Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On Instruction Manual

Introducción

This manual provides essential information for the safe assembly, operation, and maintenance of your Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On. Please read all instructions carefully before assembly and use. Adult supervision is required at all times.

Información de seguridad

• Se requiere la supervisión de un adulto.
• Always ensure your child wears a helmet when operating the ride-on. (Helmet not included).
• This product contains small parts prior to assembly, posing a peligro de asfixia to children under 3 years of age. Keep unassembled parts away from young children.
• Recommended for toddlers aged 2-4 years.
• Límite de peso máximo: 35 libras.
• Asegúrese de que todas las piezas estén bien fijadas antes de cada uso.
• Use on flat, level surfaces away from traffic, stairs, and steep inclines.

Contenido del paquete

Verify all components are present before beginning assembly. Refer to the included printed instruction sheet for a detailed parts list.

• Main body/chassis
• Front wheel with pedals
• Ruedas traseras (2)
• Manillar
• barra de eje
• Fasteners and caps
• Hoja de pegatinas

Instrucciones de montaje

Adult assembly is required. You will need a hammer and a screwdriver (not included) for assembly. Please follow the steps below carefully.

1. Instalación de las ruedas traseras

Insert the axle rod through the designated holes in the main body. Secure the rear wheels onto the axle rod, ensuring they are firmly in place. Use the provided caps and tap gently with a hammer if needed to secure.

2. Instalación de los pedales

Attach the pedals to the front wheel assembly. Ensure they fit snugly and are securely fastened. Tap into place with a hammer if necessary.

3. Construcción del chasis

Connect the front fork assembly (with the front wheel and pedals) to the main body of the ride-on. Align the components and secure them using the provided screws. Do not overtighten.

4. Attaching Handlebars

Place the handlebars onto the steering column. Secure them with the appropriate fasteners, ensuring they are stable and allow for smooth steering. Do not overtighten.

5. Aplicación de pegatinas

Personalize your ride-on by applying the Frozen 2 character graphics stickers as desired. Ensure surfaces are clean and dry before application for best adhesion.

Imagen: Lado view of the assembled Disney Frozen 2 Fly Wheels 10 inch Junior Cruiser Ride-On.

Instrucciones de funcionamiento

The Disney Frozen 2 Fly Wheels Junior Cruiser is designed for young riders to enjoy. Its low center of gravity and easy-grip handlebars provide stability and control.

• Equitación: Children can propel the ride-on by pedaling with their feet or by pushing off the ground.
• Efectos sonoros: Press the push button located on the handlebars to activate exhilarating sounds and tunes.

Mantenimiento

• Inspeccione periódicamente todos los sujetadores y conexiones para asegurarse de que estén ajustados y seguros.
• Limpiar el ride-on con adamp paño y jabón suave. Evite los productos químicos agresivos.
• Store the ride-on in a dry place away from direct sunlight to prevent material degradation.

Solución de problemas

• Piezas sueltas: If any parts become loose, re-tighten them immediately.
• Los efectos de sonido no funcionan: Compruebe que las baterías estén correctamente instaladas y tengan suficiente carga. Reemplácelas si es necesario.
• Difficulty steering/pedaling: Ensure all assembly steps were followed correctly and no parts are obstructed.

Presupuesto

• Dimensiones del producto: 23.7 en L x W x 14.92 en 14.8 en H
• Peso del artículo: 5.04 libras
• Número de modelo del artículo: 600251-2
• Edad recomendada por el fabricante: 24 meses - 5 años
• Límite de peso: 35 libras
• Tamaño de la rueda delantera: 10 pulgadas

Imagen: Diagrama de dimensiones del producto.

Atención al cliente

For missing or broken parts, or any other inquiries, please contact customer service.

• Schylling Customer Service: 800-541-2929