Anderic RRLC16.2

Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

Model: RRLC16.2 | Brand: Anderic

Introducción

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

Características del producto

  • Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
  • Uncompromised Quality: Engineered for superior performance and durability compared to original remotes.
  • Operación sin esfuerzo: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
  • Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
  • Compartimiento seguro de la batería: Includes an optional screw to secure the battery cover, preventing accidental opening.

Configuración

1. Instalación de baterías

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

  1. Ubique el compartimiento de la batería en la parte posterior del control remoto.
  2. Deslice la tapa de la batería hacia abajo para abrirla.
  3. Inserte dos pilas AAA, asegurándose de la polaridad correcta (+ y -).
  4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.
Atrás view of Anderic RRLC16.2 remote control showing the battery compartment with an optional screw for securing the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

Instrucciones de funcionamiento

Frente view of Anderic RRLC16.2 remote control showing all buttons including power, directional pad, OK, back, home, volume, mute, and streaming service shortcuts.

Imagen: Frente view of the Anderic RRLC16.2 remote control.

  • Botón de encendido (●): Located at the top, press to turn your TV on or off.
  • Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
  • Botón de retroceso (←): Vuelve a la pantalla o menú anterior.
  • Botón de inicio (⌂): Regresa a la pantalla de inicio de Roku.
  • Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
  • Reproducir/Pausa, Rebobinar, Avanzar rápidamente: Standard media control buttons for content playback.
  • Teclas de atajo: Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

Compatibilidad

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review the compatibility details below:

  • Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
  • Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
  • Compatible with Roku Box (Requires Programming).
  • NOT Compatible with Roku Streaming Sticks.
Compatibility chart for Anderic RR-LC-16.2 remote, showing checkmarks for Sharp Roku TV models and Roku Box (with note for programming), and an X for Roku Stick.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

  1. Mantenga pulsado el ⌂ (Inicio) y ← (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
  2. Press and release the key to be learned. The indicator light will flash slowly.
  3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
  4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
  5. Repita los pasos 2 a 4 para aprender otras claves.
  6. Prensa ⌂ (Home) to save and exit, or the remote will exit automatically after 20 seconds.

Restablecer el estado predeterminado de fábrica

Mantenga pulsado ⌂ (Inicio) y ← (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

Eliminar todas las claves aprendidas

Mantenga pulsado ⌂ (Inicio) y ★ (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Detailed diagram of the Anderic RR-LC-16.2 remote control with programming instructions for various Roku TV brands and Roku Streaming Players.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

Presupuesto

Dimensiones del producto 5.75 x 1.75 x 1 pulgadas
Peso del artículo 1.76 onzas
Número de modelo del artículo RRLC16.2
Baterías Se requieren 2 pilas AAA
Marca Andérico
Característica especial Universal
Color Negro
Número máximo de dispositivos compatibles 2
Dispositivos compatibles Streaming Device, Television

Solución de problemas

  • El control remoto no responde: Asegúrese de que las baterías estén correctamente instaladas y no agotadas. Reemplácelas si es necesario.
  • Línea de visión: The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
  • Funcionalidad incorrecta: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
  • Las teclas de acceso directo no funcionan: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

Garantía y soporte

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official webSitio web o contacte con el servicio de atención al cliente. Conserve el recibo de compra para reclamaciones de garantía.

Anderic is a registered trademark of Dan's Electronics Etc., Inc. All Rights Reserved. We are not affiliated with Roku. Roku is a registered trademark of Roku Inc.

Para obtener ayuda, visite: www.anderic.com