, balancing cooling performance with noise levels.
Figure 4: Customizable RGB lighting on the pump head.
Figure 5: The 1.77" OLED panel on the pump head.
5. Mantenimiento
Regular maintenance ensures optimal performance and extends the lifespan of your liquid CPU cooler.
- Eliminación de polvo: Limpie periódicamente las aletas del radiador y las aspas del ventilador para evitar la acumulación de polvo, que puede dificultar el flujo de aire y reducir la eficiencia de refrigeración. Utilice aire comprimido o un cepillo suave.
- Inspección del ventilador: Check fans for any signs of wear, unusual noise, or obstructions. Ensure they are securely mounted.
- Tuberías y conexiones: Inspect the tubing for any kinks, leaks, or damage. Ensure all connections are secure.
- Pasta térmica: While thermal paste is pre-applied, consider reapplying it if you remove the pump head for any reason, or if you notice a significant increase in CPU temperatures over time.
6. Solución de problemas
If you encounter issues with your ASUS ROG RYUO 240, refer to the following common troubleshooting steps:
- No Power/No RGB/OLED Display Off:
- Ensure all power cables (pump, fans) are securely connected to the motherboard headers.
- Verify the internal USB 2.0 cable is correctly connected to both the pump unit and the motherboard.
- Check LiveDash and Aura Sync software settings to ensure RGB and OLED are enabled and configured correctly.
- Altas temperaturas de la CPU:
- Confirme que la bomba esté funcionando (es posible que sienta una ligera vibración o escuche un leve zumbido).
- Asegúrese de que los ventiladores giren y estén correctamente orientados para el flujo de aire.
- Verifique que el cabezal de la bomba esté montado de forma segura en la CPU y que haga buen contacto.
- Verifique si hay acumulación de polvo en las aletas del radiador y límpielas si es necesario.
- Ensure LiveDash fan control settings are not set too low.
- Ruido inusual del enfriador:
- Identify if the noise is coming from the fans or the pump.
- If from fans, check for obstructions or loose mounting. Consider adjusting fan curves in LiveDash.
- If from the pump, ensure the pump is running at an appropriate speed. Some pump noise is normal, but excessive gurgling might indicate air in the loop (which usually resolves itself over time).
- LiveDash Software Issues (e.g., OLED logo not changing):
- Ensure you have downloaded and installed the latest version of LiveDash and Aura Sync software from the official ASUS support websitio.
- Restart the LiveDash application or your computer.
- Verify that custom images/animations meet the specified resolution (160x128 pixels) and size (1MB) requirements.
- Some games or anti-cheat software may conflict with LiveDash. Try exiting LiveDash before launching such applications if you experience issues.
7. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Asus |
| Modelo | ROG RYUO 240 |
| Dimensiones del producto | 9" de largo x 1.89" de ancho x 9" de alto |
| Método de enfriamiento | Agua |
| Tamaño del radiador | 240 mm |
| Tamaño del ventilador | Dual 120mm (ROG Ryuo Fan Model 12) |
| Velocidad máxima de rotación | 2442 RPM |
| Capacidad de flujo de aire | 81 pies cúbicos por minuto |
| Nivel de ruido | 37.6 decibelios |
| Panel OLED | 1.77" Full-color OLED |
| Iluminación RGB | Aura Sync Addressable RGB |
| Tipo de conector de alimentación | 4-pin PWM |
| Volumentage | 12 voltios |
| Quétage | 60 W |
| Material | Cobre Aluminio |
| Dispositivos compatibles | AMD: AM4, TR4* |
*Note: TR4 socket mounting requires a separate bracket, often included with TR4 CPUs.
8. Información de garantía
The ASUS ROG RYUO 240 RGB AIO Liquid CPU Cooler comes with a Garantía de 3 años from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official ASUS warranty policy available on their websitio.
Guarde su comprobante de compra para reclamos de garantía.
9. Soporte
For the latest drivers, utilities, FAQs, and product support, please visit the official ASUS support websitio:
ASUS ROG RYUO 240 Support Page
You can also contact ASUS customer service for further assistance.