SanJie DS17 Wireless Door Chime Instruction Manual

Introducción

The SanJie DS17 Wireless Door Chime is a versatile contact sensor alarm system designed to alert you when a door or window is opened. Ideal for homes, businesses, offices, or stores, this system provides enhanced awareness and security. It features a long wireless range, multiple chime options, and adjustable volume levels to suit various environments and needs.

Contenido del paquete

Verifique que todos los componentes estén presentes en su paquete:

• 2 x Receivers (Plug-in Chime Units)
• 2 x Sensors (Magnetic Contact Sensors)
• Adhesive Tape (for sensor mounting)
• Screws (for optional sensor mounting)
• Manual del producto

Image: Components included in the SanJie Door Chime package, showing two receivers, two sensors, adhesive tape, screws, and the manual.

Configuración e instalación

1. Instalación del receptor

1. Plug the receiver unit into a standard electrical outlet in your desired location. The unit will emit a default chime sound upon initial power-up.

Image: A hand plugging the receiver unit into a wall socket, illustrating the first step of installation.

2. Instalación de sensores

The door sensor consists of two parts: a main sensor unit and a smaller magnetic unit. These two parts must be aligned closely (less than 0.4 inches apart) when the door/window is closed.

1. Ensure the sensor unit is switched ON (if applicable, some models have an on/off switch).
2. Attach the two parts of the door sensor onto your door/window and its frame using either the provided double-sided adhesive tape or screws. Ensure the main sensor unit is on the fixed frame and the magnetic unit is on the moving part (door/window).
3. Verify that the gap between the two sensor parts is less than 0.4 inches (approximately 1 cm) when the door/window is closed. When the door/window opens, the two parts separate, triggering the chime.

Image: A step-by-step visual guide on how to install the SanJie door chime sensor using adhesive tape, showing proper alignment and gap requirements.

Instrucciones de funcionamiento

Ajuste del volumen

The receiver unit has 5 adjustable volume levels, ranging from mute to 110dB. Press the Volume +/- buttons on the side of the receiver to cycle through the volume options.

Changing Chimes

The system offers 26 different chimes. Use the Forward and Back buttons on the receiver to select your preferred ringtone. The receiver has a memory function that retains the last selected tune even after being unplugged.

Pairing Additional Sensors/Receivers

Your units come pre-paired. If you wish to pair additional sensors or receivers, or re-pair existing ones:

1. Conecte la unidad receptora.
2. Press and hold the Volume (Set) button on the receiver until the LED light emits a ding to enter pairing mode.
3. Quickly separate the door sensor from its magnetic counterpart. The door sensor indicator light will flash, and the receiver will make a "dingding" sound, indicating successful pairing.
4. To pair multiple sensors/receivers, repeat the above pairing process for each unit. You can also pair different ringtones to each sensor to identify which door is triggered.

Imagen: Detallada view of the receiver and sensor, highlighting the LED indicators, volume controls, and chime selection buttons.

Mantenimiento

Reemplazo de batería (sensores)

The sensors require 12V batteries. When the sensor's indicator light no longer flashes or the chime unit does not respond to the sensor, it is time to replace the battery. Use a small screwdriver (often included) to open the sensor casing and replace the battery. The average battery life is approximately 1 year.

Limpieza

Limpie las unidades con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.

Solución de problemas

• No chime sound: Ensure the receiver is plugged in and powered on. Check the volume level. Verify the sensor battery is not depleted. Re-pair the sensor and receiver if necessary.
• Corto alcance: Ensure there are no major obstructions (thick walls, large metal objects) between the sensor and receiver. The maximum range is 500 feet in open areas, but indoor range may be reduced.
• Falsas alarmas: Check that the sensor parts are securely mounted and the gap is correct when the door/window is closed. Ensure the sensor is not exposed to extreme vibrations.

Presupuesto

Garantía y soporte

Información de garantía

The SanJie Door Chime comes with a lifetime warranty. For any product issues, please contact customer service through your order details.

Servicio al cliente

For assistance with setup, troubleshooting, or any other inquiries, please refer to the contact information provided with your purchase or on the official SanJie website. Free return and exchange are available within 30 days of purchase.