1. Introducción
Gracias por la compraasing the CLP Cologne Bar Stool Set. This manual provides essential information for the safe assembly, operation, maintenance, and care of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
2. Instrucciones de seguridad
- Asegúrese de que todas las piezas estén presentes y sin daños antes del montaje. No utilice el producto si alguna pieza falta o está dañada.
- Monte los taburetes de bar sobre una superficie suave y limpia para evitar rayones.
- No apriete demasiado los tornillos durante el montaje, ya que esto puede dañar los componentes.
- Mantenga a los niños y las mascotas alejados del área de montaje. Las piezas pequeñas pueden representar un peligro de asfixia.
- Do not stand on the bar stool. It is designed for seating only.
- Revise periódicamente todos los sujetadores para asegurarse de que permanezcan ajustados.
- Do not exceed the maximum weight capacity (not specified, but generally assume standard adult weight).
3. Contenido del paquete
Your CLP Cologne Bar Stool Set includes the following components for two bar stools:
- 2 x Seat with backrest (Faux Leather)
- 2 x Gas lift cylinder
- 2 x Base plate (Chrome-look metal)
- 2 x Footrest (Chrome-look metal)
- 1 x Set of assembly hardware (screws, washers, Allen key)
4. Instrucciones de montaje
Follow these steps to assemble each bar stool:
- Step 1: Attach the Footrest to the Gas Lift.
Carefully slide the footrest onto the gas lift cylinder. Ensure it is securely seated and oriented correctly. The footrest typically has a small opening that slides over the gas lift's lower section.
Imagen: Primer plano view of the chrome base and footrest assembly, showing how the footrest attaches to the gas lift pole.
- Step 2: Insert the Gas Lift into the Base.
Place the large circular base plate on a flat, stable surface. Insert the wider end of the gas lift cylinder (with the footrest attached) into the central hole of the base plate. The gas lift should sit firmly in the base.
Imagen: Detallada view of the circular chrome base, illustrating where the gas lift cylinder is inserted.
- Step 3: Attach the Seat to the Gas Lift.
Align the mounting plate on the underside of the seat with the top of the gas lift cylinder. Carefully lower the seat onto the gas lift, ensuring it clicks into place. Some models may require securing with screws from the underside of the seat into the gas lift mechanism. Refer to the specific hardware provided.
Imagen: Side profile of the bar stool, showing the connection point between the seat and the gas lift cylinder.
- Paso 4: Comprobación final.
Once assembled, gently test the stability of the stool. Ensure all connections are secure and the stool does not wobble. Repeat the process for the second bar stool.
Image: A pair of fully assembled CLP Cologne bar stools, showcasing el producto completo.
5. Instrucciones de funcionamiento
5.1 Ajuste de altura
The bar stool features a gas lift mechanism for seamless height adjustment. To adjust the height:
- Para levantar el asiento: Lift the lever located under the seat while standing up, allowing the seat to rise to the desired height. Release the lever to lock the height.
- Para bajar el asiento: Lift the lever located under the seat while seated, applying your weight to the seat. The seat will lower. Release the lever to lock the height.
5.2 Función giratoria
The seat of the bar stool can rotate 360 degrees. Simply turn the seat in the desired direction. No lever or button is required for this function.
6. Mantenimiento y cuidado
El cuidado adecuado prolongará la vida útil y la apariencia de sus taburetes de bar.
- Faux Leather Upholstery: Para suciedad leve, limpie con adamp cotton cloth moistened with lukewarm water. For more stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners or solvents.
- Metal Surfaces (Chrome-look): Clean metal surfaces with a mild detergent and a soft cloth. Wipe dry immediately to prevent water spots. Avoid harsh chemicals or abrasive materials that could scratch the finish.
- General: Revise periódicamente todos los tornillos y pernos para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Avoid direct sunlight and heat sources to prevent material degradation.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El taburete se tambalea o es inestable. | Tornillos de montaje sueltos o suelo irregular. | Check and tighten all assembly screws. Ensure the stool is on a flat, even surface. |
| El ajuste de altura no funciona. | Gas lift lever not fully engaged or gas lift cylinder is faulty. | Ensure the lever is fully pulled up or pushed down. If the issue persists, contact customer support. |
| Ruido chirriante durante el uso. | Conexiones sueltas o fricción entre piezas. | Check and tighten all screws. A small amount of silicone spray on moving parts (avoiding upholstery) may help. |
8. Especificaciones
- Modelo: Cologne Bar Stool
- Marca: CLP
- Color: Negro
- Material (Seat Upholstery): Faux Leather (100% Polyurethane)
- Material (Marco): Metal (Chrome-look)
- Altura total: 94.5 - 115 cm (37.2 - 45.3 pulgadas)
- Ancho total: 38.5 cm (15.2 pulgadas)
- Profundidad total: 47 cm (18.5 pulgadas)
- Altura del asiento: 60 - 80.5 cm (23.6 - 31.7 pulgadas)
- Seat Dimensions (WxD): 38.5 x 38 cm (15.2 x 15.0 pulgadas)
- Altura del respaldo: 36.5 cm (14.4 pulgadas)
- Peso del artículo: Approximately 9 kg (19.8 lbs) per stool
- Requiere ensamblaje: Sí
- Cantidad: 2 items per set
9. Garantía y soporte
Para obtener información sobre la garantía o asistencia técnica, consulte la documentación de compra o póngase en contacto con su distribuidor. Conserve el comprobante de compra para cualquier reclamación de garantía.
Manufacturer: CLP