ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Alta calidad: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Smooth Dimmable: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Baja Profile Diseño: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Amplias aplicaciones: Adecuado para damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Seguridad asegurada: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Tuercas de alambre
• Manual de instrucciones

3. Información de seguridad

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• ADVERTENCIA: Riesgo de shock eléctrico. Desconecte la energía en el fusible o disyuntor antes de realizar la instalación o el mantenimiento.
• ADVERTENCIA: Riesgo de incendio. Usar únicamente en circuitos de 120 V CA.
• Este producto debe ser instalado de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y el funcionamiento del producto y los peligros involucrados.
• Asegúrese de que todas las conexiones eléctricas sean seguras y correctas.
• Do not modify the fixture or use it for any purpose other than its intended use.
• No manipule el aparato con las manos mojadas.
• Adecuado para damp Ubicaciones.

4. Instrucciones de instalación

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Instalación de la caja de conexiones

1. Apague la energía: Asegúrese de que la energía esté desconectada en el disyuntor antes de comenzar.
2. Retire la lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Conecte el cableado: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Restaurar energía: Vuelva a conectar la energía en el disyuntor.

4.2. Recessed Can Installation

1. Apague la energía: Asegúrese de que la energía esté desconectada en el disyuntor antes de comenzar.
2. Retire la lente: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Conecte el cableado: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Restaurar energía: Vuelva a conectar la energía en el disyuntor.

5. Instrucciones de funcionamiento

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Encendido/Apagado

Opere la luz utilizando un interruptor de pared estándar conectado al circuito del artefacto.

5.2. Función de atenuación

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Mantenimiento

The ECOELER LED Disk Light requires minimal maintenance.

• Limpieza: Para limpiar el dispositivo, asegúrese de que esté apagado. Use un paño suave, seco o ligeramente húmedo.amp Paño. No utilice productos químicos agresivos ni limpiadores abrasivos, ya que pueden dañar el acabado o los componentes eléctricos.
• No hay piezas que el usuario pueda reparar: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Solución de problemas

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Especificaciones

9. Garantía y soporte

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Garantía: Refer to the product packaging or ECOELER's official webSitio para conocer los términos y condiciones específicos de la garantía.
• Atención al cliente: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.